Consent to assignment
![](http://writinghelp.online/777/templates/cheerup/res/banner1.gif)
Consent to assignment clause samples
3. FieldPoints Consent to Assignment. FieldPoint hereby consents to this assignment by Assignor to Assignee as provided in this Agreement. Such consent is expressly conditioned upon Assignees acknowledgment and agreement that neither this consent nor anything contained in this Agreement shall be deemed to modify, alter, amend, or waive any provisions of the Agreement.
04/11/2017 (FIELDPOINT PETROLEUM CORP)
2. Consent to Assignment. Notwithstanding any other provision of this Agreement, each party hereto hereby consents to the assignment, grant, pledge, conveyance and transfer by the other party hereto, for the benefit of any lender, agent or other secured party under any financing arrangement to which the Partnership is a party, of a lien, security interest or other encumbrance on and continuing security interest in all of such other partys estate, title and interest in its Interest and the exercise by each such secured party of its rights and remedies in connection therewith, including, without limitation, the right to exercise the voting and consensual rights and other powers with respect to such Interest and the right to foreclose upon, or exercise a power of sale with respect to, such Interest and to cause such secured party or any third party designee or purchaser of such Interest to become an additional or substitute partner in the Partnership.
06/15/2018 (Cheniere Energy Partners, L.P.)
1. Consent to Assignment. The undersigned hereby acknowledges and consents to the assignment of the Power Plant Equipment Lease to Buyer and the assumption of the Power Plant Equipment Lease by Buyer in conjunction with Buyers acquisition of the Hotel. The undersigned waives any and all rights of notice relating to such assignment and any right to terminate the Power Plant Equipment Lease as a result of such assignment and any default, event of default or defense to enforceability that may otherwise arise as a result of such assignment.
09/27/2016 (Playa Hotels & Resorts B.V.)
3. Consent to Assignment. Assignor hereby consents to the admittance of Assignee as a substitute member of the Company. Assignor hereby waives all provisions, if any, in the Limited Liability Company Agreement of the Company or provided in the Delaware Limited Liability Company Act or any other applicable law, that would prohibit, delay, require notice of, grant rights in connection with, or require compliance with any other requirements in connection with, such assignment and admission.
06/29/2018 (Berry Petroleum Corp)
3.Consent to Assignment. Citi consents to the assignment and assumption of the Agreement from Polaris India to Virtusa India , and with respect to Polaris India, the assignment and assumption of any Transactional Document executed by Polaris India to Virtusa India, and Citi acknowledges the rights, responsibilities, and authority of Virtusa India as though Virtusa India were the original party under the Agreement and Transactional Documents to which Polaris India was a party. Other than as set forth above, for the other Transactional Documents to which an Affiliate of Polaris India was a party, such Transactional Documents are not assigned but rather shall now reflect the changed name of such Affiliate per the table above.
07/31/2020 (VIRTUSA CORP)
![written consent to assignment of contract written consent to assignment of contract](https://afterpattern.com/assets/apex/showcase-formi9-3dbf42f0c8af48d9f9031a6a60a208486aafe808e06912a46eecb6c2908528ab.jpg)
Cut contract prep time in half for free
Build document automations that allow you, your staff, and your clients to auto-populate contract templates.
“ I've found it very easy to use. It allows me to work quickly, get something straight from my head and out into the public.”
![written consent to assignment of contract written consent to assignment of contract](https://afterpattern.com/assets/headshots/headshot-greg-9eb80c0c9c8f49655e7922c0608697dd8bd733e770e3a8609fbdfb5078aaf2b0.png)
Partner, Siskind Susser PC
2500 Executive Parkway Suite 300 Lehi, Utah 84043 (866) 638-3627
Level 11, 1 Margaret Street Sydney NSW 2000 Australia +61 2 8310 4319
8th Floor South Reading Bridge House George Street Reading RG1 8LS +44 20 3129 9324
Latin America
Mexico +52 55 5985 3005
Brazil +55 21 4040 4623
- How to Successfully Switch Your DMS
- DocuSign + NetDocuments
- How Ice Miller Adopted the Cloud Completely Remote
- Case Studies
- Resource Library
- Partner Integrations
- App Directory
- Locate a Partner
- Partner Portal
- Become a Partner
© NetDocuments Software, Inc.
- Terms of Use
- Privacy policy
- Cookie policy
- Privacy policy for california residents
Request for Consent to Assignment of Contract | Practical Law
![Thomson Reuters Practical Law Home written consent to assignment of contract](https://i1.next.westlaw.com/StaticContent_2408.1.1011/css/v2/images/practical-law-logo.png)
Request for Consent to Assignment of Contract
Practical law standard document 5-529-2265 (approx. 13 pages).
Maintained • USA (National/Federal) |
(404) 738-5471
![written consent to assignment of contract](https://motonlegalgroup.com/wp-content/uploads/2023/01/Moton-Legal-Group-Black-GoldTransparent-Background.webp)
Ultimate Checklist for Understanding Contract Assignment Rules
- February 28, 2024
- Moton Legal Group
![written consent to assignment of contract](https://motonlegalgroup.com/wp-content/uploads/2024/02/assignment-in-contract-law.jpg)
In contracts, understanding assignment is key. Simply put, an assignment in contract law is when one party (the assignor) transfers their rights and responsibilities under a contract to another party (the assignee). This can include anything from leasing agreements to business operations. But why is this important? It’s because it allows for flexibility in business and personal dealings, a critical component in our world.
