steps in preparing research report

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Starting the research process

A Beginner's Guide to Starting the Research Process

When you have to write a thesis or dissertation , it can be hard to know where to begin, but there are some clear steps you can follow.

The research process often begins with a very broad idea for a topic you’d like to know more about. You do some preliminary research to identify a  problem . After refining your research questions , you can lay out the foundations of your research design , leading to a proposal that outlines your ideas and plans.

This article takes you through the first steps of the research process, helping you narrow down your ideas and build up a strong foundation for your research project.

Table of contents

Step 1: choose your topic, step 2: identify a problem, step 3: formulate research questions, step 4: create a research design, step 5: write a research proposal, other interesting articles.

First you have to come up with some ideas. Your thesis or dissertation topic can start out very broad. Think about the general area or field you’re interested in—maybe you already have specific research interests based on classes you’ve taken, or maybe you had to consider your topic when applying to graduate school and writing a statement of purpose .

Even if you already have a good sense of your topic, you’ll need to read widely to build background knowledge and begin narrowing down your ideas. Conduct an initial literature review to begin gathering relevant sources. As you read, take notes and try to identify problems, questions, debates, contradictions and gaps. Your aim is to narrow down from a broad area of interest to a specific niche.

Make sure to consider the practicalities: the requirements of your programme, the amount of time you have to complete the research, and how difficult it will be to access sources and data on the topic. Before moving onto the next stage, it’s a good idea to discuss the topic with your thesis supervisor.

>>Read more about narrowing down a research topic

Prevent plagiarism. Run a free check.

So you’ve settled on a topic and found a niche—but what exactly will your research investigate, and why does it matter? To give your project focus and purpose, you have to define a research problem .

The problem might be a practical issue—for example, a process or practice that isn’t working well, an area of concern in an organization’s performance, or a difficulty faced by a specific group of people in society.

Alternatively, you might choose to investigate a theoretical problem—for example, an underexplored phenomenon or relationship, a contradiction between different models or theories, or an unresolved debate among scholars.

To put the problem in context and set your objectives, you can write a problem statement . This describes who the problem affects, why research is needed, and how your research project will contribute to solving it.

>>Read more about defining a research problem

Next, based on the problem statement, you need to write one or more research questions . These target exactly what you want to find out. They might focus on describing, comparing, evaluating, or explaining the research problem.

A strong research question should be specific enough that you can answer it thoroughly using appropriate qualitative or quantitative research methods. It should also be complex enough to require in-depth investigation, analysis, and argument. Questions that can be answered with “yes/no” or with easily available facts are not complex enough for a thesis or dissertation.

In some types of research, at this stage you might also have to develop a conceptual framework and testable hypotheses .

>>See research question examples

The research design is a practical framework for answering your research questions. It involves making decisions about the type of data you need, the methods you’ll use to collect and analyze it, and the location and timescale of your research.

There are often many possible paths you can take to answering your questions. The decisions you make will partly be based on your priorities. For example, do you want to determine causes and effects, draw generalizable conclusions, or understand the details of a specific context?

You need to decide whether you will use primary or secondary data and qualitative or quantitative methods . You also need to determine the specific tools, procedures, and materials you’ll use to collect and analyze your data, as well as your criteria for selecting participants or sources.

>>Read more about creating a research design

Finally, after completing these steps, you are ready to complete a research proposal . The proposal outlines the context, relevance, purpose, and plan of your research.

As well as outlining the background, problem statement, and research questions, the proposal should also include a literature review that shows how your project will fit into existing work on the topic. The research design section describes your approach and explains exactly what you will do.

You might have to get the proposal approved by your supervisor before you get started, and it will guide the process of writing your thesis or dissertation.

>>Read more about writing a research proposal

If you want to know more about the research process , methodology , research bias , or statistics , make sure to check out some of our other articles with explanations and examples.

Methodology

• Sampling methods
• Simple random sampling
• Stratified sampling
• Cluster sampling
• Likert scales
• Reproducibility

 Statistics

• Null hypothesis
• Statistical power
• Probability distribution
• Effect size
• Poisson distribution

Research bias

• Optimism bias
• Cognitive bias
• Implicit bias
• Hawthorne effect
• Anchoring bias
• Explicit bias

Is this article helpful?

Other students also liked.

• Writing Strong Research Questions | Criteria & Examples

What Is a Research Design | Types, Guide & Examples

• How to Write a Research Proposal | Examples & Templates

More interesting articles

• 10 Research Question Examples to Guide Your Research Project
• How to Choose a Dissertation Topic | 8 Steps to Follow
• How to Define a Research Problem | Ideas & Examples
• How to Write a Problem Statement | Guide & Examples
• Relevance of Your Dissertation Topic | Criteria & Tips
• Research Objectives | Definition & Examples
• What Is a Fishbone Diagram? | Templates & Examples
• What Is Root Cause Analysis? | Definition & Examples

"I thought AI Proofreading was useless but.."

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

Chapter 11: Presenting Your Research

Writing a Research Report in American Psychological Association (APA) Style

Learning Objectives

• Identify the major sections of an APA-style research report and the basic contents of each section.
• Plan and write an effective APA-style research report.

In this section, we look at how to write an APA-style empirical research report , an article that presents the results of one or more new studies. Recall that the standard sections of an empirical research report provide a kind of outline. Here we consider each of these sections in detail, including what information it contains, how that information is formatted and organized, and tips for writing each section. At the end of this section is a sample APA-style research report that illustrates many of these principles.

Sections of a Research Report

Title page and abstract.

An APA-style research report begins with a  title page . The title is centred in the upper half of the page, with each important word capitalized. The title should clearly and concisely (in about 12 words or fewer) communicate the primary variables and research questions. This sometimes requires a main title followed by a subtitle that elaborates on the main title, in which case the main title and subtitle are separated by a colon. Here are some titles from recent issues of professional journals published by the American Psychological Association.

• Sex Differences in Coping Styles and Implications for Depressed Mood
• Effects of Aging and Divided Attention on Memory for Items and Their Contexts
• Computer-Assisted Cognitive Behavioural Therapy for Child Anxiety: Results of a Randomized Clinical Trial
• Virtual Driving and Risk Taking: Do Racing Games Increase Risk-Taking Cognitions, Affect, and Behaviour?

Below the title are the authors’ names and, on the next line, their institutional affiliation—the university or other institution where the authors worked when they conducted the research. As we have already seen, the authors are listed in an order that reflects their contribution to the research. When multiple authors have made equal contributions to the research, they often list their names alphabetically or in a randomly determined order.

In some areas of psychology, the titles of many empirical research reports are informal in a way that is perhaps best described as “cute.” They usually take the form of a play on words or a well-known expression that relates to the topic under study. Here are some examples from recent issues of the Journal Psychological Science .

• “Smells Like Clean Spirit: Nonconscious Effects of Scent on Cognition and Behavior”
• “Time Crawls: The Temporal Resolution of Infants’ Visual Attention”
• “Scent of a Woman: Men’s Testosterone Responses to Olfactory Ovulation Cues”
• “Apocalypse Soon?: Dire Messages Reduce Belief in Global Warming by Contradicting Just-World Beliefs”
• “Serial vs. Parallel Processing: Sometimes They Look Like Tweedledum and Tweedledee but They Can (and Should) Be Distinguished”
• “How Do I Love Thee? Let Me Count the Words: The Social Effects of Expressive Writing”

Individual researchers differ quite a bit in their preference for such titles. Some use them regularly, while others never use them. What might be some of the pros and cons of using cute article titles?

For articles that are being submitted for publication, the title page also includes an author note that lists the authors’ full institutional affiliations, any acknowledgments the authors wish to make to agencies that funded the research or to colleagues who commented on it, and contact information for the authors. For student papers that are not being submitted for publication—including theses—author notes are generally not necessary.

The  abstract  is a summary of the study. It is the second page of the manuscript and is headed with the word  Abstract . The first line is not indented. The abstract presents the research question, a summary of the method, the basic results, and the most important conclusions. Because the abstract is usually limited to about 200 words, it can be a challenge to write a good one.

Introduction

The  introduction  begins on the third page of the manuscript. The heading at the top of this page is the full title of the manuscript, with each important word capitalized as on the title page. The introduction includes three distinct subsections, although these are typically not identified by separate headings. The opening introduces the research question and explains why it is interesting, the literature review discusses relevant previous research, and the closing restates the research question and comments on the method used to answer it.

The Opening

The  opening , which is usually a paragraph or two in length, introduces the research question and explains why it is interesting. To capture the reader’s attention, researcher Daryl Bem recommends starting with general observations about the topic under study, expressed in ordinary language (not technical jargon)—observations that are about people and their behaviour (not about researchers or their research; Bem, 2003 [1] ). Concrete examples are often very useful here. According to Bem, this would be a poor way to begin a research report:

Festinger’s theory of cognitive dissonance received a great deal of attention during the latter part of the 20th century (p. 191)

The following would be much better:

The individual who holds two beliefs that are inconsistent with one another may feel uncomfortable. For example, the person who knows that he or she enjoys smoking but believes it to be unhealthy may experience discomfort arising from the inconsistency or disharmony between these two thoughts or cognitions. This feeling of discomfort was called cognitive dissonance by social psychologist Leon Festinger (1957), who suggested that individuals will be motivated to remove this dissonance in whatever way they can (p. 191).

After capturing the reader’s attention, the opening should go on to introduce the research question and explain why it is interesting. Will the answer fill a gap in the literature? Will it provide a test of an important theory? Does it have practical implications? Giving readers a clear sense of what the research is about and why they should care about it will motivate them to continue reading the literature review—and will help them make sense of it.

Breaking the Rules

Researcher Larry Jacoby reported several studies showing that a word that people see or hear repeatedly can seem more familiar even when they do not recall the repetitions—and that this tendency is especially pronounced among older adults. He opened his article with the following humourous anecdote:

A friend whose mother is suffering symptoms of Alzheimer’s disease (AD) tells the story of taking her mother to visit a nursing home, preliminary to her mother’s moving there. During an orientation meeting at the nursing home, the rules and regulations were explained, one of which regarded the dining room. The dining room was described as similar to a fine restaurant except that tipping was not required. The absence of tipping was a central theme in the orientation lecture, mentioned frequently to emphasize the quality of care along with the advantages of having paid in advance. At the end of the meeting, the friend’s mother was asked whether she had any questions. She replied that she only had one question: “Should I tip?” (Jacoby, 1999, p. 3)

Although both humour and personal anecdotes are generally discouraged in APA-style writing, this example is a highly effective way to start because it both engages the reader and provides an excellent real-world example of the topic under study.

The Literature Review

Immediately after the opening comes the  literature review , which describes relevant previous research on the topic and can be anywhere from several paragraphs to several pages in length. However, the literature review is not simply a list of past studies. Instead, it constitutes a kind of argument for why the research question is worth addressing. By the end of the literature review, readers should be convinced that the research question makes sense and that the present study is a logical next step in the ongoing research process.

Like any effective argument, the literature review must have some kind of structure. For example, it might begin by describing a phenomenon in a general way along with several studies that demonstrate it, then describing two or more competing theories of the phenomenon, and finally presenting a hypothesis to test one or more of the theories. Or it might describe one phenomenon, then describe another phenomenon that seems inconsistent with the first one, then propose a theory that resolves the inconsistency, and finally present a hypothesis to test that theory. In applied research, it might describe a phenomenon or theory, then describe how that phenomenon or theory applies to some important real-world situation, and finally suggest a way to test whether it does, in fact, apply to that situation.

Looking at the literature review in this way emphasizes a few things. First, it is extremely important to start with an outline of the main points that you want to make, organized in the order that you want to make them. The basic structure of your argument, then, should be apparent from the outline itself. Second, it is important to emphasize the structure of your argument in your writing. One way to do this is to begin the literature review by summarizing your argument even before you begin to make it. “In this article, I will describe two apparently contradictory phenomena, present a new theory that has the potential to resolve the apparent contradiction, and finally present a novel hypothesis to test the theory.” Another way is to open each paragraph with a sentence that summarizes the main point of the paragraph and links it to the preceding points. These opening sentences provide the “transitions” that many beginning researchers have difficulty with. Instead of beginning a paragraph by launching into a description of a previous study, such as “Williams (2004) found that…,” it is better to start by indicating something about why you are describing this particular study. Here are some simple examples:

Another example of this phenomenon comes from the work of Williams (2004).

Williams (2004) offers one explanation of this phenomenon.

An alternative perspective has been provided by Williams (2004).

We used a method based on the one used by Williams (2004).

Finally, remember that your goal is to construct an argument for why your research question is interesting and worth addressing—not necessarily why your favourite answer to it is correct. In other words, your literature review must be balanced. If you want to emphasize the generality of a phenomenon, then of course you should discuss various studies that have demonstrated it. However, if there are other studies that have failed to demonstrate it, you should discuss them too. Or if you are proposing a new theory, then of course you should discuss findings that are consistent with that theory. However, if there are other findings that are inconsistent with it, again, you should discuss them too. It is acceptable to argue that the  balance  of the research supports the existence of a phenomenon or is consistent with a theory (and that is usually the best that researchers in psychology can hope for), but it is not acceptable to  ignore contradictory evidence. Besides, a large part of what makes a research question interesting is uncertainty about its answer.

The Closing

The  closing  of the introduction—typically the final paragraph or two—usually includes two important elements. The first is a clear statement of the main research question or hypothesis. This statement tends to be more formal and precise than in the opening and is often expressed in terms of operational definitions of the key variables. The second is a brief overview of the method and some comment on its appropriateness. Here, for example, is how Darley and Latané (1968) [2] concluded the introduction to their classic article on the bystander effect:

These considerations lead to the hypothesis that the more bystanders to an emergency, the less likely, or the more slowly, any one bystander will intervene to provide aid. To test this proposition it would be necessary to create a situation in which a realistic “emergency” could plausibly occur. Each subject should also be blocked from communicating with others to prevent his getting information about their behaviour during the emergency. Finally, the experimental situation should allow for the assessment of the speed and frequency of the subjects’ reaction to the emergency. The experiment reported below attempted to fulfill these conditions. (p. 378)

Thus the introduction leads smoothly into the next major section of the article—the method section.

The  method section  is where you describe how you conducted your study. An important principle for writing a method section is that it should be clear and detailed enough that other researchers could replicate the study by following your “recipe.” This means that it must describe all the important elements of the study—basic demographic characteristics of the participants, how they were recruited, whether they were randomly assigned, how the variables were manipulated or measured, how counterbalancing was accomplished, and so on. At the same time, it should avoid irrelevant details such as the fact that the study was conducted in Classroom 37B of the Industrial Technology Building or that the questionnaire was double-sided and completed using pencils.

The method section begins immediately after the introduction ends with the heading “Method” (not “Methods”) centred on the page. Immediately after this is the subheading “Participants,” left justified and in italics. The participants subsection indicates how many participants there were, the number of women and men, some indication of their age, other demographics that may be relevant to the study, and how they were recruited, including any incentives given for participation.

After the participants section, the structure can vary a bit. Figure 11.1 shows three common approaches. In the first, the participants section is followed by a design and procedure subsection, which describes the rest of the method. This works well for methods that are relatively simple and can be described adequately in a few paragraphs. In the second approach, the participants section is followed by separate design and procedure subsections. This works well when both the design and the procedure are relatively complicated and each requires multiple paragraphs.

What is the difference between design and procedure? The design of a study is its overall structure. What were the independent and dependent variables? Was the independent variable manipulated, and if so, was it manipulated between or within subjects? How were the variables operationally defined? The procedure is how the study was carried out. It often works well to describe the procedure in terms of what the participants did rather than what the researchers did. For example, the participants gave their informed consent, read a set of instructions, completed a block of four practice trials, completed a block of 20 test trials, completed two questionnaires, and were debriefed and excused.

In the third basic way to organize a method section, the participants subsection is followed by a materials subsection before the design and procedure subsections. This works well when there are complicated materials to describe. This might mean multiple questionnaires, written vignettes that participants read and respond to, perceptual stimuli, and so on. The heading of this subsection can be modified to reflect its content. Instead of “Materials,” it can be “Questionnaires,” “Stimuli,” and so on.

The  results section  is where you present the main results of the study, including the results of the statistical analyses. Although it does not include the raw data—individual participants’ responses or scores—researchers should save their raw data and make them available to other researchers who request them. Several journals now encourage the open sharing of raw data online.

Although there are no standard subsections, it is still important for the results section to be logically organized. Typically it begins with certain preliminary issues. One is whether any participants or responses were excluded from the analyses and why. The rationale for excluding data should be described clearly so that other researchers can decide whether it is appropriate. A second preliminary issue is how multiple responses were combined to produce the primary variables in the analyses. For example, if participants rated the attractiveness of 20 stimulus people, you might have to explain that you began by computing the mean attractiveness rating for each participant. Or if they recalled as many items as they could from study list of 20 words, did you count the number correctly recalled, compute the percentage correctly recalled, or perhaps compute the number correct minus the number incorrect? A third preliminary issue is the reliability of the measures. This is where you would present test-retest correlations, Cronbach’s α, or other statistics to show that the measures are consistent across time and across items. A final preliminary issue is whether the manipulation was successful. This is where you would report the results of any manipulation checks.

The results section should then tackle the primary research questions, one at a time. Again, there should be a clear organization. One approach would be to answer the most general questions and then proceed to answer more specific ones. Another would be to answer the main question first and then to answer secondary ones. Regardless, Bem (2003) [3] suggests the following basic structure for discussing each new result:

• Remind the reader of the research question.
• Give the answer to the research question in words.
• Present the relevant statistics.
• Qualify the answer if necessary.
• Summarize the result.

Notice that only Step 3 necessarily involves numbers. The rest of the steps involve presenting the research question and the answer to it in words. In fact, the basic results should be clear even to a reader who skips over the numbers.

The  discussion  is the last major section of the research report. Discussions usually consist of some combination of the following elements:

• Summary of the research
• Theoretical implications
• Practical implications
• Limitations
• Suggestions for future research

The discussion typically begins with a summary of the study that provides a clear answer to the research question. In a short report with a single study, this might require no more than a sentence. In a longer report with multiple studies, it might require a paragraph or even two. The summary is often followed by a discussion of the theoretical implications of the research. Do the results provide support for any existing theories? If not, how  can  they be explained? Although you do not have to provide a definitive explanation or detailed theory for your results, you at least need to outline one or more possible explanations. In applied research—and often in basic research—there is also some discussion of the practical implications of the research. How can the results be used, and by whom, to accomplish some real-world goal?

The theoretical and practical implications are often followed by a discussion of the study’s limitations. Perhaps there are problems with its internal or external validity. Perhaps the manipulation was not very effective or the measures not very reliable. Perhaps there is some evidence that participants did not fully understand their task or that they were suspicious of the intent of the researchers. Now is the time to discuss these issues and how they might have affected the results. But do not overdo it. All studies have limitations, and most readers will understand that a different sample or different measures might have produced different results. Unless there is good reason to think they  would have, however, there is no reason to mention these routine issues. Instead, pick two or three limitations that seem like they could have influenced the results, explain how they could have influenced the results, and suggest ways to deal with them.

Most discussions end with some suggestions for future research. If the study did not satisfactorily answer the original research question, what will it take to do so? What  new  research questions has the study raised? This part of the discussion, however, is not just a list of new questions. It is a discussion of two or three of the most important unresolved issues. This means identifying and clarifying each question, suggesting some alternative answers, and even suggesting ways they could be studied.

Finally, some researchers are quite good at ending their articles with a sweeping or thought-provoking conclusion. Darley and Latané (1968) [4] , for example, ended their article on the bystander effect by discussing the idea that whether people help others may depend more on the situation than on their personalities. Their final sentence is, “If people understand the situational forces that can make them hesitate to intervene, they may better overcome them” (p. 383). However, this kind of ending can be difficult to pull off. It can sound overreaching or just banal and end up detracting from the overall impact of the article. It is often better simply to end when you have made your final point (although you should avoid ending on a limitation).

The references section begins on a new page with the heading “References” centred at the top of the page. All references cited in the text are then listed in the format presented earlier. They are listed alphabetically by the last name of the first author. If two sources have the same first author, they are listed alphabetically by the last name of the second author. If all the authors are the same, then they are listed chronologically by the year of publication. Everything in the reference list is double-spaced both within and between references.

Appendices, Tables, and Figures

Appendices, tables, and figures come after the references. An  appendix  is appropriate for supplemental material that would interrupt the flow of the research report if it were presented within any of the major sections. An appendix could be used to present lists of stimulus words, questionnaire items, detailed descriptions of special equipment or unusual statistical analyses, or references to the studies that are included in a meta-analysis. Each appendix begins on a new page. If there is only one, the heading is “Appendix,” centred at the top of the page. If there is more than one, the headings are “Appendix A,” “Appendix B,” and so on, and they appear in the order they were first mentioned in the text of the report.

After any appendices come tables and then figures. Tables and figures are both used to present results. Figures can also be used to illustrate theories (e.g., in the form of a flowchart), display stimuli, outline procedures, and present many other kinds of information. Each table and figure appears on its own page. Tables are numbered in the order that they are first mentioned in the text (“Table 1,” “Table 2,” and so on). Figures are numbered the same way (“Figure 1,” “Figure 2,” and so on). A brief explanatory title, with the important words capitalized, appears above each table. Each figure is given a brief explanatory caption, where (aside from proper nouns or names) only the first word of each sentence is capitalized. More details on preparing APA-style tables and figures are presented later in the book.

Sample APA-Style Research Report

Figures 11.2, 11.3, 11.4, and 11.5 show some sample pages from an APA-style empirical research report originally written by undergraduate student Tomoe Suyama at California State University, Fresno. The main purpose of these figures is to illustrate the basic organization and formatting of an APA-style empirical research report, although many high-level and low-level style conventions can be seen here too.

Key Takeaways

• An APA-style empirical research report consists of several standard sections. The main ones are the abstract, introduction, method, results, discussion, and references.
• The introduction consists of an opening that presents the research question, a literature review that describes previous research on the topic, and a closing that restates the research question and comments on the method. The literature review constitutes an argument for why the current study is worth doing.
• The method section describes the method in enough detail that another researcher could replicate the study. At a minimum, it consists of a participants subsection and a design and procedure subsection.
• The results section describes the results in an organized fashion. Each primary result is presented in terms of statistical results but also explained in words.
• The discussion typically summarizes the study, discusses theoretical and practical implications and limitations of the study, and offers suggestions for further research.
• Practice: Look through an issue of a general interest professional journal (e.g.,  Psychological Science ). Read the opening of the first five articles and rate the effectiveness of each one from 1 ( very ineffective ) to 5 ( very effective ). Write a sentence or two explaining each rating.
• Practice: Find a recent article in a professional journal and identify where the opening, literature review, and closing of the introduction begin and end.
• Practice: Find a recent article in a professional journal and highlight in a different colour each of the following elements in the discussion: summary, theoretical implications, practical implications, limitations, and suggestions for future research.

Long Descriptions

Figure 11.1 long description: Table showing three ways of organizing an APA-style method section.

In the simple method, there are two subheadings: “Participants” (which might begin “The participants were…”) and “Design and procedure” (which might begin “There were three conditions…”).

In the typical method, there are three subheadings: “Participants” (“The participants were…”), “Design” (“There were three conditions…”), and “Procedure” (“Participants viewed each stimulus on the computer screen…”).

In the complex method, there are four subheadings: “Participants” (“The participants were…”), “Materials” (“The stimuli were…”), “Design” (“There were three conditions…”), and “Procedure” (“Participants viewed each stimulus on the computer screen…”). [Return to Figure 11.1]

• Bem, D. J. (2003). Writing the empirical journal article. In J. M. Darley, M. P. Zanna, & H. R. Roediger III (Eds.),  The compleat academic: A practical guide for the beginning social scientist  (2nd ed.). Washington, DC: American Psychological Association. ↵
• Darley, J. M., & Latané, B. (1968). Bystander intervention in emergencies: Diffusion of responsibility.  Journal of Personality and Social Psychology, 4 , 377–383. ↵

A type of research article which describes one or more new empirical studies conducted by the authors.

The page at the beginning of an APA-style research report containing the title of the article, the authors’ names, and their institutional affiliation.

A summary of a research study.

The third page of a manuscript containing the research question, the literature review, and comments about how to answer the research question.

An introduction to the research question and explanation for why this question is interesting.

A description of relevant previous research on the topic being discusses and an argument for why the research is worth addressing.

The end of the introduction, where the research question is reiterated and the method is commented upon.

The section of a research report where the method used to conduct the study is described.

The main results of the study, including the results from statistical analyses, are presented in a research article.

Section of a research report that summarizes the study's results and interprets them by referring back to the study's theoretical background.

Part of a research report which contains supplemental material.

Research Methods in Psychology - 2nd Canadian Edition Copyright © 2015 by Paul C. Price, Rajiv Jhangiani, & I-Chant A. Chiang is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

Share This Book

• Research Report: Definition, Types + [Writing Guide]

One of the reasons for carrying out research is to add to the existing body of knowledge. Therefore, when conducting research, you need to document your processes and findings in a research report. 

With a research report, it is easy to outline the findings of your systematic investigation and any gaps needing further inquiry. Knowing how to create a detailed research report will prove useful when you need to conduct research.  

What is a Research Report?

A research report is a well-crafted document that outlines the processes, data, and findings of a systematic investigation. It is an important document that serves as a first-hand account of the research process, and it is typically considered an objective and accurate source of information.

In many ways, a research report can be considered as a summary of the research process that clearly highlights findings, recommendations, and other important details. Reading a well-written research report should provide you with all the information you need about the core areas of the research process.

Features of a Research Report 

So how do you recognize a research report when you see one? Here are some of the basic features that define a research report. 

• It is a detailed presentation of research processes and findings, and it usually includes tables and graphs. 
• It is written in a formal language.
• A research report is usually written in the third person.
• It is informative and based on first-hand verifiable information.
• It is formally structured with headings, sections, and bullet points.
• It always includes recommendations for future actions. 

Types of Research Report 

The research report is classified based on two things; nature of research and target audience.

Nature of Research

• Qualitative Research Report

This is the type of report written for qualitative research . It outlines the methods, processes, and findings of a qualitative method of systematic investigation. In educational research, a qualitative research report provides an opportunity for one to apply his or her knowledge and develop skills in planning and executing qualitative research projects.

A qualitative research report is usually descriptive in nature. Hence, in addition to presenting details of the research process, you must also create a descriptive narrative of the information.

• Quantitative Research Report

A quantitative research report is a type of research report that is written for quantitative research. Quantitative research is a type of systematic investigation that pays attention to numerical or statistical values in a bid to find answers to research questions. 

In this type of research report, the researcher presents quantitative data to support the research process and findings. Unlike a qualitative research report that is mainly descriptive, a quantitative research report works with numbers; that is, it is numerical in nature. 

Target Audience

Also, a research report can be said to be technical or popular based on the target audience. If you’re dealing with a general audience, you would need to present a popular research report, and if you’re dealing with a specialized audience, you would submit a technical report. 

• Technical Research Report

A technical research report is a detailed document that you present after carrying out industry-based research. This report is highly specialized because it provides information for a technical audience; that is, individuals with above-average knowledge in the field of study. 

In a technical research report, the researcher is expected to provide specific information about the research process, including statistical analyses and sampling methods. Also, the use of language is highly specialized and filled with jargon. 

Examples of technical research reports include legal and medical research reports. 

• Popular Research Report

A popular research report is one for a general audience; that is, for individuals who do not necessarily have any knowledge in the field of study. A popular research report aims to make information accessible to everyone. 

It is written in very simple language, which makes it easy to understand the findings and recommendations. Examples of popular research reports are the information contained in newspapers and magazines. 

Importance of a Research Report 

• Knowledge Transfer: As already stated above, one of the reasons for carrying out research is to contribute to the existing body of knowledge, and this is made possible with a research report. A research report serves as a means to effectively communicate the findings of a systematic investigation to all and sundry.  
• Identification of Knowledge Gaps: With a research report, you’d be able to identify knowledge gaps for further inquiry. A research report shows what has been done while hinting at other areas needing systematic investigation. 
• In market research, a research report would help you understand the market needs and peculiarities at a glance. 
• A research report allows you to present information in a precise and concise manner. 
• It is time-efficient and practical because, in a research report, you do not have to spend time detailing the findings of your research work in person. You can easily send out the report via email and have stakeholders look at it. 

Guide to Writing a Research Report

A lot of detail goes into writing a research report, and getting familiar with the different requirements would help you create the ideal research report. A research report is usually broken down into multiple sections, which allows for a concise presentation of information.

Structure and Example of a Research Report

This is the title of your systematic investigation. Your title should be concise and point to the aims, objectives, and findings of a research report. 

• Table of Contents

This is like a compass that makes it easier for readers to navigate the research report.

An abstract is an overview that highlights all important aspects of the research including the research method, data collection process, and research findings. Think of an abstract as a summary of your research report that presents pertinent information in a concise manner. 

An abstract is always brief; typically 100-150 words and goes straight to the point. The focus of your research abstract should be the 5Ws and 1H format – What, Where, Why, When, Who and How. 

• Introduction

Here, the researcher highlights the aims and objectives of the systematic investigation as well as the problem which the systematic investigation sets out to solve. When writing the report introduction, it is also essential to indicate whether the purposes of the research were achieved or would require more work.

In the introduction section, the researcher specifies the research problem and also outlines the significance of the systematic investigation. Also, the researcher is expected to outline any jargons and terminologies that are contained in the research.  

• Literature Review

A literature review is a written survey of existing knowledge in the field of study. In other words, it is the section where you provide an overview and analysis of different research works that are relevant to your systematic investigation. 

It highlights existing research knowledge and areas needing further investigation, which your research has sought to fill. At this stage, you can also hint at your research hypothesis and its possible implications for the existing body of knowledge in your field of study. 

• An Account of Investigation

This is a detailed account of the research process, including the methodology, sample, and research subjects. Here, you are expected to provide in-depth information on the research process including the data collection and analysis procedures. 

In a quantitative research report, you’d need to provide information surveys, questionnaires and other quantitative data collection methods used in your research. In a qualitative research report, you are expected to describe the qualitative data collection methods used in your research including interviews and focus groups. 

In this section, you are expected to present the results of the systematic investigation. 

This section further explains the findings of the research, earlier outlined. Here, you are expected to present a justification for each outcome and show whether the results are in line with your hypotheses or if other research studies have come up with similar results.

• Conclusions

This is a summary of all the information in the report. It also outlines the significance of the entire study. 

• References and Appendices

This section contains a list of all the primary and secondary research sources. 

Tips for Writing a Research Report

• Define the Context for the Report

As is obtainable when writing an essay, defining the context for your research report would help you create a detailed yet concise document. This is why you need to create an outline before writing so that you do not miss out on anything. 

• Define your Audience

Writing with your audience in mind is essential as it determines the tone of the report. If you’re writing for a general audience, you would want to present the information in a simple and relatable manner. For a specialized audience, you would need to make use of technical and field-specific terms. 

• Include Significant Findings

The idea of a research report is to present some sort of abridged version of your systematic investigation. In your report, you should exclude irrelevant information while highlighting only important data and findings. 

• Include Illustrations

Your research report should include illustrations and other visual representations of your data. Graphs, pie charts, and relevant images lend additional credibility to your systematic investigation.

• Choose the Right Title

A good research report title is brief, precise, and contains keywords from your research. It should provide a clear idea of your systematic investigation so that readers can grasp the entire focus of your research from the title. 

• Proofread the Report

Before publishing the document, ensure that you give it a second look to authenticate the information. If you can, get someone else to go through the report, too, and you can also run it through proofreading and editing software. 

How to Gather Research Data for Your Report  

• Understand the Problem

Every research aims at solving a specific problem or set of problems, and this should be at the back of your mind when writing your research report. Understanding the problem would help you to filter the information you have and include only important data in your report. 

• Know what your report seeks to achieve

This is somewhat similar to the point above because, in some way, the aim of your research report is intertwined with the objectives of your systematic investigation. Identifying the primary purpose of writing a research report would help you to identify and present the required information accordingly. 

• Identify your audience

Knowing your target audience plays a crucial role in data collection for a research report. If your research report is specifically for an organization, you would want to present industry-specific information or show how the research findings are relevant to the work that the company does. 

• Create Surveys/Questionnaires

A survey is a research method that is used to gather data from a specific group of people through a set of questions. It can be either quantitative or qualitative. 

A survey is usually made up of structured questions, and it can be administered online or offline. However, an online survey is a more effective method of research data collection because it helps you save time and gather data with ease. 

You can seamlessly create an online questionnaire for your research on Formplus . With the multiple sharing options available in the builder, you would be able to administer your survey to respondents in little or no time. 