Here’s a quick rundown: – Contract Basics: The foundational agreements between parties. – Assignment Importance: Allowing the transfer of obligations and benefits to keep up with life’s changes.
Contracts are a staple in both personal and business worlds, acting as the backbone to many transactions and agreements encountered daily. Understanding the nuances, like assignments, can empower you to navigate these waters with confidence and ease. Whether you’re a business owner in the Southeast looking to expand or an individual managing personal agreements, grasp these basics, and you’re on the right path.
![written consent to assignment of contract Detailed infographic on the concept of contract assignment in law, explaining the roles of the assignor and assignee, the process of an actual assignment, and a visual representation of the transfer of rights and obligations under a contract. - assignment in contract law infographic process-5-steps-informal](https://images.bannerbear.com/direct/4mGpW3zwpg0ZK0AxQw/requests/000/051/071/773/nyLXxdvaNQggPAkrQ9wePZm1E/8ffd1f014c72b718795301c8257881538ce6bbc2.jpg)
Understanding Contract Assignment
Contract Assignment sounds complicated, right? But, let’s break it down into simple terms. In contracts and legal agreements, knowing about assignment can save you a lot of headaches down the road. Whether you’re a business owner, a landlord, or just someone who deals with contracts, this is for you.
Legal Definition
At its core, contract assignment is about transferring rights or obligations under a contract from one party to another. Think of it as passing a baton in a relay race. The original party (the assignor) hands off their responsibilities or benefits to someone else (the assignee). But, there’s a twist – the race keeps going with the new runner without starting over.
Contract Law
In contract law, assignment comes into play in various ways. For example, if you’re a freelancer and you’ve agreed to complete a project but suddenly find yourself overbooked, you might assign that contract to another freelancer. This way, the job gets done, and your client is happy. However, not all contracts can be freely assigned. Some require the other party’s consent, and others can’t be assigned at all, especially if they involve personal skills or confidential trust.
Property Law
When it comes to property law, assignment often surfaces in landlord-tenant relationships. Say you’re renting a shop for your business, but you decide to move. If your lease allows it, you might assign your lease to another business. This means they take over your lease, stepping into your shoes, with all the rights and obligations that come with it.
The concept might seem straightforward, but there are important legal requirements and potential pitfalls to be aware of. For instance, an assignment could be prohibited by the contract itself, or it may significantly change the original deal’s terms in a way that’s not allowed. Plus, when you’re dealing with something that requires a unique skill set, like an artist or a consultant, those services typically can’t be passed on to someone else without agreement from all parties involved.
To navigate these complexities, understanding the fundamentals of assignment in contract law and property law is crucial. It ensures that when you’re ready to pass that baton, you’re doing it in a way that’s legal, effective, and doesn’t leave you tripping up before you reach the finish line.
The goal here is to make sure everyone involved understands what’s happening and agrees to it. That way, assignments can be a useful tool to manage your contracts and property agreements, keeping things moving smoothly even when changes come up.
For more detailed exploration on this topic, consider checking the comprehensive guide on Assignment (law)). This resource dives deeper into the nuances of contract assignment, offering insights and examples that can help clarify this complex area of law.
By grasping these basics, you’re well on your way to mastering the art of contract assignment. Whether you’re dealing with leases, business deals, or any agreement in between, knowing how to effectively assign a contract can be a game-changer.
Key Differences Between Assignment and Novation
When diving into contracts, two terms that often cause confusion are assignment and novation . While both deal with transferring obligations and rights under a contract, they are fundamentally different in several key aspects. Understanding these differences is crucial for anyone involved in contract management or negotiation.
Rights Transfer
Assignment involves the transfer of benefits or rights from one party (the assignor) to another (the assignee). However, it’s important to note that only the benefits of the contract can be assigned, not the burdens. For instance, if someone has the right to receive payments under a contract, they can assign this right to someone else.
Novation , on the other hand, is more comprehensive. It involves transferring both the rights and obligations under a contract from one party to a new party. With novation, the original party is completely released from the contract, and a new contractual relationship is formed between the remaining and the new party. This is a key distinction because, in novation, all parties must agree to this new arrangement.
Obligations Transfer
Assignment doesn’t transfer the original party’s obligations under the contract. The assignor (the original party who had the rights under the contract) might still be liable if the assignee fails to fulfill the contract terms.
In contrast, novation transfers all obligations to the new party. Once a novation is complete, the new party takes over all rights and obligations, leaving the original party with no further legal liabilities or rights under the contract.
Written Agreement
While assignments can sometimes be informal or even verbal, novation almost always requires a written agreement. This is because novation affects more parties’ rights and obligations and has a more significant impact on the contractual relationship. A written agreement ensures that all parties are clear about the terms of the novation and their respective responsibilities.