Formplus also has a report summary too l that you can use to create custom visual reports for your research.

Step-by-step guide on how to create an online questionnaire using Formplus  

• Sign into Formplus

In the Formplus builder, you can easily create different online questionnaires for your research by dragging and dropping preferred fields into your form. To access the Formplus builder, you will need to create an account on Formplus. 

Once you do this, sign in to your account and click on Create new form to begin. 

• Edit Form Title : Click on the field provided to input your form title, for example, “Research Questionnaire.”
• Edit Form : Click on the edit icon to edit the form.
• Add Fields : Drag and drop preferred form fields into your form in the Formplus builder inputs column. There are several field input options for questionnaires in the Formplus builder. 
• Edit fields
• Click on “Save”
• Form Customization: With the form customization options in the form builder, you can easily change the outlook of your form and make it more unique and personalized. Formplus allows you to change your form theme, add background images, and even change the font according to your needs. 
• Multiple Sharing Options: Formplus offers various form-sharing options, which enables you to share your questionnaire with respondents easily. You can use the direct social media sharing buttons to share your form link to your organization’s social media pages.  You can also send out your survey form as email invitations to your research subjects too. If you wish, you can share your form’s QR code or embed it on your organization’s website for easy access. 

Conclusion  

Always remember that a research report is just as important as the actual systematic investigation because it plays a vital role in communicating research findings to everyone else. This is why you must take care to create a concise document summarizing the process of conducting any research. 

In this article, we’ve outlined essential tips to help you create a research report. When writing your report, you should always have the audience at the back of your mind, as this would set the tone for the document. 

Connect to Formplus, Get Started Now - It's Free!

• ethnographic research survey
• research report
• research report survey
• busayo.longe

You may also like:

How to Write a Problem Statement for your Research

Learn how to write problem statements before commencing any research effort. Learn about its structure and explore examples

Assessment Tools: Types, Examples & Importance

In this article, you’ll learn about different assessment tools to help you evaluate performance in various contexts

Ethnographic Research: Types, Methods + [Question Examples]

Simple guide on ethnographic research, it types, methods, examples and advantages. Also highlights how to conduct an ethnographic...

21 Chrome Extensions for Academic Researchers in 2022

In this article, we will discuss a number of chrome extensions you can use to make your research process even seamless

Formplus - For Seamless Data Collection

Collect data the right way with a versatile data collection tool. try formplus and transform your work productivity today..

Basic Steps in the Research Process

The following steps outline a simple and effective strategy for writing a research paper. Depending on your familiarity with the topic and the challenges you encounter along the way, you may need to rearrange these steps.

Step 1: Identify and develop your topic

Selecting a topic can be the most challenging part of a research assignment. Since this is the very first step in writing a paper, it is vital that it be done correctly. Here are some tips for selecting a topic:

• Select a topic within the parameters set by the assignment. Many times your instructor will give you clear guidelines as to what you can and cannot write about. Failure to work within these guidelines may result in your proposed paper being deemed unacceptable by your instructor.
• Select a topic of personal interest to you and learn more about it. The research for and writing of a paper will be more enjoyable if you are writing about something that you find interesting.
• Select a topic for which you can find a manageable amount of information. Do a preliminary search of information sources to determine whether existing sources will meet your needs. If you find too much information, you may need to narrow your topic; if you find too little, you may need to broaden your topic.
• Be original. Your instructor reads hundreds of research papers every year, and many of them are on the same topics (topics in the news at the time, controversial issues, subjects for which there is ample and easily accessed information). Stand out from your classmates by selecting an interesting and off-the-beaten-path topic.
• Still can't come up with a topic to write about? See your instructor for advice.

Once you have identified your topic, it may help to state it as a question. For example, if you are interested in finding out about the epidemic of obesity in the American population, you might pose the question "What are the causes of obesity in America ?" By posing your subject as a question you can more easily identify the main concepts or keywords to be used in your research.

Step 2 : Do a preliminary search for information

Before beginning your research in earnest, do a preliminary search to determine whether there is enough information out there for your needs and to set the context of your research. Look up your keywords in the appropriate titles in the library's Reference collection (such as encyclopedias and dictionaries) and in other sources such as our catalog of books, periodical databases, and Internet search engines. Additional background information may be found in your lecture notes, textbooks, and reserve readings. You may find it necessary to adjust the focus of your topic in light of the resources available to you.

Step 3: Locate materials

With the direction of your research now clear to you, you can begin locating material on your topic. There are a number of places you can look for information:

If you are looking for books, do a subject search in One Search . A Keyword search can be performed if the subject search doesn't yield enough information. Print or write down the citation information (author, title,etc.) and the location (call number and collection) of the item(s). Note the circulation status. When you locate the book on the shelf, look at the books located nearby; similar items are always shelved in the same area. The Aleph catalog also indexes the library's audio-visual holdings.

Use the library's  electronic periodical databases  to find magazine and newspaper articles. Choose the databases and formats best suited to your particular topic; ask at the librarian at the Reference Desk if you need help figuring out which database best meets your needs. Many of the articles in the databases are available in full-text format.

Use search engines ( Google ,  Yahoo , etc.) and subject directories to locate materials on the Internet. Check the  Internet Resources  section of the NHCC Library web site for helpful subject links.

Step 4: Evaluate your sources

See the  CARS Checklist for Information Quality   for tips on evaluating the authority and quality of the information you have located. Your instructor expects that you will provide credible, truthful, and reliable information and you have every right to expect that the sources you use are providing the same. This step is especially important when using Internet resources, many of which are regarded as less than reliable.

Step 5: Make notes

Consult the resources you have chosen and note the information that will be useful in your paper. Be sure to document all the sources you consult, even if you there is a chance you may not use that particular source. The author, title, publisher, URL, and other information will be needed later when creating a bibliography.

Step 6: Write your paper

Begin by organizing the information you have collected. The next step is the rough draft, wherein you get your ideas on paper in an unfinished fashion. This step will help you organize your ideas and determine the form your final paper will take. After this, you will revise the draft as many times as you think necessary to create a final product to turn in to your instructor.

Step 7: Cite your sources properly

Give credit where credit is due; cite your sources.

Citing or documenting the sources used in your research serves two purposes: it gives proper credit to the authors of the materials used, and it allows those who are reading your work to duplicate your research and locate the sources that you have listed as references. The  MLA  and the  APA  Styles are two popular citation formats.

Failure to cite your sources properly is plagiarism. Plagiarism is avoidable!

Step 8: Proofread

The final step in the process is to proofread the paper you have created. Read through the text and check for any errors in spelling, grammar, and punctuation. Make sure the sources you used are cited properly. Make sure the message that you want to get across to the reader has been thoroughly stated.

Additional research tips:

• Work from the general to the specific -- find background information first, then use more specific sources.
• Don't forget print sources -- many times print materials are more easily accessed and every bit as helpful as online resources.
• The library has books on the topic of writing research papers at call number area LB 2369.
• If you have questions about the assignment, ask your instructor.
• If you have any questions about finding information in the library, ask the librarian.

Contact Information

Craig larson.

Librarian 763-424-0733 [email protected] Zoom:  myzoom   Available by appointment

Get Started

Chapter 13 Writing a Research Report: Organisation and presentation

• January 2010

• University of Auckland

• HealthSearch

Abstract and Figures

Discover the world's research

• 25+ million members
• 160+ million publication pages
• 2.3+ billion citations

Supplementary resource (1)

• Brooke Arlidge
• Bruce Arroll

• Hiroshi Ono

• Michal Leneman
• L Wilkinson
• Task Force Statistical Inference
• QUAL HEALTH RES

• Creswell JW
• BRIT J CLIN PSYCHOL

• David L. Rennie

• D Silvermann
• E Annandale
• Recruit researchers
• Join for free
• Login Email Tip: Most researchers use their institutional email address as their ResearchGate login Password Forgot password? Keep me logged in Log in or Continue with Google Welcome back! Please log in. Email · Hint Tip: Most researchers use their institutional email address as their ResearchGate login Password Forgot password? Keep me logged in Log in or Continue with Google No account? Sign up

• Skip to main content
• Skip to primary sidebar
• Skip to footer
• QuestionPro

• Solutions Industries Gaming Automotive Sports and events Education Government Travel & Hospitality Financial Services Healthcare Cannabis Technology Use Case AskWhy Communities Audience Contactless surveys Mobile LivePolls Member Experience GDPR Positive People Science 360 Feedback Surveys
• Resources Blog eBooks Survey Templates Case Studies Training Help center

Home Market Research Research Tools and Apps

Research Process Steps: What they are + How To Follow

There are various approaches to conducting basic and applied research. This article explains the research process steps you should know. Whether you are doing basic research or applied research, there are many ways of doing it. In some ways, each research study is unique since it is conducted at a different time and place.

Conducting research might be difficult, but there are clear processes to follow. The research process starts with a broad idea for a topic. This article will assist you through the research process steps, helping you focus and develop your topic.

Research Process Steps

The research process consists of a series of systematic procedures that a researcher must go through in order to generate knowledge that will be considered valuable by the project and focus on the relevant topic.

To conduct effective research, you must understand the research process steps and follow them. Here are a few steps in the research process to make it easier for you:

Step 1: Identify the Problem

Finding an issue or formulating a research question is the first step. A well-defined research problem will guide the researcher through all stages of the research process, from setting objectives to choosing a technique. There are a number of approaches to get insight into a topic and gain a better understanding of it. Such as:

• A preliminary survey
• Case studies
• Interviews with a small group of people
• Observational survey

Step 2: Evaluate the Literature

A thorough examination of the relevant studies is essential to the research process . It enables the researcher to identify the precise aspects of the problem. Once a problem has been found, the investigator or researcher needs to find out more about it.

This stage gives problem-zone background. It teaches the investigator about previous research, how they were conducted, and its conclusions. The researcher can build consistency between his work and others through a literature review. Such a review exposes the researcher to a more significant body of knowledge and helps him follow the research process efficiently.

Step 3: Create Hypotheses

Formulating an original hypothesis is the next logical step after narrowing down the research topic and defining it. A belief solves logical relationships between variables. In order to establish a hypothesis, a researcher must have a certain amount of expertise in the field. 

It is important for researchers to keep in mind while formulating a hypothesis that it must be based on the research topic. Researchers are able to concentrate their efforts and stay committed to their objectives when they develop theories to guide their work.

Step 4: The Research Design

Research design is the plan for achieving objectives and answering research questions. It outlines how to get the relevant information. Its goal is to design research to test hypotheses, address the research questions, and provide decision-making insights.

The research design aims to minimize the time, money, and effort required to acquire meaningful evidence. This plan fits into four categories:

• Exploration and Surveys
• Data Analysis
• Observation

Step 5: Describe Population

Research projects usually look at a specific group of people, facilities, or how technology is used in the business. In research, the term population refers to this study group. The research topic and purpose help determine the study group.

Suppose a researcher wishes to investigate a certain group of people in the community. In that case, the research could target a specific age group, males or females, a geographic location, or an ethnic group. A final step in a study’s design is to specify its sample or population so that the results may be generalized.

Step 6: Data Collection

Data collection is important in obtaining the knowledge or information required to answer the research issue. Every research collected data, either from the literature or the people being studied. Data must be collected from the two categories of researchers. These sources may provide primary data.

• Questionnaire

Secondary data categories are:

• Literature survey
• Official, unofficial reports
• An approach based on library resources

Step 7: Data Analysis

During research design, the researcher plans data analysis. After collecting data, the researcher analyzes it. The data is examined based on the approach in this step. The research findings are reviewed and reported.

Data analysis involves a number of closely related stages, such as setting up categories, applying these categories to raw data through coding and tabulation, and then drawing statistical conclusions. The researcher can examine the acquired data using a variety of statistical methods.

Step 8: The Report-writing

After completing these steps, the researcher must prepare a report detailing his findings. The report must be carefully composed with the following in mind:

• The Layout: On the first page, the title, date, acknowledgments, and preface should be on the report. A table of contents should be followed by a list of tables, graphs, and charts if any.
• Introduction: It should state the research’s purpose and methods. This section should include the study’s scope and limits.
• Summary of Findings: A non-technical summary of findings and recommendations will follow the introduction. The findings should be summarized if they’re lengthy.
• Principal Report: The main body of the report should make sense and be broken up into sections that are easy to understand.
• Conclusion: The researcher should restate his findings at the end of the main text. It’s the final result.

LEARN ABOUT: 12 Best Tools for Researchers

The research process involves several steps that make it easy to complete the research successfully. The steps in the research process described above depend on each other, and the order must be kept. So, if we want to do a research project, we should follow the research process steps.

QuestionPro’s enterprise-grade research platform can collect survey and qualitative observation data. The tool’s nature allows for data processing and essential decisions. The platform lets you store and process data. Start immediately!

LEARN MORE         FREE TRIAL

MORE LIKE THIS

360 Degree Feedback Spider Chart is Back!

Aug 14, 2024

Jotform vs Wufoo: Comparison of Features and Prices

Aug 13, 2024

Product or Service: Which is More Important? — Tuesday CX Thoughts

Life@QuestionPro: Thomas Maiwald-Immer’s Experience

Aug 9, 2024

Other categories

• Academic Research
• Artificial Intelligence
• Assessments
• Brand Awareness
• Case Studies
• Communities
• Consumer Insights
• Customer effort score
• Customer Engagement
• Customer Experience
• Customer Loyalty
• Customer Research
• Customer Satisfaction
• Employee Benefits
• Employee Engagement
• Employee Retention
• Friday Five
• General Data Protection Regulation
• Insights Hub
• Life@QuestionPro
• Market Research
• Mobile diaries
• Mobile Surveys
• New Features
• Online Communities
• Question Types
• QuestionPro Products
• Release Notes
• Research Tools and Apps
• Revenue at Risk
• Survey Templates
• Training Tips
• Tuesday CX Thoughts (TCXT)
• Uncategorized
• What’s Coming Up
• Workforce Intelligence

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Yale J Biol Med
• v.84(3); 2011 Sep

Focus: Education — Career Advice

How to write your first research paper.

Writing a research manuscript is an intimidating process for many novice writers in the sciences. One of the stumbling blocks is the beginning of the process and creating the first draft. This paper presents guidelines on how to initiate the writing process and draft each section of a research manuscript. The paper discusses seven rules that allow the writer to prepare a well-structured and comprehensive manuscript for a publication submission. In addition, the author lists different strategies for successful revision. Each of those strategies represents a step in the revision process and should help the writer improve the quality of the manuscript. The paper could be considered a brief manual for publication.

It is late at night. You have been struggling with your project for a year. You generated an enormous amount of interesting data. Your pipette feels like an extension of your hand, and running western blots has become part of your daily routine, similar to brushing your teeth. Your colleagues think you are ready to write a paper, and your lab mates tease you about your “slow” writing progress. Yet days pass, and you cannot force yourself to sit down to write. You have not written anything for a while (lab reports do not count), and you feel you have lost your stamina. How does the writing process work? How can you fit your writing into a daily schedule packed with experiments? What section should you start with? What distinguishes a good research paper from a bad one? How should you revise your paper? These and many other questions buzz in your head and keep you stressed. As a result, you procrastinate. In this paper, I will discuss the issues related to the writing process of a scientific paper. Specifically, I will focus on the best approaches to start a scientific paper, tips for writing each section, and the best revision strategies.

1. Schedule your writing time in Outlook

Whether you have written 100 papers or you are struggling with your first, starting the process is the most difficult part unless you have a rigid writing schedule. Writing is hard. It is a very difficult process of intense concentration and brain work. As stated in Hayes’ framework for the study of writing: “It is a generative activity requiring motivation, and it is an intellectual activity requiring cognitive processes and memory” [ 1 ]. In his book How to Write a Lot: A Practical Guide to Productive Academic Writing , Paul Silvia says that for some, “it’s easier to embalm the dead than to write an article about it” [ 2 ]. Just as with any type of hard work, you will not succeed unless you practice regularly. If you have not done physical exercises for a year, only regular workouts can get you into good shape again. The same kind of regular exercises, or I call them “writing sessions,” are required to be a productive author. Choose from 1- to 2-hour blocks in your daily work schedule and consider them as non-cancellable appointments. When figuring out which blocks of time will be set for writing, you should select the time that works best for this type of work. For many people, mornings are more productive. One Yale University graduate student spent a semester writing from 8 a.m. to 9 a.m. when her lab was empty. At the end of the semester, she was amazed at how much she accomplished without even interrupting her regular lab hours. In addition, doing the hardest task first thing in the morning contributes to the sense of accomplishment during the rest of the day. This positive feeling spills over into our work and life and has a very positive effect on our overall attitude.