In practice, the need for a written agreement in novation serves as a protection for all parties involved. It ensures that the transfer of obligations is clearly documented and legally enforceable.
For example, let’s say Alex agrees to paint Bailey’s house for $1,000. Later, Alex decides they can’t complete the job and wants Chris to take over. If Bailey agrees, they can sign a novation agreement where Chris agrees to paint the house under the same conditions. Alex is then relieved from the original contract, and Chris becomes responsible for completing the painting job.
Understanding the difference between assignment and novation is critical for anyone dealing with contracts. While both processes allow for the transfer of rights or obligations, they do so in different ways and with varying implications for all parties involved. Knowing when and how to use each can help ensure that your contractual relationships are managed effectively and legally sound.
For further in-depth information and real-life case examples on assignment in contract law, you can explore detailed resources such as Assignment (law) on Wikipedia).
Next, we’ll delve into the legal requirements for a valid assignment, touching on express prohibition, material change, future rights, and the rare skill requirement. Understanding these will further equip you to navigate the complexities of contract assignments successfully.
Legal Requirements for a Valid Assignment
When dealing with assignment in contract law , it’s crucial to understand the legal backbone that supports a valid assignment. This ensures that the assignment stands up in a court of law if disputes arise. Let’s break down the must-know legal requirements: express prohibition, material change, future rights, and rare skill requirement.
Express Prohibition
The first stop on our checklist is to look for an express prohibition against assignment in the contract. This is a clause that outright states assignments are not allowed without the other party’s consent. If such language exists and you proceed with an assignment, you could be breaching the contract. Always read the fine print or have a legal expert review the contract for you.
Material Change
Next up is the material change requirement. The law states that an assignment cannot significantly alter the duties, increase the burdens, or impair the chances of the other party receiving due performance under the contract. For instance, if the contract involves personal services tailored to the specific party, assigning it to someone else might change the expected outcome, making such an assignment invalid.
Future Rights
Another important aspect is future rights . The rule here is straightforward: you can’t assign what you don’t have. This means that a promise to assign rights you may acquire in the future is generally not enforceable at present. An effective assignment requires that the rights exist at the time of the assignment.
Rare Skill Requirement
Lastly, let’s talk about the rare skill requirement . Some contracts are so specialized that they cannot be assigned to another party without compromising the contract’s integrity. This is often the case with contracts that rely on an individual’s unique skills or trust. Think of an artist commissioned for a portrait or a lawyer hired for their specialized legal expertise. In these scenarios, assignments are not feasible as they could severely impact the contract’s intended outcome.
Understanding these legal requirements is pivotal for navigating the complexities of assignment in contract law. By ensuring compliance with these principles, you can effectively manage contract assignments, safeguarding your interests and those of the other contracting party.
For anyone looking to delve deeper into the intricacies of contract law, you can explore detailed resources such as Assignment (law) on Wikipedia).
Moving forward, we’ll explore the common types of contract assignments, from landlord-tenant agreements to business contracts and intellectual property transfers. This will give you a clearer picture of how assignments work across different legal landscapes.
Common Types of Contract Assignments
When we dive into assignment in contract law , we find it touches nearly every aspect of our business and personal lives. Let’s simplify this complex topic by looking at some of the most common types of contract assignments you might encounter.
Landlord-Tenant Agreements
Imagine you’re renting a fantastic apartment but have to move because of a new job. Instead of breaking your lease, you can assign your lease to someone else. This means the new tenant takes over your lease, including rent payments and maintenance responsibilities. However, it’s crucial that the landlord agrees to this switch. If done right, it’s a win-win for everyone involved.
![written consent to assignment of contract Landlord and tenant shaking hands - assignment in contract law](https://images.pexels.com/photos/8112168/pexels-photo-8112168.jpeg?auto=compress&cs=tinysrgb&h=650&w=940)
Business Contracts
In the business world, contract assignments are a daily occurrence. For example, if a company agrees to provide services but then realizes it’s overbooked, it can assign the contract to another company that can fulfill the obligations. This way, the project is completed on time, and the client remains happy. It’s a common practice that ensures flexibility and efficiency in business operations.
![written consent to assignment of contract Business contract signing - assignment in contract law](https://images.pexels.com/photos/6814526/pexels-photo-6814526.jpeg?auto=compress&cs=tinysrgb&h=650&w=940)
Intellectual Property
Intellectual property (IP) assignments are fascinating and complex. If an inventor creates a new product, they can assign their patent rights to a company in exchange for a lump sum or royalties. This transfer allows the company to produce and sell the invention, while the inventor benefits financially. However, it’s critical to note that with trademarks, the goodwill associated with the mark must also be transferred to maintain its value.
![written consent to assignment of contract Patent documents and invention sketches - assignment in contract law](https://images.bannerbear.com/direct/4mGpW3zwpg0ZK0AxQw/requests/000/051/071/938/Klp7yZbnLzXKdZEMY3jOX9rmG/0b53c1f744d172033968e84a5943b44d160e908c.jpg)
Understanding these types of assignments helps clarify the vast landscape of contract law. Whether it’s a cozy apartment, a crucial business deal, or a groundbreaking invention, assignments play a pivotal role in ensuring these transitions happen smoothly.