Rule 1: Create regular time blocks for writing as appointments in your calendar and keep these appointments.

2. start with an outline.

Now that you have scheduled time, you need to decide how to start writing. The best strategy is to start with an outline. This will not be an outline that you are used to, with Roman numerals for each section and neat parallel listing of topic sentences and supporting points. This outline will be similar to a template for your paper. Initially, the outline will form a structure for your paper; it will help generate ideas and formulate hypotheses. Following the advice of George M. Whitesides, “. . . start with a blank piece of paper, and write down, in any order, all important ideas that occur to you concerning the paper” [ 3 ]. Use Table 1 as a starting point for your outline. Include your visuals (figures, tables, formulas, equations, and algorithms), and list your findings. These will constitute the first level of your outline, which will eventually expand as you elaborate.

The next stage is to add context and structure. Here you will group all your ideas into sections: Introduction, Methods, Results, and Discussion/Conclusion ( Table 2 ). This step will help add coherence to your work and sift your ideas.

Now that you have expanded your outline, you are ready for the next step: discussing the ideas for your paper with your colleagues and mentor. Many universities have a writing center where graduate students can schedule individual consultations and receive assistance with their paper drafts. Getting feedback during early stages of your draft can save a lot of time. Talking through ideas allows people to conceptualize and organize thoughts to find their direction without wasting time on unnecessary writing. Outlining is the most effective way of communicating your ideas and exchanging thoughts. Moreover, it is also the best stage to decide to which publication you will submit the paper. Many people come up with three choices and discuss them with their mentors and colleagues. Having a list of journal priorities can help you quickly resubmit your paper if your paper is rejected.

Rule 2: Create a detailed outline and discuss it with your mentor and peers.

3. continue with drafts.

After you get enough feedback and decide on the journal you will submit to, the process of real writing begins. Copy your outline into a separate file and expand on each of the points, adding data and elaborating on the details. When you create the first draft, do not succumb to the temptation of editing. Do not slow down to choose a better word or better phrase; do not halt to improve your sentence structure. Pour your ideas into the paper and leave revision and editing for later. As Paul Silvia explains, “Revising while you generate text is like drinking decaffeinated coffee in the early morning: noble idea, wrong time” [ 2 ].

Many students complain that they are not productive writers because they experience writer’s block. Staring at an empty screen is frustrating, but your screen is not really empty: You have a template of your article, and all you need to do is fill in the blanks. Indeed, writer’s block is a logical fallacy for a scientist ― it is just an excuse to procrastinate. When scientists start writing a research paper, they already have their files with data, lab notes with materials and experimental designs, some visuals, and tables with results. All they need to do is scrutinize these pieces and put them together into a comprehensive paper.

3.1. Starting with Materials and Methods

If you still struggle with starting a paper, then write the Materials and Methods section first. Since you have all your notes, it should not be problematic for you to describe the experimental design and procedures. Your most important goal in this section is to be as explicit as possible by providing enough detail and references. In the end, the purpose of this section is to allow other researchers to evaluate and repeat your work. So do not run into the same problems as the writers of the sentences in (1):

1a. Bacteria were pelleted by centrifugation. 1b. To isolate T cells, lymph nodes were collected.

As you can see, crucial pieces of information are missing: the speed of centrifuging your bacteria, the time, and the temperature in (1a); the source of lymph nodes for collection in (b). The sentences can be improved when information is added, as in (2a) and (2b), respectfully:

2a. Bacteria were pelleted by centrifugation at 3000g for 15 min at 25°C. 2b. To isolate T cells, mediastinal and mesenteric lymph nodes from Balb/c mice were collected at day 7 after immunization with ovabumin.

If your method has previously been published and is well-known, then you should provide only the literature reference, as in (3a). If your method is unpublished, then you need to make sure you provide all essential details, as in (3b).

3a. Stem cells were isolated, according to Johnson [23]. 3b. Stem cells were isolated using biotinylated carbon nanotubes coated with anti-CD34 antibodies.

Furthermore, cohesion and fluency are crucial in this section. One of the malpractices resulting in disrupted fluency is switching from passive voice to active and vice versa within the same paragraph, as shown in (4). This switching misleads and distracts the reader.

4. Behavioral computer-based experiments of Study 1 were programmed by using E-Prime. We took ratings of enjoyment, mood, and arousal as the patients listened to preferred pleasant music and unpreferred music by using Visual Analogue Scales (SI Methods). The preferred and unpreferred status of the music was operationalized along a continuum of pleasantness [ 4 ].

The problem with (4) is that the reader has to switch from the point of view of the experiment (passive voice) to the point of view of the experimenter (active voice). This switch causes confusion about the performer of the actions in the first and the third sentences. To improve the coherence and fluency of the paragraph above, you should be consistent in choosing the point of view: first person “we” or passive voice [ 5 ]. Let’s consider two revised examples in (5).

5a. We programmed behavioral computer-based experiments of Study 1 by using E-Prime. We took ratings of enjoyment, mood, and arousal by using Visual Analogue Scales (SI Methods) as the patients listened to preferred pleasant music and unpreferred music. We operationalized the preferred and unpreferred status of the music along a continuum of pleasantness. 5b. Behavioral computer-based experiments of Study 1 were programmed by using E-Prime. Ratings of enjoyment, mood, and arousal were taken as the patients listened to preferred pleasant music and unpreferred music by using Visual Analogue Scales (SI Methods). The preferred and unpreferred status of the music was operationalized along a continuum of pleasantness.

If you choose the point of view of the experimenter, then you may end up with repetitive “we did this” sentences. For many readers, paragraphs with sentences all beginning with “we” may also sound disruptive. So if you choose active sentences, you need to keep the number of “we” subjects to a minimum and vary the beginnings of the sentences [ 6 ].

Interestingly, recent studies have reported that the Materials and Methods section is the only section in research papers in which passive voice predominantly overrides the use of the active voice [ 5 , 7 , 8 , 9 ]. For example, Martínez shows a significant drop in active voice use in the Methods sections based on the corpus of 1 million words of experimental full text research articles in the biological sciences [ 7 ]. According to the author, the active voice patterned with “we” is used only as a tool to reveal personal responsibility for the procedural decisions in designing and performing experimental work. This means that while all other sections of the research paper use active voice, passive voice is still the most predominant in Materials and Methods sections.

Writing Materials and Methods sections is a meticulous and time consuming task requiring extreme accuracy and clarity. This is why when you complete your draft, you should ask for as much feedback from your colleagues as possible. Numerous readers of this section will help you identify the missing links and improve the technical style of this section.

Rule 3: Be meticulous and accurate in describing the Materials and Methods. Do not change the point of view within one paragraph.

3.2. writing results section.

For many authors, writing the Results section is more intimidating than writing the Materials and Methods section . If people are interested in your paper, they are interested in your results. That is why it is vital to use all your writing skills to objectively present your key findings in an orderly and logical sequence using illustrative materials and text.

Your Results should be organized into different segments or subsections where each one presents the purpose of the experiment, your experimental approach, data including text and visuals (tables, figures, schematics, algorithms, and formulas), and data commentary. For most journals, your data commentary will include a meaningful summary of the data presented in the visuals and an explanation of the most significant findings. This data presentation should not repeat the data in the visuals, but rather highlight the most important points. In the “standard” research paper approach, your Results section should exclude data interpretation, leaving it for the Discussion section. However, interpretations gradually and secretly creep into research papers: “Reducing the data, generalizing from the data, and highlighting scientific cases are all highly interpretive processes. It should be clear by now that we do not let the data speak for themselves in research reports; in summarizing our results, we interpret them for the reader” [ 10 ]. As a result, many journals including the Journal of Experimental Medicine and the Journal of Clinical Investigation use joint Results/Discussion sections, where results are immediately followed by interpretations.

Another important aspect of this section is to create a comprehensive and supported argument or a well-researched case. This means that you should be selective in presenting data and choose only those experimental details that are essential for your reader to understand your findings. You might have conducted an experiment 20 times and collected numerous records, but this does not mean that you should present all those records in your paper. You need to distinguish your results from your data and be able to discard excessive experimental details that could distract and confuse the reader. However, creating a picture or an argument should not be confused with data manipulation or falsification, which is a willful distortion of data and results. If some of your findings contradict your ideas, you have to mention this and find a plausible explanation for the contradiction.

In addition, your text should not include irrelevant and peripheral information, including overview sentences, as in (6).

6. To show our results, we first introduce all components of experimental system and then describe the outcome of infections.

Indeed, wordiness convolutes your sentences and conceals your ideas from readers. One common source of wordiness is unnecessary intensifiers. Adverbial intensifiers such as “clearly,” “essential,” “quite,” “basically,” “rather,” “fairly,” “really,” and “virtually” not only add verbosity to your sentences, but also lower your results’ credibility. They appeal to the reader’s emotions but lower objectivity, as in the common examples in (7):

7a. Table 3 clearly shows that … 7b. It is obvious from figure 4 that …

Another source of wordiness is nominalizations, i.e., nouns derived from verbs and adjectives paired with weak verbs including “be,” “have,” “do,” “make,” “cause,” “provide,” and “get” and constructions such as “there is/are.”

8a. We tested the hypothesis that there is a disruption of membrane asymmetry. 8b. In this paper we provide an argument that stem cells repopulate injured organs.

In the sentences above, the abstract nominalizations “disruption” and “argument” do not contribute to the clarity of the sentences, but rather clutter them with useless vocabulary that distracts from the meaning. To improve your sentences, avoid unnecessary nominalizations and change passive verbs and constructions into active and direct sentences.

9a. We tested the hypothesis that the membrane asymmetry is disrupted. 9b. In this paper we argue that stem cells repopulate injured organs.

Your Results section is the heart of your paper, representing a year or more of your daily research. So lead your reader through your story by writing direct, concise, and clear sentences.

Rule 4: Be clear, concise, and objective in describing your Results.

3.3. now it is time for your introduction.

Now that you are almost half through drafting your research paper, it is time to update your outline. While describing your Methods and Results, many of you diverged from the original outline and re-focused your ideas. So before you move on to create your Introduction, re-read your Methods and Results sections and change your outline to match your research focus. The updated outline will help you review the general picture of your paper, the topic, the main idea, and the purpose, which are all important for writing your introduction.

The best way to structure your introduction is to follow the three-move approach shown in Table 3 .

Adapted from Swales and Feak [ 11 ].

The moves and information from your outline can help to create your Introduction efficiently and without missing steps. These moves are traffic signs that lead the reader through the road of your ideas. Each move plays an important role in your paper and should be presented with deep thought and care. When you establish the territory, you place your research in context and highlight the importance of your research topic. By finding the niche, you outline the scope of your research problem and enter the scientific dialogue. The final move, “occupying the niche,” is where you explain your research in a nutshell and highlight your paper’s significance. The three moves allow your readers to evaluate their interest in your paper and play a significant role in the paper review process, determining your paper reviewers.

Some academic writers assume that the reader “should follow the paper” to find the answers about your methodology and your findings. As a result, many novice writers do not present their experimental approach and the major findings, wrongly believing that the reader will locate the necessary information later while reading the subsequent sections [ 5 ]. However, this “suspense” approach is not appropriate for scientific writing. To interest the reader, scientific authors should be direct and straightforward and present informative one-sentence summaries of the results and the approach.

Another problem is that writers understate the significance of the Introduction. Many new researchers mistakenly think that all their readers understand the importance of the research question and omit this part. However, this assumption is faulty because the purpose of the section is not to evaluate the importance of the research question in general. The goal is to present the importance of your research contribution and your findings. Therefore, you should be explicit and clear in describing the benefit of the paper.

The Introduction should not be long. Indeed, for most journals, this is a very brief section of about 250 to 600 words, but it might be the most difficult section due to its importance.

Rule 5: Interest your reader in the Introduction section by signalling all its elements and stating the novelty of the work.

3.4. discussion of the results.

For many scientists, writing a Discussion section is as scary as starting a paper. Most of the fear comes from the variation in the section. Since every paper has its unique results and findings, the Discussion section differs in its length, shape, and structure. However, some general principles of writing this section still exist. Knowing these rules, or “moves,” can change your attitude about this section and help you create a comprehensive interpretation of your results.

The purpose of the Discussion section is to place your findings in the research context and “to explain the meaning of the findings and why they are important, without appearing arrogant, condescending, or patronizing” [ 11 ]. The structure of the first two moves is almost a mirror reflection of the one in the Introduction. In the Introduction, you zoom in from general to specific and from the background to your research question; in the Discussion section, you zoom out from the summary of your findings to the research context, as shown in Table 4 .

Adapted from Swales and Feak and Hess [ 11 , 12 ].

The biggest challenge for many writers is the opening paragraph of the Discussion section. Following the moves in Table 1 , the best choice is to start with the study’s major findings that provide the answer to the research question in your Introduction. The most common starting phrases are “Our findings demonstrate . . .,” or “In this study, we have shown that . . .,” or “Our results suggest . . .” In some cases, however, reminding the reader about the research question or even providing a brief context and then stating the answer would make more sense. This is important in those cases where the researcher presents a number of findings or where more than one research question was presented. Your summary of the study’s major findings should be followed by your presentation of the importance of these findings. One of the most frequent mistakes of the novice writer is to assume the importance of his findings. Even if the importance is clear to you, it may not be obvious to your reader. Digesting the findings and their importance to your reader is as crucial as stating your research question.

Another useful strategy is to be proactive in the first move by predicting and commenting on the alternative explanations of the results. Addressing potential doubts will save you from painful comments about the wrong interpretation of your results and will present you as a thoughtful and considerate researcher. Moreover, the evaluation of the alternative explanations might help you create a logical step to the next move of the discussion section: the research context.

The goal of the research context move is to show how your findings fit into the general picture of the current research and how you contribute to the existing knowledge on the topic. This is also the place to discuss any discrepancies and unexpected findings that may otherwise distort the general picture of your paper. Moreover, outlining the scope of your research by showing the limitations, weaknesses, and assumptions is essential and adds modesty to your image as a scientist. However, make sure that you do not end your paper with the problems that override your findings. Try to suggest feasible explanations and solutions.

If your submission does not require a separate Conclusion section, then adding another paragraph about the “take-home message” is a must. This should be a general statement reiterating your answer to the research question and adding its scientific implications, practical application, or advice.

Just as in all other sections of your paper, the clear and precise language and concise comprehensive sentences are vital. However, in addition to that, your writing should convey confidence and authority. The easiest way to illustrate your tone is to use the active voice and the first person pronouns. Accompanied by clarity and succinctness, these tools are the best to convince your readers of your point and your ideas.

Rule 6: Present the principles, relationships, and generalizations in a concise and convincing tone.

4. choosing the best working revision strategies.

Now that you have created the first draft, your attitude toward your writing should have improved. Moreover, you should feel more confident that you are able to accomplish your project and submit your paper within a reasonable timeframe. You also have worked out your writing schedule and followed it precisely. Do not stop ― you are only at the midpoint from your destination. Just as the best and most precious diamond is no more than an unattractive stone recognized only by trained professionals, your ideas and your results may go unnoticed if they are not polished and brushed. Despite your attempts to present your ideas in a logical and comprehensive way, first drafts are frequently a mess. Use the advice of Paul Silvia: “Your first drafts should sound like they were hastily translated from Icelandic by a non-native speaker” [ 2 ]. The degree of your success will depend on how you are able to revise and edit your paper.

The revision can be done at the macrostructure and the microstructure levels [ 13 ]. The macrostructure revision includes the revision of the organization, content, and flow. The microstructure level includes individual words, sentence structure, grammar, punctuation, and spelling.

The best way to approach the macrostructure revision is through the outline of the ideas in your paper. The last time you updated your outline was before writing the Introduction and the Discussion. Now that you have the beginning and the conclusion, you can take a bird’s-eye view of the whole paper. The outline will allow you to see if the ideas of your paper are coherently structured, if your results are logically built, and if the discussion is linked to the research question in the Introduction. You will be able to see if something is missing in any of the sections or if you need to rearrange your information to make your point.

The next step is to revise each of the sections starting from the beginning. Ideally, you should limit yourself to working on small sections of about five pages at a time [ 14 ]. After these short sections, your eyes get used to your writing and your efficiency in spotting problems decreases. When reading for content and organization, you should control your urge to edit your paper for sentence structure and grammar and focus only on the flow of your ideas and logic of your presentation. Experienced researchers tend to make almost three times the number of changes to meaning than novice writers [ 15 , 16 ]. Revising is a difficult but useful skill, which academic writers obtain with years of practice.