As we navigate through the realm of contract assignments, each type has its own set of rules and best practices. The key is to ensure all parties are on the same page and that the assignment is executed properly to avoid any legal pitfalls.
Diving deeper into the subject, next, we will explore how to execute a contract assignment effectively, ensuring all legal requirements are met and the process runs as smoothly as possible.
How to Execute a Contract Assignment Effectively
Executing a contract assignment effectively is crucial to ensure that all legal requirements are met and the process runs smoothly. Here’s a straightforward guide to help you navigate this process without any hiccups.
Written Consent
First and foremost, get written consent . This might seem like a no-brainer, but it’s surprising how often this step is overlooked. If the original contract requires the consent of the other party for an assignment to be valid, make sure you have this in black and white. Not just a handshake or a verbal agreement. This ensures clarity and avoids any ambiguity or disputes down the line.
Notice of Assignment
Next up, provide a notice of assignment to all relevant parties. This is not just common courtesy; it’s often a legal requirement. It informs all parties involved about the change in the assignment of rights or obligations under the contract. Think of it as updating your address with the post office; everyone needs to know where to send the mail now.
Privity of Estate
Understanding privity of estate is key in real estate transactions and leases. It refers to the legal relationship that exists between parties under a contract. When you assign a contract, the assignee steps into your shoes, but the original terms of the contract still apply. This means the assignee needs to be aware of and comply with the original agreement’s requirements.
Secondary Liability
Lastly, let’s talk about secondary liability . Just because you’ve assigned a contract doesn’t always mean you’re off the hook. In some cases, the original party (the assignor) may still hold some liability if the assignee fails to perform under the contract. It’s essential to understand the terms of your assignment agreement and whether it includes a release from liability for the assignor.
Executing a contract assignment effectively is all about dotting the I’s and crossing the T’s . By following these steps—securing written consent, issuing a notice of assignment, understanding privity of estate, and clarifying secondary liability—you’re setting yourself up for a seamless transition.
The goal is to ensure all parties are fully informed and agreeable to the changes being made. This not only helps in maintaining good relationships but also in avoiding potential legal issues down the line.
We’ll dive into some of the frequently asked questions about contract assignment to clear any lingering doubts.
Frequently Asked Questions about Contract Assignment
When navigating contracts, questions often arise, particularly about the concepts of assignment and novation. Let’s break these down into simpler terms.
What does assignment of a contract mean?
In the realm of assignment in contract law , think of assignment as passing the baton in a relay race. It’s where one party (the assignor) transfers their rights and benefits under a contract to another party (the assignee). However, unlike a relay race, the original party might still be on the hook for obligations unless the contract says otherwise. It’s like handing off the baton but still running alongside the new runner just in case.
Is an assignment legally binding?
Absolutely, an assignment is as binding as a pinky promise in the playground – but with legal muscle behind it. Once an assignment meets the necessary legal criteria (like not significantly changing the obligor’s duties or having express consent if required), it’s set in stone. This means both the assignee and the assignor must honor this transfer of rights or face potential legal actions. It’s a serious commitment, not just a casual exchange.
What is the difference between assignment and novation?
Now, this is where it gets a bit more intricate. If assignment is passing the baton, novation is forming a new team mid-race. It involves replacing an old obligation with a new one or adding a new party to take over an old one’s duties. Crucially, novation extinguishes the old contract and requires all original and new parties to agree. It’s a clean slate – the original party walks away, and the new party steps in, no strings attached.
While both assignment and novation change the playing field of a contract, novation requires a unanimous thumbs up from everyone involved, completely freeing the original party from their obligations. On the other hand, an assignment might leave the original party watching from the sidelines, ready to jump back in if needed.
Understanding these facets of assignment in contract law is crucial, whether you’re diving into a new agreement or navigating an existing one. Knowledge is power – especially when it comes to contracts.
As we wrap up these FAQs, the legal world of contracts is vast and sometimes complex, but breaking it down into bite-sized pieces can help demystify the process and empower you in your legal undertakings.
Here’s a helpful resource for further reading on the difference between assignment and cession.
Now, let’s continue on to the conclusion to tie all these insights together.
Navigating assignment in contract law can seem like a daunting task at first glance. However, with the right information and guidance, it becomes an invaluable tool in ensuring that your rights and obligations are protected and effectively managed in any contractual relationship.
At Moton Legal Group, we understand the intricacies of contract law and are dedicated to providing you with the expertise and support you need to navigate these waters. Whether you’re dealing with a straightforward contract assignment or facing more complex legal challenges, our team is here to help. We pride ourselves on our ability to demystify legal processes and make them accessible to everyone.
The key to successfully managing any contract assignment lies in understanding your rights, the obligations involved, and the potential impacts on all parties. It’s about ensuring that the assignment is executed in a way that is legally sound and aligns with your interests.
If you’re in need of assistance with a contract review, looking to understand more about how contract assignments work, or simply seeking legal advice on your contractual rights and responsibilities, Moton Legal Group is here for you. Our team of experienced attorneys is committed to providing the clarity, insight, and support you need to navigate the complexities of contract law with confidence.