In contrast to the macrostructure revision, which is a linear process and is done usually through a detailed outline and by sections, microstructure revision is a non-linear process. While the goal of the macrostructure revision is to analyze your ideas and their logic, the goal of the microstructure editing is to scrutinize the form of your ideas: your paragraphs, sentences, and words. You do not need and are not recommended to follow the order of the paper to perform this type of revision. You can start from the end or from different sections. You can even revise by reading sentences backward, sentence by sentence and word by word.

One of the microstructure revision strategies frequently used during writing center consultations is to read the paper aloud [ 17 ]. You may read aloud to yourself, to a tape recorder, or to a colleague or friend. When reading and listening to your paper, you are more likely to notice the places where the fluency is disrupted and where you stumble because of a very long and unclear sentence or a wrong connector.

Another revision strategy is to learn your common errors and to do a targeted search for them [ 13 ]. All writers have a set of problems that are specific to them, i.e., their writing idiosyncrasies. Remembering these problems is as important for an academic writer as remembering your friends’ birthdays. Create a list of these idiosyncrasies and run a search for these problems using your word processor. If your problem is demonstrative pronouns without summary words, then search for “this/these/those” in your text and check if you used the word appropriately. If you have a problem with intensifiers, then search for “really” or “very” and delete them from the text. The same targeted search can be done to eliminate wordiness. Searching for “there is/are” or “and” can help you avoid the bulky sentences.

The final strategy is working with a hard copy and a pencil. Print a double space copy with font size 14 and re-read your paper in several steps. Try reading your paper line by line with the rest of the text covered with a piece of paper. When you are forced to see only a small portion of your writing, you are less likely to get distracted and are more likely to notice problems. You will end up spotting more unnecessary words, wrongly worded phrases, or unparallel constructions.

After you apply all these strategies, you are ready to share your writing with your friends, colleagues, and a writing advisor in the writing center. Get as much feedback as you can, especially from non-specialists in your field. Patiently listen to what others say to you ― you are not expected to defend your writing or explain what you wanted to say. You may decide what you want to change and how after you receive the feedback and sort it in your head. Even though some researchers make the revision an endless process and can hardly stop after a 14th draft; having from five to seven drafts of your paper is a norm in the sciences. If you can’t stop revising, then set a deadline for yourself and stick to it. Deadlines always help.

Rule 7: Revise your paper at the macrostructure and the microstructure level using different strategies and techniques. Receive feedback and revise again.

5. it is time to submit.

It is late at night again. You are still in your lab finishing revisions and getting ready to submit your paper. You feel happy ― you have finally finished a year’s worth of work. You will submit your paper tomorrow, and regardless of the outcome, you know that you can do it. If one journal does not take your paper, you will take advantage of the feedback and resubmit again. You will have a publication, and this is the most important achievement.

What is even more important is that you have your scheduled writing time that you are going to keep for your future publications, for reading and taking notes, for writing grants, and for reviewing papers. You are not going to lose stamina this time, and you will become a productive scientist. But for now, let’s celebrate the end of the paper.

• Hayes JR. In: The Science of Writing: Theories, Methods, Individual Differences, and Applications. Levy CM, Ransdell SE, editors. Mahwah, NJ: Lawrence Erlbaum; 1996. A new framework for understanding cognition and affect in writing; pp. 1–28. [ Google Scholar ]
• Silvia PJ. How to Write a Lot. Washington, DC: American Psychological Association; 2007. [ Google Scholar ]
• Whitesides GM. Whitesides’ Group: Writing a Paper. Adv Mater. 2004; 16 (15):1375–1377. [ Google Scholar ]
• Soto D, Funes MJ, Guzmán-García A, Warbrick T, Rotshtein T, Humphreys GW. Pleasant music overcomes the loss of awareness in patients with visual neglect. Proc Natl Acad Sci USA. 2009; 106 (14):6011–6016. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• Hofmann AH. Scientific Writing and Communication. Papers, Proposals, and Presentations. New York: Oxford University Press; 2010. [ Google Scholar ]
• Zeiger M. Essentials of Writing Biomedical Research Papers. 2nd edition. San Francisco, CA: McGraw-Hill Companies, Inc.; 2000. [ Google Scholar ]
• Martínez I. Native and non-native writers’ use of first person pronouns in the different sections of biology research articles in English. Journal of Second Language Writing. 2005; 14 (3):174–190. [ Google Scholar ]
• Rodman L. The Active Voice In Scientific Articles: Frequency And Discourse Functions. Journal Of Technical Writing And Communication. 1994; 24 (3):309–331. [ Google Scholar ]
• Tarone LE, Dwyer S, Gillette S, Icke V. On the use of the passive in two astrophysics journal papers with extensions to other languages and other fields. English for Specific Purposes. 1998; 17 :113–132. [ Google Scholar ]
• Penrose AM, Katz SB. Writing in the sciences: Exploring conventions of scientific discourse. New York: St. Martin’s Press; 1998. [ Google Scholar ]
• Swales JM, Feak CB. Academic Writing for Graduate Students. 2nd edition. Ann Arbor: University of Michigan Press; 2004. [ Google Scholar ]
• Hess DR. How to Write an Effective Discussion. Respiratory Care. 2004; 29 (10):1238–1241. [ PubMed ] [ Google Scholar ]
• Belcher WL. Writing Your Journal Article in 12 Weeks: a guide to academic publishing success. Thousand Oaks, CA: SAGE Publications; 2009. [ Google Scholar ]
• Single PB. Demystifying Dissertation Writing: A Streamlined Process of Choice of Topic to Final Text. Virginia: Stylus Publishing LLC; 2010. [ Google Scholar ]
• Faigley L, Witte SP. Analyzing revision. Composition and Communication. 1981; 32 :400–414. [ Google Scholar ]
• Flower LS, Hayes JR, Carey L, Schriver KS, Stratman J. Detection, diagnosis, and the strategies of revision. College Composition and Communication. 1986; 37 (1):16–55. [ Google Scholar ]
• Young BR. In: A Tutor’s Guide: Helping Writers One to One. Rafoth B, editor. Portsmouth, NH: Boynton/Cook Publishers; 2005. Can You Proofread This? pp. 140–158. [ Google Scholar ]

• Privacy Policy

Home » Research Process – Steps, Examples and Tips

Research Process – Steps, Examples and Tips

Table of Contents

Research Process

Definition:

Research Process is a systematic and structured approach that involves the collection, analysis, and interpretation of data or information to answer a specific research question or solve a particular problem.

Research Process Steps

Research Process Steps are as follows:

Identify the Research Question or Problem

This is the first step in the research process. It involves identifying a problem or question that needs to be addressed. The research question should be specific, relevant, and focused on a particular area of interest.

Conduct a Literature Review

Once the research question has been identified, the next step is to conduct a literature review. This involves reviewing existing research and literature on the topic to identify any gaps in knowledge or areas where further research is needed. A literature review helps to provide a theoretical framework for the research and also ensures that the research is not duplicating previous work.

Formulate a Hypothesis or Research Objectives

Based on the research question and literature review, the researcher can formulate a hypothesis or research objectives. A hypothesis is a statement that can be tested to determine its validity, while research objectives are specific goals that the researcher aims to achieve through the research.

Design a Research Plan and Methodology

This step involves designing a research plan and methodology that will enable the researcher to collect and analyze data to test the hypothesis or achieve the research objectives. The research plan should include details on the sample size, data collection methods, and data analysis techniques that will be used.

Collect and Analyze Data

This step involves collecting and analyzing data according to the research plan and methodology. Data can be collected through various methods, including surveys, interviews, observations, or experiments. The data analysis process involves cleaning and organizing the data, applying statistical and analytical techniques to the data, and interpreting the results.

Interpret the Findings and Draw Conclusions

After analyzing the data, the researcher must interpret the findings and draw conclusions. This involves assessing the validity and reliability of the results and determining whether the hypothesis was supported or not. The researcher must also consider any limitations of the research and discuss the implications of the findings.

Communicate the Results

Finally, the researcher must communicate the results of the research through a research report, presentation, or publication. The research report should provide a detailed account of the research process, including the research question, literature review, research methodology, data analysis, findings, and conclusions. The report should also include recommendations for further research in the area.

Review and Revise

The research process is an iterative one, and it is important to review and revise the research plan and methodology as necessary. Researchers should assess the quality of their data and methods, reflect on their findings, and consider areas for improvement.

Ethical Considerations

Throughout the research process, ethical considerations must be taken into account. This includes ensuring that the research design protects the welfare of research participants, obtaining informed consent, maintaining confidentiality and privacy, and avoiding any potential harm to participants or their communities.

Dissemination and Application

The final step in the research process is to disseminate the findings and apply the research to real-world settings. Researchers can share their findings through academic publications, presentations at conferences, or media coverage. The research can be used to inform policy decisions, develop interventions, or improve practice in the relevant field.

Research Process Example

Following is a Research Process Example:

Research Question : What are the effects of a plant-based diet on athletic performance in high school athletes?

Step 1: Background Research Conduct a literature review to gain a better understanding of the existing research on the topic. Read academic articles and research studies related to plant-based diets, athletic performance, and high school athletes.

Step 2: Develop a Hypothesis Based on the literature review, develop a hypothesis that a plant-based diet positively affects athletic performance in high school athletes.

Step 3: Design the Study Design a study to test the hypothesis. Decide on the study population, sample size, and research methods. For this study, you could use a survey to collect data on dietary habits and athletic performance from a sample of high school athletes who follow a plant-based diet and a sample of high school athletes who do not follow a plant-based diet.

Step 4: Collect Data Distribute the survey to the selected sample and collect data on dietary habits and athletic performance.

Step 5: Analyze Data Use statistical analysis to compare the data from the two samples and determine if there is a significant difference in athletic performance between those who follow a plant-based diet and those who do not.

Step 6 : Interpret Results Interpret the results of the analysis in the context of the research question and hypothesis. Discuss any limitations or potential biases in the study design.

Step 7: Draw Conclusions Based on the results, draw conclusions about whether a plant-based diet has a significant effect on athletic performance in high school athletes. If the hypothesis is supported by the data, discuss potential implications and future research directions.

Step 8: Communicate Findings Communicate the findings of the study in a clear and concise manner. Use appropriate language, visuals, and formats to ensure that the findings are understood and valued.

Applications of Research Process

The research process has numerous applications across a wide range of fields and industries. Some examples of applications of the research process include:

• Scientific research: The research process is widely used in scientific research to investigate phenomena in the natural world and develop new theories or technologies. This includes fields such as biology, chemistry, physics, and environmental science.
• Social sciences : The research process is commonly used in social sciences to study human behavior, social structures, and institutions. This includes fields such as sociology, psychology, anthropology, and economics.
• Education: The research process is used in education to study learning processes, curriculum design, and teaching methodologies. This includes research on student achievement, teacher effectiveness, and educational policy.
• Healthcare: The research process is used in healthcare to investigate medical conditions, develop new treatments, and evaluate healthcare interventions. This includes fields such as medicine, nursing, and public health.
• Business and industry : The research process is used in business and industry to study consumer behavior, market trends, and develop new products or services. This includes market research, product development, and customer satisfaction research.
• Government and policy : The research process is used in government and policy to evaluate the effectiveness of policies and programs, and to inform policy decisions. This includes research on social welfare, crime prevention, and environmental policy.

Purpose of Research Process

The purpose of the research process is to systematically and scientifically investigate a problem or question in order to generate new knowledge or solve a problem. The research process enables researchers to:

• Identify gaps in existing knowledge: By conducting a thorough literature review, researchers can identify gaps in existing knowledge and develop research questions that address these gaps.
• Collect and analyze data : The research process provides a structured approach to collecting and analyzing data. Researchers can use a variety of research methods, including surveys, experiments, and interviews, to collect data that is valid and reliable.
• Test hypotheses : The research process allows researchers to test hypotheses and make evidence-based conclusions. Through the systematic analysis of data, researchers can draw conclusions about the relationships between variables and develop new theories or models.
• Solve problems: The research process can be used to solve practical problems and improve real-world outcomes. For example, researchers can develop interventions to address health or social problems, evaluate the effectiveness of policies or programs, and improve organizational processes.
• Generate new knowledge : The research process is a key way to generate new knowledge and advance understanding in a given field. By conducting rigorous and well-designed research, researchers can make significant contributions to their field and help to shape future research.

Tips for Research Process

Here are some tips for the research process:

• Start with a clear research question : A well-defined research question is the foundation of a successful research project. It should be specific, relevant, and achievable within the given time frame and resources.
• Conduct a thorough literature review: A comprehensive literature review will help you to identify gaps in existing knowledge, build on previous research, and avoid duplication. It will also provide a theoretical framework for your research.
• Choose appropriate research methods: Select research methods that are appropriate for your research question, objectives, and sample size. Ensure that your methods are valid, reliable, and ethical.
• Be organized and systematic: Keep detailed notes throughout the research process, including your research plan, methodology, data collection, and analysis. This will help you to stay organized and ensure that you don’t miss any important details.
• Analyze data rigorously: Use appropriate statistical and analytical techniques to analyze your data. Ensure that your analysis is valid, reliable, and transparent.
• I nterpret results carefully : Interpret your results in the context of your research question and objectives. Consider any limitations or potential biases in your research design, and be cautious in drawing conclusions.
• Communicate effectively: Communicate your research findings clearly and effectively to your target audience. Use appropriate language, visuals, and formats to ensure that your findings are understood and valued.
• Collaborate and seek feedback : Collaborate with other researchers, experts, or stakeholders in your field. Seek feedback on your research design, methods, and findings to ensure that they are relevant, meaningful, and impactful.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Research Methodology – Types, Examples and...

Research Findings – Types Examples and Writing...

Research Approach – Types Methods and Examples

Research Report – Example, Writing Guide and...

Research Project – Definition, Writing Guide and...

Dissertation – Format, Example and Template

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

11.2 Steps in Developing a Research Proposal

Learning objectives.

• Identify the steps in developing a research proposal.
• Choose a topic and formulate a research question and working thesis.
• Develop a research proposal.

Writing a good research paper takes time, thought, and effort. Although this assignment is challenging, it is manageable. Focusing on one step at a time will help you develop a thoughtful, informative, well-supported research paper.

Your first step is to choose a topic and then to develop research questions, a working thesis, and a written research proposal. Set aside adequate time for this part of the process. Fully exploring ideas will help you build a solid foundation for your paper.

Choosing a Topic

When you choose a topic for a research paper, you are making a major commitment. Your choice will help determine whether you enjoy the lengthy process of research and writing—and whether your final paper fulfills the assignment requirements. If you choose your topic hastily, you may later find it difficult to work with your topic. By taking your time and choosing carefully, you can ensure that this assignment is not only challenging but also rewarding.

Writers understand the importance of choosing a topic that fulfills the assignment requirements and fits the assignment’s purpose and audience. (For more information about purpose and audience, see Chapter 6 “Writing Paragraphs: Separating Ideas and Shaping Content” .) Choosing a topic that interests you is also crucial. You instructor may provide a list of suggested topics or ask that you develop a topic on your own. In either case, try to identify topics that genuinely interest you.

After identifying potential topic ideas, you will need to evaluate your ideas and choose one topic to pursue. Will you be able to find enough information about the topic? Can you develop a paper about this topic that presents and supports your original ideas? Is the topic too broad or too narrow for the scope of the assignment? If so, can you modify it so it is more manageable? You will ask these questions during this preliminary phase of the research process.

Identifying Potential Topics

Sometimes, your instructor may provide a list of suggested topics. If so, you may benefit from identifying several possibilities before committing to one idea. It is important to know how to narrow down your ideas into a concise, manageable thesis. You may also use the list as a starting point to help you identify additional, related topics. Discussing your ideas with your instructor will help ensure that you choose a manageable topic that fits the requirements of the assignment.

In this chapter, you will follow a writer named Jorge, who is studying health care administration, as he prepares a research paper. You will also plan, research, and draft your own research paper.

Jorge was assigned to write a research paper on health and the media for an introductory course in health care. Although a general topic was selected for the students, Jorge had to decide which specific issues interested him. He brainstormed a list of possibilities.

If you are writing a research paper for a specialized course, look back through your notes and course activities. Identify reading assignments and class discussions that especially engaged you. Doing so can help you identify topics to pursue.

• Health Maintenance Organizations (HMOs) in the news
• Sexual education programs
• Hollywood and eating disorders
• Americans’ access to public health information
• Media portrayal of health care reform bill
• Depictions of drugs on television
• The effect of the Internet on mental health
• Popularized diets (such as low-carbohydrate diets)
• Fear of pandemics (bird flu, HINI, SARS)
• Electronic entertainment and obesity
• Advertisements for prescription drugs
• Public education and disease prevention

Set a timer for five minutes. Use brainstorming or idea mapping to create a list of topics you would be interested in researching for a paper about the influence of the Internet on social networking. Do you closely follow the media coverage of a particular website, such as Twitter? Would you like to learn more about a certain industry, such as online dating? Which social networking sites do you and your friends use? List as many ideas related to this topic as you can.

Narrowing Your Topic

Once you have a list of potential topics, you will need to choose one as the focus of your essay. You will also need to narrow your topic. Most writers find that the topics they listed during brainstorming or idea mapping are broad—too broad for the scope of the assignment. Working with an overly broad topic, such as sexual education programs or popularized diets, can be frustrating and overwhelming. Each topic has so many facets that it would be impossible to cover them all in a college research paper. However, more specific choices, such as the pros and cons of sexual education in kids’ television programs or the physical effects of the South Beach diet, are specific enough to write about without being too narrow to sustain an entire research paper.

A good research paper provides focused, in-depth information and analysis. If your topic is too broad, you will find it difficult to do more than skim the surface when you research it and write about it. Narrowing your focus is essential to making your topic manageable. To narrow your focus, explore your topic in writing, conduct preliminary research, and discuss both the topic and the research with others.

Exploring Your Topic in Writing

“How am I supposed to narrow my topic when I haven’t even begun researching yet?” In fact, you may already know more than you realize. Review your list and identify your top two or three topics. Set aside some time to explore each one through freewriting. (For more information about freewriting, see Chapter 8 “The Writing Process: How Do I Begin?” .) Simply taking the time to focus on your topic may yield fresh angles.

Jorge knew that he was especially interested in the topic of diet fads, but he also knew that it was much too broad for his assignment. He used freewriting to explore his thoughts so he could narrow his topic. Read Jorge’s ideas.

Conducting Preliminary Research

Another way writers may focus a topic is to conduct preliminary research . Like freewriting, exploratory reading can help you identify interesting angles. Surfing the web and browsing through newspaper and magazine articles are good ways to start. Find out what people are saying about your topic on blogs and online discussion groups. Discussing your topic with others can also inspire you. Talk about your ideas with your classmates, your friends, or your instructor.

Jorge’s freewriting exercise helped him realize that the assigned topic of health and the media intersected with a few of his interests—diet, nutrition, and obesity. Preliminary online research and discussions with his classmates strengthened his impression that many people are confused or misled by media coverage of these subjects.

Jorge decided to focus his paper on a topic that had garnered a great deal of media attention—low-carbohydrate diets. He wanted to find out whether low-carbohydrate diets were as effective as their proponents claimed.

Writing at Work

At work, you may need to research a topic quickly to find general information. This information can be useful in understanding trends in a given industry or generating competition. For example, a company may research a competitor’s prices and use the information when pricing their own product. You may find it useful to skim a variety of reliable sources and take notes on your findings.

The reliability of online sources varies greatly. In this exploratory phase of your research, you do not need to evaluate sources as closely as you will later. However, use common sense as you refine your paper topic. If you read a fascinating blog comment that gives you a new idea for your paper, be sure to check out other, more reliable sources as well to make sure the idea is worth pursuing.

Review the list of topics you created in Note 11.18 “Exercise 1” and identify two or three topics you would like to explore further. For each of these topics, spend five to ten minutes writing about the topic without stopping. Then review your writing to identify possible areas of focus.

Set aside time to conduct preliminary research about your potential topics. Then choose a topic to pursue for your research paper.

Collaboration

Please share your topic list with a classmate. Select one or two topics on his or her list that you would like to learn more about and return it to him or her. Discuss why you found the topics interesting, and learn which of your topics your classmate selected and why.

A Plan for Research

Your freewriting and preliminary research have helped you choose a focused, manageable topic for your research paper. To work with your topic successfully, you will need to determine what exactly you want to learn about it—and later, what you want to say about it. Before you begin conducting in-depth research, you will further define your focus by developing a research question , a working thesis, and a research proposal.

Formulating a Research Question

In forming a research question, you are setting a goal for your research. Your main research question should be substantial enough to form the guiding principle of your paper—but focused enough to guide your research. A strong research question requires you not only to find information but also to put together different pieces of information, interpret and analyze them, and figure out what you think. As you consider potential research questions, ask yourself whether they would be too hard or too easy to answer.

To determine your research question, review the freewriting you completed earlier. Skim through books, articles, and websites and list the questions you have. (You may wish to use the 5WH strategy to help you formulate questions. See Chapter 8 “The Writing Process: How Do I Begin?” for more information about 5WH questions.) Include simple, factual questions and more complex questions that would require analysis and interpretation. Determine your main question—the primary focus of your paper—and several subquestions that you will need to research to answer your main question.

Here are the research questions Jorge will use to focus his research. Notice that his main research question has no obvious, straightforward answer. Jorge will need to research his subquestions, which address narrower topics, to answer his main question.

Using the topic you selected in Note 11.24 “Exercise 2” , write your main research question and at least four to five subquestions. Check that your main research question is appropriately complex for your assignment.

Constructing a Working ThesIs

A working thesis concisely states a writer’s initial answer to the main research question. It does not merely state a fact or present a subjective opinion. Instead, it expresses a debatable idea or claim that you hope to prove through additional research. Your working thesis is called a working thesis for a reason—it is subject to change. As you learn more about your topic, you may change your thinking in light of your research findings. Let your working thesis serve as a guide to your research, but do not be afraid to modify it based on what you learn.

Jorge began his research with a strong point of view based on his preliminary writing and research. Read his working thesis statement, which presents the point he will argue. Notice how it states Jorge’s tentative answer to his research question.

One way to determine your working thesis is to consider how you would complete sentences such as I believe or My opinion is . However, keep in mind that academic writing generally does not use first-person pronouns. These statements are useful starting points, but formal research papers use an objective voice.

Write a working thesis statement that presents your preliminary answer to the research question you wrote in Note 11.27 “Exercise 3” . Check that your working thesis statement presents an idea or claim that could be supported or refuted by evidence from research.

Creating a Research Proposal

A research proposal is a brief document—no more than one typed page—that summarizes the preliminary work you have completed. Your purpose in writing it is to formalize your plan for research and present it to your instructor for feedback. In your research proposal, you will present your main research question, related subquestions, and working thesis. You will also briefly discuss the value of researching this topic and indicate how you plan to gather information.

When Jorge began drafting his research proposal, he realized that he had already created most of the pieces he needed. However, he knew he also had to explain how his research would be relevant to other future health care professionals. In addition, he wanted to form a general plan for doing the research and identifying potentially useful sources. Read Jorge’s research proposal.

Before you begin a new project at work, you may have to develop a project summary document that states the purpose of the project, explains why it would be a wise use of company resources, and briefly outlines the steps involved in completing the project. This type of document is similar to a research proposal. Both documents define and limit a project, explain its value, discuss how to proceed, and identify what resources you will use.

Writing Your Own Research Proposal

Now you may write your own research proposal, if you have not done so already. Follow the guidelines provided in this lesson.

Key Takeaways

• Developing a research proposal involves the following preliminary steps: identifying potential ideas, choosing ideas to explore further, choosing and narrowing a topic, formulating a research question, and developing a working thesis.
• A good topic for a research paper interests the writer and fulfills the requirements of the assignment.
• Defining and narrowing a topic helps writers conduct focused, in-depth research.
• Writers conduct preliminary research to identify possible topics and research questions and to develop a working thesis.
• A good research question interests readers, is neither too broad nor too narrow, and has no obvious answer.
• A good working thesis expresses a debatable idea or claim that can be supported with evidence from research.
• Writers create a research proposal to present their topic, main research question, subquestions, and working thesis to an instructor for approval or feedback.

Writing for Success Copyright © 2015 by University of Minnesota is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

• Skip to main content
• Skip to ChatBot Assistant
• Academic Writing
• What is a Research Paper?

Steps in Writing a Research Paper

• Critical Reading and Writing
• Punctuation
• Writing Exercises
• ELL/ESL Resources

A series of steps, starting with developing a research question and working thesis, will lead you through writing a research paper. As you move through these steps and actually create the research paper, you may find that you can't move through all of them in chronological order, and that's o.k. In fact, you may change the order of the steps depending on the subject, your knowledge of the subject, and your sources. For example, sometimes you need to do just a bit of background research and reading before you can develop a research question. Sometimes you need to go back and find additional sources to corroborate your viewpoint. The research writing steps that we offer represent a general, ideal, movement through the research writing process. In reality, writers often repeat or circle back as needed.

Hey, wait a minute . . . why did we say "ideal?" In our opinion, these steps represent the best way to move through the writing process because they ask you to think and develop a research question before you actually do a lot of research. The one big mess that you can get into, as a student, comes from doing too much unfocused research before identifying your own viewpoint, the one that you will eventually need to support. If you do too much unfocused research first, then the tendency is to try to include all of it in the paper. The result is a hodgepodge of information that's not focused, developed fully, or indicative of your own thoughts. It's also not efficient to do too much research before you really know what you're looking for. Try it our way--develop that research question first--to cut out a lot of research paper mess.

These steps will lead you through writing a research paper:

• One Big Mess...
• Developing a Research Question
• Thesis Characteristics
• Finding Sources
• Evaluating Sources
• Taking Notes
• Working with Quotations
• Writing Summaries & Paraphrases
• Building the Essay Draft
• Documentation Formats
• Revising and Proofreading the Draft

Need Assistance?

If you would like assistance with any type of writing assignment, learning coaches are available to assist you. Please contact Academic Support by emailing [email protected].

Questions or feedback about SUNY Empire's Writing Support?

Contact us at [email protected] .

Smart Cookies

They're not just in our classes – they help power our website. Cookies and similar tools allow us to better understand the experience of our visitors. By continuing to use this website, you consent to SUNY Empire State University's usage of cookies and similar technologies in accordance with the university's Privacy Notice and Cookies Policy .

• Book Lists by Age
• Book Lists by Category
• Reading Resources
• Language & Speech
• Raise a Reader Blog
• Back to School
• Success Guides by Grade
• Homework Help
• Social & Emotional Learning
• Activities for Kids

7 Steps to a Successful Research Report

Help your child produce his best work yet with this simple process..

If your child's about to tackle a big project, she can follow these simple steps to stay on track.

• Choose a topic.  It should be a subject he can understand and one that interests him.
• Make a plan.  Create a calendar together to map out the process.
• Check with the teacher.  She should double-check the topic with her teacher.
• Conduct research and take notes.  He can use a range of resources — from books, periodicals, and the Internet — to do this. Help him practice taking notes without copying word-for-word to reduce the risk of plagiarism.
• Outline the project.  This will help her organize her notes and thoughts.
• Write the report.  Use the outline as a road map.
• Edit and reread the report.  Checking and correcting mistakes are the hallmarks of a good student.

MBA Knowledge Base

Business • Management • Technology

Home » Research Methodology » Preparing a Research Report

Preparing a Research Report

The research report is considered as a major component of the research work, because through this report the research problem , the research design , the analysis and findings are brought to the knowledge of the world. The research report converts the research work into a public asset from its earlier state of private asset.

The research report shows the readers the progress in knowledge made in the specific area or discipline. The report by bringing to light the new frontiers of knowledge enhances the society’s intellectual well-being. The report by highlighting the design and methodology, runs as a fore-runner for future researchers in this or related area. The analyses and interpretations may give a boost to knowledge. The findings and suggestions take the readers into enlightenment from ignorance. Every research must endeavor to achieve this.

The role of a research report is best known in the absence of the same – Assume for a while, that no researcher gives out his research work in the form of a report. Then the research work is just like a lamp in the pot. When, it takes the form of report it is like a lamp on the hillock illuminating the surroundings. If a research report is not made, even the researcher may not be able tell his work at a future date. Thanks to human’s potentials to forget. Such waste of efforts should never occur. If only a research report was made out, re-inventing the wheel would not take place otherwise, same problem may be analyzed by different people at different places or in the same place at different times or at the same time. This is a greater waste of human energy. Thus a research report conserves energy that would otherwise would have been spent uselessly.

Contents of Research Report

A research report generally contains three aspects:

• Preliminary Section,
• Main Body and
• Reference Section.

1. Preliminary Section

The preliminary section deals with title, acknowledgement, etc.

• Title Page : The title of the research report usually bears the investigator’s name, a statement as to the course for which the study has been required, the date of submission, and the name of the institution making that requirement. In reports of studies not undertaken for any course, the investigator’s name, the institution he belongs to and the date of completion of the work is indicated. In a published thesis the latter information is substituted or supplemented by the name of the publishers and the date and place of publication.
• Acknowledgement Page : The acknowledgement page is largely one of courtesy in which the investigator acknowledges the guidance and assistance he has received in the development of the study. Acknowledgement may not refer to the guide so much as to others who may have aided in a special way. It is rightly said that good taste calls for acknowledgements to be expressed simply and tactfully.
• Preface or Foreword : Sometimes a preface or foreword of one or two pages long, follows the acknowledgement page, bearing some initial remarks and perhaps a brief statement of the scope, aim and general character of the research.
• Table of Contents : A well-developed table of contents renders a good deal of assistance to a reader in choosing rapidly and judiciously what he should, subsequently, read carefully. It is usually desirable to include in it not only the chapter headings, but also the headings of the major subdivisions of the chapters. Sometimes the topics within the subdivisions are also included and are found enlightening by the readers.
• Lists of Tables and Figures : Another device used to supplement the table of contents for throwing more light on the subject of the thesis is that of giving lists of tables and figures which occur in the report.

2. Main Body of the Report

The main body of the research report contains all the material aspect of the research work.

• Introduction : The first part of the main body of the report, the Introduction, usually includes a statement of the factors leading up to the choice of the problem, the purposes of the study, the value and significance attached to the problem by the investigator as a contribution to knowledge and any other information to express the sincerity of the investigator in his selection. A statement and elucidation of the problem sometimes forms a part of the introduction; but more often/it is set up as a separate unit. If this is stated in a clear-cut and logical manner, the reader is able to get a sufficiently clear insight into the study from the very beginning. The problem should be defined in detail. The exact area the investigation is supposed to cover must be well demarcated. The sources of information selected and their nature and delimitation’s should be mentioned and justified. All terms of a technical nature or those which may seem vague to the lay reader need to be defined carefully. The objectives, limitations, hypotheses , etc. are given. The methodology and design of the study are also given in introduction. To explain the developmental process used for the sturdy the investigator has to describe the techniques and tools he has used for collecting, organizing, analyzing and interpreting his data . The sources of data tapped, the channels prepared or adapted and utilized, the nature of data collected, their validity and reliability – all these should be given in a clear and adequate manner. Data collected, but rejected and the methods tried but not pursued – these should also find their place in the report and should not be just left out of the picture.
• Survey of Related Literature : Any research worker has to be up-to-date in his information about studies, related to his own problem, already made by others. References are made to such similar or related studies and their evaluation too is made for the benefit of the reader either in the Introductory chapter, or else in a separate chapter. Herein the author finds another opportunity to justify his own endeavor and to emphasize the worthwhile elements in the treatment, selected by him, of the problem. Read More: The Literature Review in Research
• Analysis and Interpretation ;The analysis and interpretation section deals with the main works undertaken. Each objective of the research work, each hypothesis, each research question posed and such other major constituents of the research work are thoroughly probed, analysed using the statistical data collected applying appropriate tools of analysis and interpretations are made in the light of the analysis made . Unusual or complex techniques of collection, organization, analysis and interpretation are explained in full. Whether the original data themselves should be included in the text or given in the appendix depends on the nature of the data. If they are not too extensive and are necessary to clarify the discussion, they should certainly find a place in the text proper, or in the footnotes. If they are extensive and cumbersome, they should be placed in the appendix. Of the various aids used to make the presentation of data more effective, tables and figures are most common. When statistical data are assembled according to certain common factors in the form of tables, significant relationships show up clearly. Depending on the type of material at one’s disposal, many kinds of figures are found useful, e.g., statistical diagrams, photographs and maps, etc. All the information described above is sometimes confined to one chapter with separate subdivisions arranged stage-wise. Otherwise, separate chapters are devoted each major functional area or objective studied. The arrangement depends on the quantity of information one has to convey to the reader regarding the different stages in the process of the development of the study.
• Conclusion : The final unit of the report usually contains the findings of the study, the conclusions the investigator has arrived at, and the generalization he has formulated on the basis of the study. In stating the conclusions, the investigator must indicate what his contribution has been to his field of study. He should indicate on what data his various conclusions are based. He should clearly demarcate between the inevitable conclusions and his own interpretation of certain data. The range of applicability of the conclusions should be indicated on the basis of the limitations of the sources, the sample, the tools of collection and analysis, etc. Negative as well as positive results should find a place in the conclusions. Any recommendations, as to the application of the findings, the investigator wishes to make, can find a place in this chapter. Recommendations or suggestions for further study in the field touched by the present research are also found useful and are usually included in the concluding chapter.