For more information on how we can assist you with your contract review and other legal needs, visit our contract review service page .
In the constantly evolving landscape of contract law, having a trusted legal partner can make all the difference. Let Moton Legal Group be your guide, ensuring that your contractual dealings are handled with the utmost care, professionalism, and expertise. Together, we can navigate the complexities of contract law and secure the best possible outcomes for your legal matters.
Thank you for joining us on this journey through the fundamentals of assignment in contract law. We hope you found this information helpful and feel more empowered to handle your contractual affairs with confidence.
For more information Call :
Reach out now.
" * " indicates required fields
Recent Blog Posts:
![written consent to assignment of contract written consent to assignment of contract](https://motonlegalgroup.com/wp-content/uploads/2024/08/general-damages-300x171.jpg)
Understanding General Damages: Definitions and Examples
![written consent to assignment of contract written consent to assignment of contract](https://motonlegalgroup.com/wp-content/uploads/2024/08/corporate-organizational-structure-types-300x212.jpg)
From Hierarchical to Flat: Types of Corporate Organizational Structures
![written consent to assignment of contract written consent to assignment of contract](https://motonlegalgroup.com/wp-content/uploads/2024/08/bodily-injury-claim-300x200.jpg)
From Accident to Settlement: Understanding Bodily Injury Claims
![written consent to assignment of contract written consent to assignment of contract](https://motonlegalgroup.com/wp-content/uploads/2024/08/who-fills-out-purchase-agreement-in-real-estate-300x200.jpg)
Real Estate 101: Who Fills Out the Purchase Agreement?
![written consent to assignment of contract written consent to assignment of contract](https://motonlegalgroup.com/wp-content/uploads/2024/08/types-of-board-structure-in-corporate-governance-300x225.jpg)
Understanding Corporate Governance: Types of Board Structures
![written consent to assignment of contract written consent to assignment of contract](https://motonlegalgroup.com/wp-content/uploads/2024/07/calculate-damages-300x200.jpg)
Understanding How to Calculate Damages in Personal Injury Cases
- Drafting a Workable Contract
- Contract Tips
- Startup law
- Common Draft
- Choice of law
- Patent apps
- Marketing legal review
- Engagement agreement
- UH class notes
- Arbitration
Assignment provisions in contracts
Author’s note, Nov. 22, 2014: For a much-improved update of this page, see the Common Draft general provisions article .
(For more real-world stories like the ones below, see my PDF e-book, Signing a Business Contract? A Quick Checklist for Greater Peace of Mind , a compendium of tips and true stories to help you steer clear of various possible minefields. Learn more …. )
Table of Contents
Legal background: Contracts generally are freely assignable
When a party to a contract “ assigns ” the contract to someone else, it means that party, known as the assignor , has transferred its rights under the contract to someone else, known as the assignee , and also has delegated its obligations to the assignee.
Under U.S. law, most contract rights are freely assignable , and most contract duties are freely delegable, absent some special character of the duty, unless the agreement says otherwise. In some situations, however, the parties will not want their opposite numbers to be able to assign the agreement freely; contracts often include language to this effect.
Intellectual-property licenses are an exception to the general rule of assignability. Under U.S. law, an IP licensee may not assign its license rights, nor delegate its license obligations, without the licensor’s consent, even when the license agreement is silent. See, for example, In re XMH Corp. , 647 F.3d 690 (7th Cir. 2011) (Posner, J; trademark licenses); Cincom Sys., Inc. v. Novelis Corp. , 581 F.3d 431 (6th Cir. 2009) (copyright licenses); Rhone-Poulenc Agro, S.A. v. DeKalb Genetics Corp. , 284 F.3d 1323 (Fed. Cir. 2002) (patent licenses). For additional information, see this article by John Paul, Brian Kacedon, and Douglas W. Meier of the Finnegan Henderson firm.
Assignment consent requirements
Model language
[Party name] may not assign this Agreement to any other person without the express prior written consent of the other party or its successor in interest, as applicable, except as expressly provided otherwise in this Agreement. A putative assignment made without such required consent will have no effect.
Optional: Nor may [Party name] assign any right or interest arising out of this Agreement, in whole or in part, without such consent.
Alternative: For the avoidance of doubt, consent is not required for an assignment (absolute, collateral, or other) or pledge of, nor for any grant of a security interest in, a right to payment under this Agreement.
Optional: An assignment of this Agreement by operation of law, as a result of a merger, consolidation, amalgamation, or other transaction or series of transactions, requires consent to the same extent as would an assignment to the same assignee outside of such a transaction or series of transactions.
• An assignment-consent requirement like this can give the non-assigning party a chokehold on a future merger or corporate reorganization by the assigning party — see the case illustrations below.
• A party being asked to agree to an assignment-consent requirement should consider trying to negotiate one of the carve-out provisions below, for example, when the assignment is connection with a sale of substantially all the assets of the assignor’s business {Link} .
Case illustrations
The dubai port deal (ny times story and story ).
In 2006, a Dubai company that operated several U.S. ports agreed to sell those operations. (The agreement came about because of publicity and political pressure about the alleged national-security implications of having Middle-Eastern companies in charge of U.S. port operations.)