3. Referencing Section of the Report

• Bibliography : The ‘works cited’ form of bibliography is preferable over the ‘sources consulted’. Every book, thesis, article, documents which has been cited should be included in the list of ‘works cited’. The bibliography should follow a logical arrangement in alphabetical order. In report of current practice is to have one comprehensive listing-not to divide into books, journals, newspapers, official papers, documents and manuscripts. The author(s) name, the title of the work, date of publication, name of the publisher and the place of publication be mentioned. For articles, the volume number and inclusive pages be also given, the author’s initials or surname should follow the name. When there are three or more authors of a particular work, the co-authors may be referred alphabetically If there by more than one work by the same author, the author’s name should be listed only once; subsequently a line will substitute his name. This bibliographical listing should not be numbered. It should be given only at the end of the thesis,
• Appendix : The appendix section gives a copy of the tools of research used, certain sample statistical workings, articles published by the researcher, etc. Each class of material given may be numbered as Appendix I, Appendix II and so on. It is saner to give the appendices in the same order in which the relevant items are used.
• Index : Index is a very important component which facilitates easy location of a concept or entity mentioned in the main body of the work. Here alphabetical order is followed. Page number is given to easy location. Author Index, Subject Index and Sponsor Index are certain indices used. All the three may be separately given and merged into one single class of ‘index’.

Principles of Good Research Report Writing

Following are some important principles for writing a good research report :

• Make small sentences: Reading begins to get strenuous when sentences used in the research report average more than 25 words.
• Vary sentence length: In using short sentences do not let the work become choppy. Sentences of considerable length are all right provided. Better they are balanced with enough short sentences.
• Use simple words: The researcher is advised to use simple words in his research report.
• Use familiar words: It is better to use familiar words in a research report.
• Avoid unnecessary words: The use of unnecessary words tire a reader and fog up the writing.
• Write to express not to impress: The best way to impress the reader of report is to express what you have to say clearly and directly.
• Write as you talk: The researcher should make his report writing as though it is his speech.
• Keep as many active verbs as possible: Use of active verbs puts life into report writing.
• Tie in with reader’s experience: Always write research reports with a particular reader in mind. Relate what you have to tell him about your research report. This is the way to have the reader understand your report.
• Make the report short and sweet: A short report makes reading interest and sweet. Short report should not mean short-cut report.

Related posts:

• Referencing a Research Report
• Steps Involved in Drafting a Research Report
• Writing the Research Report
• Contents and Layout of Research Report
• Accounting Concepts for Preparing Financial Statements
• Interpretation of Research Data
• Tips for Effective Research Interviews
• Inductive and Deductive Research Approach
• Simple Random Sampling in Research
• Methods of Data Processing in Research

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Campus Career Club

Follow What Your Heart Says

Research Report Writing Steps with Format

Research report writing in effect regardless of the nature of your research study not only organizes your thoughts and research work but also serves as the template for the entire research process. Actually, the research report writing steps & format acts as a visual reminder so that you can include every detail of your research work. If you are a beginner in research report writing, then it is essential in order to write rightly your invaluable research paper.

Research Report Writing

The purpose of the research report writing is to deliver the results of the research to the interested person as far as possible and publish it in a coherent way so that the reader understands the information. Thus, the reader can determine the rationale of the  research study itself. So, while you write down your own research report keep in mind the following factors well. Though, there is no fixed structure or rule for writing a research report.

(A) The report will agree realistically. Its report would be real based on the data obtained in the study.

(B) It will be complete. The researcher should be aware that all the things are included as per the purpose of the research study.

(C) It will be as short as possible. This does not mean that it is necessary to summarize without discussing the necessary issues. In fact, it is big enough to discuss essential issues in detail but short for unnecessary subject matters.

(D) The language of the report would be so clear and understandable. The report should use words that take into account the reader’s interest in reading the report.

(E) The researcher would be intellectually honest.

(F) The report will be readable so that the reader feels interested in reading it.

Research Report Writing Steps

The researcher would write the research report is a step-by-step process. The essential steps in research report writing might be as follows:

Step-1: Organizing the Research Report

Thinking about how the data collected for the study will be structured. Research problems can have different sides. Information can be of different types. All this information should be arranged in a systematic and consistent manner in the light of research questions and assumptions.

Develop an outline for organizing your ideas using the information collected. on note cards. An outline shows your core ideas and what you are about to write about them. Write down all the key concepts. List the subordinate ideas below the core concepts. Avoid repeating any concepts

Step-2: Preparing an Outline

The other important thing about writing a report is to create an outline that gives you an overall outlook on the topic of the study. Adjust the order of the items to be included in the report. Then, understand the title, the most important issues, and its overview. Basically, your outline will form in three main categories: introduction, body, and conclusion. But to make sure your paper is complete, consult with your instructor for the specific outline you want to include in your research. A sample outline for the research paper you might follow. But first, let’s point out the main sections of your paper and what information each should cover.

Step-3: Writing a Draft Report

After creating the report outline, the researcher will start writing the report based on the information received according to that outline. But first, make a draft report. Then, examine the draft report, find out mistakes, edit and make changes. This not only clears things up from the get-go but also regulates the process of writing a research paper. This helps to establish the basic structure of your paper. Prepare a first draft where you examine your outline and expand on ideas to support your thesis.

Step-4: Report Writing as per Objectives

The researcher needs to be very aware of the purpose of the study from the beginning of the report preparation. Writing reports according to the purpose of research reduces the opportunity for discussion of irrelevant issues of course. The goal of the research is your purpose, which is why you are doing research and the signals where you expect the end to come. Objectives are precise steps that you will take to get there. So when you write a report, your purpose should be kept in mind.

Research Report Writing Format

A research report has three basic parts.

Firstly, primary things, for example-research title, introduction, acknowledgments, & table of contents, etc.

Secondly, the main part, the research discussion, or research findings. The main part will necessarily be divided into some chapters.

Then, relevant issues, for example-annexure, bibliography, etc.

An Ideal Research Report Sample

You might also like

How to choose a research design, ideas on how to develop writing skills in students, 5 basic steps in formulation of hypothesis in research, leave a reply cancel reply.

Your email address will not be published. Required fields are marked *

How to Write a Research Proposal: (with Examples & Templates)

Table of Contents

Before conducting a study, a research proposal should be created that outlines researchers’ plans and methodology and is submitted to the concerned evaluating organization or person. Creating a research proposal is an important step to ensure that researchers are on track and are moving forward as intended. A research proposal can be defined as a detailed plan or blueprint for the proposed research that you intend to undertake. It provides readers with a snapshot of your project by describing what you will investigate, why it is needed, and how you will conduct the research.  

Your research proposal should aim to explain to the readers why your research is relevant and original, that you understand the context and current scenario in the field, have the appropriate resources to conduct the research, and that the research is feasible given the usual constraints.  

This article will describe in detail the purpose and typical structure of a research proposal , along with examples and templates to help you ace this step in your research journey.  

What is a Research Proposal ?  

A research proposal¹ ,²  can be defined as a formal report that describes your proposed research, its objectives, methodology, implications, and other important details. Research proposals are the framework of your research and are used to obtain approvals or grants to conduct the study from various committees or organizations. Consequently, research proposals should convince readers of your study’s credibility, accuracy, achievability, practicality, and reproducibility.   

With research proposals , researchers usually aim to persuade the readers, funding agencies, educational institutions, and supervisors to approve the proposal. To achieve this, the report should be well structured with the objectives written in clear, understandable language devoid of jargon. A well-organized research proposal conveys to the readers or evaluators that the writer has thought out the research plan meticulously and has the resources to ensure timely completion.  

Purpose of Research Proposals  

A research proposal is a sales pitch and therefore should be detailed enough to convince your readers, who could be supervisors, ethics committees, universities, etc., that what you’re proposing has merit and is feasible . Research proposals can help students discuss their dissertation with their faculty or fulfill course requirements and also help researchers obtain funding. A well-structured proposal instills confidence among readers about your ability to conduct and complete the study as proposed.  

Research proposals can be written for several reasons:³  

• To describe the importance of research in the specific topic  
• Address any potential challenges you may encounter  
• Showcase knowledge in the field and your ability to conduct a study  
• Apply for a role at a research institute  
• Convince a research supervisor or university that your research can satisfy the requirements of a degree program  
• Highlight the importance of your research to organizations that may sponsor your project  
• Identify implications of your project and how it can benefit the audience  

What Goes in a Research Proposal?    

Research proposals should aim to answer the three basic questions—what, why, and how.  

The What question should be answered by describing the specific subject being researched. It should typically include the objectives, the cohort details, and the location or setting.  

The Why question should be answered by describing the existing scenario of the subject, listing unanswered questions, identifying gaps in the existing research, and describing how your study can address these gaps, along with the implications and significance.  

The How question should be answered by describing the proposed research methodology, data analysis tools expected to be used, and other details to describe your proposed methodology.   

Research Proposal Example  

Here is a research proposal sample template (with examples) from the University of Rochester Medical Center. 4 The sections in all research proposals are essentially the same although different terminology and other specific sections may be used depending on the subject.  

Structure of a Research Proposal  

If you want to know how to make a research proposal impactful, include the following components:¹  

1. Introduction  

This section provides a background of the study, including the research topic, what is already known about it and the gaps, and the significance of the proposed research.  

2. Literature review  

This section contains descriptions of all the previous relevant studies pertaining to the research topic. Every study cited should be described in a few sentences, starting with the general studies to the more specific ones. This section builds on the understanding gained by readers in the Introduction section and supports it by citing relevant prior literature, indicating to readers that you have thoroughly researched your subject.  

3. Objectives  

Once the background and gaps in the research topic have been established, authors must now state the aims of the research clearly. Hypotheses should be mentioned here. This section further helps readers understand what your study’s specific goals are.  

4. Research design and methodology  

Here, authors should clearly describe the methods they intend to use to achieve their proposed objectives. Important components of this section include the population and sample size, data collection and analysis methods and duration, statistical analysis software, measures to avoid bias (randomization, blinding), etc.  

5. Ethical considerations  

This refers to the protection of participants’ rights, such as the right to privacy, right to confidentiality, etc. Researchers need to obtain informed consent and institutional review approval by the required authorities and mention this clearly for transparency.  

6. Budget/funding  

Researchers should prepare their budget and include all expected expenditures. An additional allowance for contingencies such as delays should also be factored in.  

7. Appendices  

This section typically includes information that supports the research proposal and may include informed consent forms, questionnaires, participant information, measurement tools, etc.  

8. Citations  

Important Tips for Writing a Research Proposal  

Writing a research proposal begins much before the actual task of writing. Planning the research proposal structure and content is an important stage, which if done efficiently, can help you seamlessly transition into the writing stage. 3,5  

The Planning Stage  

• Manage your time efficiently. Plan to have the draft version ready at least two weeks before your deadline and the final version at least two to three days before the deadline.
• What is the primary objective of your research?  
• Will your research address any existing gap?  
• What is the impact of your proposed research?  
• Do people outside your field find your research applicable in other areas?  
• If your research is unsuccessful, would there still be other useful research outcomes?  

  The Writing Stage  

• Create an outline with main section headings that are typically used.  
• Focus only on writing and getting your points across without worrying about the format of the research proposal , grammar, punctuation, etc. These can be fixed during the subsequent passes. Add details to each section heading you created in the beginning.   
• Ensure your sentences are concise and use plain language. A research proposal usually contains about 2,000 to 4,000 words or four to seven pages.  
• Don’t use too many technical terms and abbreviations assuming that the readers would know them. Define the abbreviations and technical terms.  
• Ensure that the entire content is readable. Avoid using long paragraphs because they affect the continuity in reading. Break them into shorter paragraphs and introduce some white space for readability.  
• Focus on only the major research issues and cite sources accordingly. Don’t include generic information or their sources in the literature review.  
• Proofread your final document to ensure there are no grammatical errors so readers can enjoy a seamless, uninterrupted read.  
• Use academic, scholarly language because it brings formality into a document.  
• Ensure that your title is created using the keywords in the document and is neither too long and specific nor too short and general.  
• Cite all sources appropriately to avoid plagiarism.  
• Make sure that you follow guidelines, if provided. This includes rules as simple as using a specific font or a hyphen or en dash between numerical ranges.  
• Ensure that you’ve answered all questions requested by the evaluating authority.  

Key Takeaways   

Here’s a summary of the main points about research proposals discussed in the previous sections:  

• A research proposal is a document that outlines the details of a proposed study and is created by researchers to submit to evaluators who could be research institutions, universities, faculty, etc.  
• Research proposals are usually about 2,000-4,000 words long, but this depends on the evaluating authority’s guidelines.  
• A good research proposal ensures that you’ve done your background research and assessed the feasibility of the research.  
• Research proposals have the following main sections—introduction, literature review, objectives, methodology, ethical considerations, and budget.  

Frequently Asked Questions  

Q1. How is a research proposal evaluated?  

A1. In general, most evaluators, including universities, broadly use the following criteria to evaluate research proposals . 6  

• Significance —Does the research address any important subject or issue, which may or may not be specific to the evaluator or university?  
• Content and design —Is the proposed methodology appropriate to answer the research question? Are the objectives clear and well aligned with the proposed methodology?  
• Sample size and selection —Is the target population or cohort size clearly mentioned? Is the sampling process used to select participants randomized, appropriate, and free of bias?  
• Timing —Are the proposed data collection dates mentioned clearly? Is the project feasible given the specified resources and timeline?  
• Data management and dissemination —Who will have access to the data? What is the plan for data analysis?  

Q2. What is the difference between the Introduction and Literature Review sections in a research proposal ?  

A2. The Introduction or Background section in a research proposal sets the context of the study by describing the current scenario of the subject and identifying the gaps and need for the research. A Literature Review, on the other hand, provides references to all prior relevant literature to help corroborate the gaps identified and the research need.  

Q3. How long should a research proposal be?  

A3. Research proposal lengths vary with the evaluating authority like universities or committees and also the subject. Here’s a table that lists the typical research proposal lengths for a few universities.  

Q4. What are the common mistakes to avoid in a research proposal ?  

A4. Here are a few common mistakes that you must avoid while writing a research proposal . 7  

• No clear objectives: Objectives should be clear, specific, and measurable for the easy understanding among readers.  
• Incomplete or unconvincing background research: Background research usually includes a review of the current scenario of the particular industry and also a review of the previous literature on the subject. This helps readers understand your reasons for undertaking this research because you identified gaps in the existing research.  
• Overlooking project feasibility: The project scope and estimates should be realistic considering the resources and time available.   
• Neglecting the impact and significance of the study: In a research proposal , readers and evaluators look for the implications or significance of your research and how it contributes to the existing research. This information should always be included.  
• Unstructured format of a research proposal : A well-structured document gives confidence to evaluators that you have read the guidelines carefully and are well organized in your approach, consequently affirming that you will be able to undertake the research as mentioned in your proposal.  
• Ineffective writing style: The language used should be formal and grammatically correct. If required, editors could be consulted, including AI-based tools such as Paperpal , to refine the research proposal structure and language.  

Thus, a research proposal is an essential document that can help you promote your research and secure funds and grants for conducting your research. Consequently, it should be well written in clear language and include all essential details to convince the evaluators of your ability to conduct the research as proposed.  

This article has described all the important components of a research proposal and has also provided tips to improve your writing style. We hope all these tips will help you write a well-structured research proposal to ensure receipt of grants or any other purpose.  

References  

• Sudheesh K, Duggappa DR, Nethra SS. How to write a research proposal? Indian J Anaesth. 2016;60(9):631-634. Accessed July 15, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5037942/  
• Writing research proposals. Harvard College Office of Undergraduate Research and Fellowships. Harvard University. Accessed July 14, 2024. https://uraf.harvard.edu/apply-opportunities/app-components/essays/research-proposals  
• What is a research proposal? Plus how to write one. Indeed website. Accessed July 17, 2024. https://www.indeed.com/career-advice/career-development/research-proposal  
• Research proposal template. University of Rochester Medical Center. Accessed July 16, 2024. https://www.urmc.rochester.edu/MediaLibraries/URMCMedia/pediatrics/research/documents/Research-proposal-Template.pdf  
• Tips for successful proposal writing. Johns Hopkins University. Accessed July 17, 2024. https://research.jhu.edu/wp-content/uploads/2018/09/Tips-for-Successful-Proposal-Writing.pdf  
• Formal review of research proposals. Cornell University. Accessed July 18, 2024. https://irp.dpb.cornell.edu/surveys/survey-assessment-review-group/research-proposals  
• 7 Mistakes you must avoid in your research proposal. Aveksana (via LinkedIn). Accessed July 17, 2024. https://www.linkedin.com/pulse/7-mistakes-you-must-avoid-your-research-proposal-aveksana-cmtwf/  

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

How to write a phd research proposal.

• What are the Benefits of Generative AI for Academic Writing?
• How to Avoid Plagiarism When Using Generative AI Tools
• What is Hedging in Academic Writing?  

How to Write Your Research Paper in APA Format

The future of academia: how ai tools are changing the way we do research, you may also like, dissertation printing and binding | types & comparison , what is a dissertation preface definition and examples , how to write your research paper in apa..., how to choose a dissertation topic, how to write an academic paragraph (step-by-step guide), maintaining academic integrity with paperpal’s generative ai writing..., research funding basics: what should a grant proposal..., how to write an abstract in research papers..., how to write dissertation acknowledgements.

Free Al Office Suite with PDF Editor

Edit Word, Excel, and PPT for FREE.

Read, edit, and convert PDFs with the powerful PDF toolkit.

Microsoft-like interface, easy to use.

Windows • MacOS • Linux • iOS • Android

• Articles of Word

How to Write A Report - A Guide to Report Format with Examples

A report is a major aspect of every academic's life, serving as a vital reflection of the depth and quality of your research. For those in research, the report is especially crucial, as it details the thoroughness of your work. Ensuring that your report is comprehensive and perfectly formatted is essential, particularly for university students, where it can define your greatest achievements. In this article, I will guide you on how to write a report properly, detailing everything you should include to ensure it meets high standards.

Types of Report Formats

Reports serve various purposes across different contexts, each tailored to meet specific needs and audiences. Here's a detailed breakdown of their classifications:

1.Academic Reports:

Academic reports are meticulously created by students or researchers to present findings on a specific topic. They typically include sections like an introduction, literature review, methodology, results, discussion, and conclusion. Examples include research papers, thesis reports, and lab reports.

2.Business Reports:

These reports facilitate communication within or between businesses, offering insights into market research, financial analysis, project progress, and more. Examples encompass financial reports, market analysis reports, and project status updates.

3.Scientific Reports:

Scientific reports are comprehensive documents that detail research and experiments, structured to ensure clarity and reproducibility. Examples range from research articles and clinical study reports to technical reports.

Classification of Reports:

1.Formal and Informal Reports:

Formal Reports: Structured and detailed, adhering to specific formats for official use. Examples include annual business reports.

Informal Reports: Less structured and straightforward, often used for internal updates like project status emails.

2.Short and Long Reports:

Short Reports: Concise documents providing essential information swiftly, such as executive summaries.

Long Reports: Detailed and extensive documents offering comprehensive insights, like in-depth research studies.

3.Internal and External Reports:

Internal Reports: Used within organizations to communicate among employees or departments, such as internal audit reports.

External Reports: Shared outside the organization with stakeholders or the public, such as annual financial statements.

4.Vertical and Lateral Reports:

Vertical Reports: Communicate vertically within organizational hierarchies, either upward (e.g., from employees to management) or downward (e.g., from management to employees). Examples include performance review reports.

Lateral Reports: Shared horizontally among peers or departments at the same hierarchical level within an organization, facilitating inter-departmental collaboration on projects.

Structure and Organization

When it comes to writing reports, the structure and organization can vary depending on the type of report you're creating. Let's explore some common report outlines to help you understand the differences and choose the right structure for your needs.

First, it's important to note that there's a basic outline that many reports follow, which typically includes:

Now, let's dive into specific types of reports and their unique structures:

Scientific Report

Scientific reports follow a specific structure designed to present research methods and findings clearly:

Book Report

Book reports, often assigned in school, have their own unique structure:

Business Report

Business reports are used to communicate information within an organization:

Newspaper or School Assignment Report

Newspaper articles and some school assignments follow a more concise structure:

These outlines provide a general guide, so it's best to always check your specific assignment requirements or organizational guidelines. The key is to choose a structure that best presents your information in a logical, easy-to-follow manner for your intended audience.

How to Write a Report Faster in 5 Steps- Using WPS AI

Learning how to write a report with the proper format and structure can be valuable in your academics. Not only will this help you with your assignments, but following a report structure can also make describing events or incidents with more clarity much easier in other situations.

Now, since we are just setting off on what report writing is, we will be taking help from WPS AI. It is a major resource for me whenever I start writing a report for an assignment, while writing my research papers, or even a simple class assignment. Its AI features make every task easier for me. With the help of AI, I can research better, get better ideas, and even improve my writing. So, let's begin learning how to write a report and also look at a few examples along the way.

1.Choose a topic

So, the first step in starting our report writing is selecting a topic for our research. Choosing the right topic is crucial for a successful report. It should align with your assignment requirements or your audience's expectations. Additionally, selecting a topic at the beginning gives us a clear direction—what to research and what keywords to use—making our research more focused and concise.

Now, this can be a bit challenging. Let's say our assignment requires us to write about battery-powered cars. This requirement is quite broad, and there are many different topics within battery-powered cars. The traditional approach would be to learn about the topic first, conduct a Google search, and read various articles to select a topic for our report. However, this process can be lengthy. Let's make it quicker by using WPS Office :

Step 1: Open WPS Office and create a new blank document by clicking on New > Docs > Blank.

Step 2: In WPS Writer's blank document, simply type "@ai" and then press Enter to activate the WPS AI assistant.

Step 3: Since we want topic ideas for our report, we'll click on "Brainstorm" and ask WPS AI to generate a few topic ideas for our report with a prompt. Here's an example:

"Generate ideas for a report topic focused on battery-powered cars, exploring recent advancements in electric vehicle technology and their environmental impact."

Step 4: WPS AI will generate a few topic ideas for your report. If you find a topic you like, click on "Accept". Otherwise, click on "Continue" to get more topic ideas.

Using WPS AI to generate topic ideas helps students quickly find their preferred topic and saves them the trouble of extensive research to choose a topic for their report. So, with the topic chosen, let's move on to the next step.

2.Conduct research

Once we have chosen the topic for our report, the next step is to conduct research. For this part, I usually visit Google Scholar to find research papers and other helpful articles. Students can also access exclusive research papers through their university's online libraries. Additionally, for specific topics like stocks, valuable resources include official stock exchange websites for authentic data.

Now, once the research papers and relevant information are gathered, going through these resources to extract information can take hours of reading time. To streamline this process, you can upload your research paper PDFs to WPS Office and get key insights in just a few moments.

Step 1: Open the PDF document using WPS Office and click on the WPS AI widget at the top right corner of the screen.

Step 2: The WPS AI pane will open on the right side of the screen. Simply click on "Upload" to upload the research paper to WPS AI.

Step 3: WPS AI will process the PDF, and in a few moments, it will present all the key insights available in the PDF.

Step 4: If you need further information from the PDF, simply click on the "Inquiry" tab and chat with the WPS AI chatbot to extract more details.

With this approach, conducting research becomes not only quicker but also more meaningful. After conducting research, I quickly move on to the next step, which is creating an outline for my report and starting the writing process.

3.Prepare an outline

Creating an outline before we begin writing our report is essential, as it helps our report follow a proper order and prevents confusion or getting lost while writing. If creating an outline seems challenging, you can always use WPS AI to assist in creating one. A simple AI prompt allows students to generate an effective and detailed outline for their report with the help of WPS AI.

So, let's say my topic is "Advancements in the Range and Charging Speeds of Electric Cars." Let's ask WPS AI to create a detailed outline for our report on this topic:

Step 1: First, type "@AI" to activate WPS AI and then click on "Outline" since we need help creating an outline.

Step 2: Enter an AI prompt to guide WPS AI in creating an outline for your topic. The more detailed your prompt, the better the outline will be.

Step 3: WPS AI will assist in generating an outline with a proper structure.

The outline generated with the help of WPS AI may or may not be the final version of your outline. You may need to make a few changes based on the content of your research. However, this outline will provide a basic structure that you can now modify according to your report's topic.

4.Write a Rough Draft

Now that you have a solid outline, it's time to start writing. Don't worry about perfection at this stage – the goal is to get your ideas down on paper.

Here's how WPS AI can assist in drafting:

Use the AI to expand on each section of your outline. For example, you could ask: "Write an Overview on the importance of advancements in the range and charging speeds of electric cars".

If you're stuck on a particular point, ask WPS AI for help. Try prompts like: "What are Lithium-ion batteries” or "List out the possible environmental benefits of Electric Cars".

Use WPS Office's formatting tools to structure your document. Apply heading styles to your outline points for easy navigation.

As you write, remember to maintain your own voice. Use the AI-generated content as a starting point, but add your own analysis, insights, and examples. This will ensure your report is original and reflects your understanding of the topic.

5.Revising and Editing your Report

At this point, you might feel like you're done with your report, but there's one last crucial step: proofreading. A mistake or two in typing or grammar can significantly diminish the professionalism of your report. It's essential to review your content, refining what needs to be included and removing anything irrelevant.

Here's how to use WPS AI for revising and editing:

Use the AI's grammar and spell-check features to catch basic errors.

We can use WPS AI to review specific paragraphs for clarity by selecting the "Improve Writing" option from the list of WPS AI options provided in the hover menu.

Here is what your report would look like at the end of this entire process:

Bonus Tips: How Can WPS AI Help your Report Writing [Not Only the Format]

WPS Office has contributed a lot to academic pursuits by providing a full-fledged office suite that aids everyone in their academic life. It gives access to advanced features that simplify report writing, eliminating frustrations related to conversions to PDF, formatting, checking, and more.

WPS Office offers multiple tools to help refine the report, including:

1. Content Generation and Refinement

WPS AI Writer: The AI-powered content generation tool in WPS Office assists users in creating well-structured and coherent content. Whether you're starting from scratch or need to enhance an existing draft, WPS AI can suggest improvements, generate additional content, and help organize your ideas effectively.

Templates: WPS Office provides a variety of templates for different types of reports, ensuring that you start with a professional format.

Smart Assistance: The AI can offer suggestions for better word choices, sentence structures, and even provide detailed outlines based on your topic.

2. Language and Style Enhancement

Grammar and Style Check: WPS Office includes advanced grammar and style checking tools that help you maintain a professional tone and clear language throughout your report.

Real-Time Feedback: Receive instant feedback on grammar, punctuation, and style issues as you type.

Customization: Adjust the settings to focus on specific style guides or preferences, ensuring that your report meets the required academic standards.

3. Proofreading and Editing

AI-Powered Proofreading: The built-in proofreading tool in WPS Office helps catch errors that you might miss. It goes beyond basic spell check to include context-aware suggestions.

Comprehensive Checks: This tool checks for consistency, coherence, and clarity, ensuring that your report is not only error-free but also easy to read and understand.

Batch Processing: Proofread and edit multiple documents simultaneously, saving time and ensuring consistency across all your reports.

FAQs About Writing a Report

1. what is a report.

A report is a written document that presents information about a particular topic, practical experiments, or research. Reports are usually well-structured, consisting of sections such as an executive summary, introduction, findings, discussion, conclusion, and recommendations. The main objective of a report is to describe and analyze the results, offering a clear understanding of the subject being addressed.

2. What is the difference between a report and an essay?

A report is a systematically organized document that presents information and analysis. Reports are used to detail the findings of a project, experiment, or investigation.It typically features specific sections with headings and subheadings and often incorporates tables, bullet points, and graphics. An essay, in contrast, has a more flexible structure with an introduction, body paragraphs, and a conclusion. Essays focus on developing a discussion or argument about a topic through a series of connected paragraphs. They are used to build and explore arguments and insights.

3. What are some common mistakes to avoid in report writing?

When writing a report, it is essential to avoid common pitfalls that can hinder clarity and effectiveness, such as:

Insufficient Organization: A well-defined structure is essential for clarity.

Excessive Detail: Too much information without context can confuse the reader.

Language Mistakes: Grammatical and spelling issues can diminish the report's credibility.

Audience Consideration: Not customizing content for the audience can reduce effectiveness.

Omitting Conclusions and Recommendations: Clear conclusions and actionable recommendations are crucial for impact.

Inappropriate Tense Usage: The report should be in the past tense.

Direct Speech Misuse: Use indirect speech.

Voice Misapplication: Passive voice should be utilized.

Perspective Issues: Reports must be composed in the third person.

Craft The Perfect Report WIth WPS Office

Reports can truly have a major part in shaping your ultimate future, so you want to make sure you have all the tools you need to know on how to write a report that allows you to submit it to perfection. WPS Office provides the resources and features necessary to help you achieve this goal. By using WPS Office, you equip yourself with all the necessary tools to write a perfectly formatted, professional report. Get WPS Office today to make your report writing better and ensure your reports contribute positively to shaping your future.

• 1. Guide on How to Write or Create Annual Report in Word 2022
• 2. How To Write On A Pdf Documents Without Changing Format
• 3. Step-by-step Guide to Using ChatGPT to Write a Report, Thesis and Dissertation
• 4. Guide on how to write or create daily report in Word 2022
• 5. Ultimate Guide to Write A Seminar PDF Report
• 6. Guide on how to write or create weekly report in Excel 2022

15 years of office industry experience, tech lover and copywriter. Follow me for product reviews, comparisons, and recommendations for new apps and software.

• SUGGESTED TOPICS
• The Magazine
• Newsletters
• Managing Yourself
• Managing Teams
• Work-life Balance
• The Big Idea
• Data & Visuals
• Reading Lists
• Case Selections
• HBR Learning
• Topic Feeds
• Account Settings
• Email Preferences

Embracing Gen AI at Work

• H. James Wilson
• Paul R. Daugherty

The skills you need to succeed in the era of large language models

Today artificial intelligence can be harnessed by nearly anyone, using commands in everyday language instead of code. Soon it will transform more than 40% of all work activity, according to the authors’ research. In this new era of collaboration between humans and machines, the ability to leverage AI effectively will be critical to your professional success.

This article describes the three kinds of “fusion skills” you need to get the best results from gen AI. Intelligent interrogation involves instructing large language models to perform in ways that generate better outcomes—by, say, breaking processes down into steps or visualizing multiple potential paths to a solution. Judgment integration is about incorporating expert and ethical human discernment to make AI’s output more trustworthy, reliable, and accurate. It entails augmenting a model’s training sources with authoritative knowledge bases when necessary, keeping biases out of prompts, ensuring the privacy of any data used by the models, and scrutinizing suspect output. With reciprocal apprenticing, you tailor gen AI to your company’s specific business context by including rich organizational data and know-how into the commands you give it. As you become better at doing that, you yourself learn how to train the AI to tackle more-sophisticated challenges.

The AI revolution is already here. Learning these three skills will prepare you to thrive in it.

Generative artificial intelligence is expected to radically transform all kinds of jobs over the next few years. No longer the exclusive purview of technologists, AI can now be put to work by nearly anyone, using commands in everyday language instead of code. According to our research, most business functions and more than 40% of all U.S. work activity can be augmented, automated, or reinvented with gen AI. The changes are expected to have the largest impact on the legal, banking, insurance, and capital-market sectors—followed by retail, travel, health, and energy.

• H. James Wilson is the global managing director of technology research and thought leadership at Accenture Research. He is the coauthor, with Paul R. Daugherty, of Human + Machine: Reimagining Work in the Age of AI, New and Expanded Edition (HBR Press, 2024). hjameswilson
• Paul R. Daugherty is Accenture’s chief technology and innovation officer. He is the coauthor, with H. James Wilson, of Human + Machine: Reimagining Work in the Age of AI, New and Expanded Edition (HBR Press, 2024). pauldaugh

Partner Center