A complication arose in the case of the Port of Newark: The Dubai company’s lease agreement gave the Port Authority of New York and New Jersey the right to consent to any assignment of the agreement — and that agency initially demanded $84 million for its consent.
After harsh criticism from political leaders, the Port Authority backed down a bit: it gave consent in return for “only” a $10 million consent fee, plus $40 million investment commitment by the buyer.
Cincom Sys., Inc. v. Novelis Corp., No. 07-4142 (6th Cir. Sept. 25, 2009) (affirming summary judgment)
A customer of a software vendor did an internal reorganization. As a result, the vendor’s software ended up being used by a sister company of the original customer. The vendor demanded that the sister company buy a new license. The sister company refused.
The vendor sued, successfully, for copyright infringement, and received the price of a new license, more than $450,000 as its damages. The case is discussed in more detail in this blog posting.
The vendor’s behavior strikes me as extremely shortsighted, for a couple of reasons: First, I wouldn’t bet much on the likelihood the customer would ever buy anything again from that vendor. Second, I would bet that the word got around about what the vendor did, and that this didn’t do the vendor’s reputation any good.
Meso Scale Diagnostics, LLC v. Roche Diagnostics GmbH, No. 5589-VCP (Del. Ch. Apr. 8, 2011) (denying motion to dismiss).
The Delaware Chancery Court refused to rule out the possibility that a reverse triangular merger could act as an assignment of a contract, which under the contract terms would have required consent. See also the discussion of this opinion by Katherine Jones of the Sheppard Mullin law firm.
Assignment with transfer of business assets
Consent is not required for an assignment of this Agreement in connection with a sale or other disposition of substantially all the assets of the assigning party’s business.
Optional: Alternatively, the sale or other disposition may be of substantially all the assets of the assigning party’s business to which this Agreement specifically relates.
Optional: The assignee must not be a competitor of the non-assigning party.
• A prospective assigning party might argue that it needed to keep control of its own strategic destiny, for example by preserving its freedom to sell off a product line or division (or even the whole company) in an asset sale.
• A non-assigning party might argue that it could not permit the assignment of the agreement to one of its competitors, and that the only way to ensure this was to retain a veto over any assignment.
• Another approach might be to give the non-assigning party, instead of a veto over asset-disposition assignments, the right to terminate the contract for convenience . (Of course, the implications of termination would have to be carefully thought through.)
Assignment to affiliate
[Either party] may assign this Agreement without consent to its affiliate.
Optional: The assigning party must unconditionally guarantee the assignee’s performance.
Optional: The affiliate must not be a competitor of the non-assigning party.
Optional: The affiliate must be a majority-ownership affiliate of the assigning party.
• A prospective assigning party might argue for the right to assign to an affiliate to preserve its freedom to move assets around within its “corporate family” without having to seek approval.
• The other party might reasonably object that there is no way to know in advance whether an affiliate-assignee would be in a position to fulfill the assigning party’s obligations under the contract, nor whether it would have reachable assets in case of a breach.
Editorial comment: Before approving a blanket affiliate-assignment authorization, a party should consider whether it knew enough about the other party’s existing- or future affiliates to be comfortable with where the agreement might end up.
Consent may not be unreasonably withheld or delayed
Consent to an assignment of this Agreement requiring it may not be unreasonably withheld or delayed.
Optional: For the avoidance of doubt, any damages suffered by a party seeking a required consent to assignment of this Agreement, resulting from an unreasonable withholding or delay of such consent, are to be treated as direct damages.
Optional: For the avoidance of doubt, any damages suffered by a party seeking a required consent to assignment of this Agreement, resulting from an unreasonable withholding or delay of such consent, are not subject to any exclusion of remedies or other limitation of liability in this Agreement.
• Even if this provision were absent, applicable law might impose a reasonableness requirement; see the discussion of the Shoney case in the commentary to the Consent at discretion provision.
• A reasonableness requirement might not be of much practical value, whether contractual or implied by law. Such a requirement could not guarantee that the non-assigning party would give its consent when the assigning party wants it. And by the time a court could resolve the matter, the assigning party’s deal could have been blown.
• Still, an unreasonable-withholding provision should make the non-assigning party think twice about dragging its feet too much, becuase of the prospect of being held liable for damages for a busted transaction. Cf. Pennzoil vs. Texaco and its $10.5 billion damage award for tortious interference with an M&A deal.
• Including an unreasonable-delay provision might conflict with the Materiality of assignment breach provision, for reasons discussed there in the summary of the Hess Energy case.
Consent at discretion
A party having the right to grant or withhold consent to an assignment of this Agreement may do so in its sole and unfettered discretion.
• If a party might want the absolute right to withhold consent to an assignment in its sole discretion, it would be a good idea to try to include that in the contract language. Otherwise, there’s a risk that court might impose a commercial-reasonableness test under applicable law (see the next bullet). On the other hand, asking for such language but not getting it could be fatal to the party’s case that it was implicitly entitled to withhold consent in its discretion.
• If a commercial- or residential lease agreement requires the landlord’s consent before the tentant can assign the lease, state law might impose a reasonableness requirement. I haven’t researched this, but ran across an unpublished California opinion and an old law review article, each collecting cases. See Nevada Atlantic Corp. v. Wrec Lido Venture, LLC, No. G039825 (Cal. App. Dec. 8, 2008) (unpublished; reversing judgment that sole-discretion withholding of consent was unreasonable); Paul J. Weddle, Pacific First Bank v. New Morgan Park Corporation: Reasonable Withholding of Consent to Commercial Lease Assignments , 31 Willamette L. Rev. 713 (1995) (first page available for free at HeinOnline ).
![](http://writinghelp.online/777/templates/cheerup/res/banner1.gif)
Shoney’s LLC v. MAC East, LLC, No. 1071465 (Ala. Jul. 31, 2009)
In 2009, the Alabama Supreme Court rejected a claim that Shoney’s restaurant chain breached a contract when it demanded a $70,000 to $90,000 payment as the price of its consent to a proposed sublease. The supreme court noted that the contract specifically gave Shoney’s the right, in its sole discretion , to consent to any proposed assignment or sublease.
Significantly, prior case law from Alabama was to the effect that a refusal to consent would indeed be judged by a commercial-reasonableness standard. But, the supreme court said, “[w]here the parties to a contract use language that is inconsistent with a commercial-reasonableness standard, the terms of such contract will not be altered by an implied covenant of good faith. Therefore, an unqualified express standard such as ‘sole discretion’ is also to be construed as written.” Shoney’s LLC v. MAC East, LLC , No. 1071465 (Ala. Jul. 31, 2009) (on certification by Eleventh Circuit), cited by MAC East, LLC v. Shoney’s [LLC] , No. 07-11534 (11th Cir. Aug. 11, 2009), reversing No. 2:05-cv-1038-MEF (WO) (M.D. Ala. Jan. 8, 2007) (granting partial summary judgment that Shoney’s had breached the contract).
Termination by non-assigning party
A non-assigning party may terminate this Agreement, in its business discretion , by giving notice to that effect no later than 60 days after receiving notice, from either the assigning party or the assignee, that an assignment of the Agreement has become effective.
Consider an agreement in which a vendor is to provide ongoing services to a customer. A powerful customer might demand the right to consent to the vendor’s assignment of the agreement, even in strategic transactions. The vendor, on the other hand, might refuse to give any customer that kind of control of its strategic options.
A workable compromise might be to allow the customer to terminate the agreement during a stated window of time after the assignment if it is not happy with the new vendor.
Assignment – other provisions
Optional: Delegation: For the avoidance of doubt, an assignment of this Agreement operates as a transfer of the assigning party’s rights and a delegation of its duties under this Agreement.
Optional: Promise to perform: For the avoidance of doubt, an assignee’s acceptance of an assignment of this Agreement constitutes the assignee’s promise to perform the assigning party’s duties under the Agreement. That promise is enforceable by either the assigning party or by the non-assigning party.
Optional: Written assumption by assignee: IF: The non-assigning party so requests of an assignee of this Agreement; THEN: The assignee will seasonably provide the non-assigning party with a written assumption of the assignor’s obligations, duly executed by or on behalf of the assignee; ELSE: The assignment will be of no effect.
Optional: No release: For the avoidance of doubt, an assignment of this Agreement does not release the assigning party from its responsibility for performance of its duties under the Agreement unless the non-assigning party so agrees in writing.
Optional: Confidentiality: A non-assigning party will preserve in confidence any non-public information about an actual- or proposed assignment of this Agreement that may be disclosed to that party by a party participating in, or seeking consent for, the assignment.
The Delegation provision might not be necessary in a contract for the sale of goods governed by the Uniform Commercial Code, because a similar provision is found in UCC 2-210
The Confidentiality provision would be useful if a party to the agreement anticipated that it might be engaging in any kind of merger or other strategic transaction.
Materiality of assignment breach
IF: A party breaches any requirement of this Agreement that the party obtain another party’s consent to assign this Agreement; THEN: Such breach is to be treated as a material breach of this Agreement.
A chief significance of this kind of provision is that failure to obtain consent to assignment, if it were a material breach, would give the non-assigning party the right to terminate the Agreement.
If an assignment-consent provision requires that consent not be unreasonably withheld , then failure to obtain consent to a reasonable assignment would not be a material breach, according to the court in Hess Energy Inc. v. Lightning Oil Co. , No. 01-1582 (4th Cir. Jan. 18, 2002) (reversing summary judgment). In that case, the agreement was a natural-gas supply contract. The customer was acquired by a larger company, after which the larger company took over some of the contract administration responsibilities such as payment of the vendor’s invoices. The vendor, seeking to sell its gas to someone else at a higher price, sent a notice of termination, on grounds that the customer had “assigned” the agreement to its new parent company, in violation of the contract’s assignment-consent provision. The appeals court held that, even if the customer had indeed assigned the contract (a point on which it expressed considerable doubt) without consent, the resulting breach of the agreement was not material, and therefore the vendor did not have the right to terminate the contract.
See also (list is generated automatically) :
- Notebook update: Reverse triangular merger might be an assignment of a contract, requiring consent Just updated the Notebook with a citation to a case in which the Delaware Chancery Court refused to rule out the possibility that a reverse...
- Assignment-consent requirements can cause serious problems in future M&A transactions A lot of contracts provide that Party A must obtain the prior written consent of Party B if it wishes to assign the agreement to a...
- SCOTX rejects implied obligation not to unreasonably withhold consent to assignment of contract In a recent Texas case, two sophisticated parties in the oil and gas business — let’s call them Alpha and Bravo — were negotiating a contract....
- Ken Adams and the marketplace of ideas I (used to) comment occasionally at Ken Adams’s blog. Recent examples: Here, here, here, here, and here. Ken and I disagree on a number of issues; some...
Dell “D. C.” Toedt III
![title= written consent to assignment of contract](https://www.oncontracts.com/docs/DCT-head-shot-linked-in-2015-06.jpg)
Subscribe via Email
I won\'t spam you
Email Address
![title= written consent to assignment of contract](https://www.oncontracts.com/docs/Cover-page-Signing-a-Contract6.jpg)
Common Draft annotated contract form book project
Contract drafting tips
Choice of law cheat sheets
Contract review: A final checklist before you sign
Legal cheat sheet for business
Tips for new general counsel
Patent apps at lower cost
Privacy policy sample
Attorney-client engagement agreement form
Why we lawyers can seem like such weasels
This site rocks the Classic Responsive Skin for Thesis .
![Get started for free Contract Assignment Agreement](https://www.wonder.legal/Les_thumbnails/contract-assignment-agreement.png)
How does it work?
1. choose this template.
Start by clicking on "Fill out the template"
2. Complete the document
Answer a few questions and your document is created automatically.
3. Save - Print
Your document is ready! You will receive it in Word and PDF formats. You will be able to modify it.
Contract Assignment Agreement
Rating: 4.8 - 105 votes
This Contract Assignment Agreement document is used to transfer rights and responsibilities under an original contract from one Party, known as the Assignor, to another, known as the Assignee. The Assignor who was a Party to the original contract can use this document to assign their rights under the original contract to the Assignee, as well as delegating their duties under the original contract to that Assignee. For example, a nanny who as contracted with a family to watch their children but is no longer able to due to a move could assign their rights and responsibilities under the original service contract to a new childcare provider.
How to use this document
Prior to using this document, the original contract is consulted to be sure that an assignment is not prohibited and that any necessary permissions from the other Party to the original contract, known as the Obligor, have been obtained. Once this has been done, the document can be used. The Agreement contains important information such as the identities of all parties to the Agreement, the expiration date (if any) of the original contract, whether the original contract requires the Obligor's consent before assigning rights and, if so, the form of consent that the Assignor obtained and when, and which state's laws will govern the interpretation of the Agreement.
If the Agreement involves the transfer of land from one Party to another , the document will include information about where the property is located, as well as space for the document to be recorded in the county's official records, and a notary page customized for the land's location so that the document can be notarized.
Once the document has been completed, it is signed, dated, and copies are given to all concerned parties , including the Assignor, the Assignee, and the Obligor. If the Agreement concerns the transfer of land, the Agreement is then notarized and taken to be recorded so that there is an official record that the property was transferred.
Applicable law
The assignment of contracts that involve the provision of services is governed by common law in the " Second Restatement of Contracts " (the "Restatement"). The Restatement is a non-binding authority in all of U.S common law in the area of contracts and commercial transactions. Though the Restatement is non-binding, it is frequently cited by courts in explaining their reasoning in interpreting contractual disputes.
The assignment of contracts for sale of goods is governed by the Uniform Commercial Code (the "UCC") in § 2-209 Modification, Rescission and Waiver .
How to modify the template
You fill out a form. The document is created before your eyes as you respond to the questions.
At the end, you receive it in Word and PDF formats. You can modify it and reuse it.
Contract Assignment Agreement - FREE - Sample, template
Country: United States
General Business Documents - Other downloadable templates of legal documents
- Amendment to Agreement
- Loan Agreement
- Loan Agreement Modification
- Release of Loan Agreement
- Non-Compete Agreement
- Partnership Dissolution Agreement
- Notice of Withdrawal from Partnership
- Power Of Attorney
- Debt Acknowledgment Form
- Meeting Minutes
- Request to Alter Contract
- Release Agreement
- Guaranty Agreement
- Joint Venture Agreement
- Debt Settlement Agreement
- Breach of Contract Notice
- Corporate Proxy
- Mutual Rescission and Release Agreement
- Notice for Non-Renewal of Contract
- Meeting Notice
- Other downloadable templates of legal documents
- More Blog Popular
- Who's Who Legal
- Instruct Counsel
- My newsfeed
- Save & file
- View original
- Follow Please login to follow content.
add to folder:
- My saved (default)
Register now for your free, tailored, daily legal newsfeed service.
Find out more about Lexology or get in touch by visiting our About page.
5 steps to obtaining consent to an assignment
![written consent to assignment of contract Gilbert + Tobin logo](https://d2dzik4ii1e1u6.cloudfront.net/images/lexology/firm/new/d1d1cd27-56ad-48bc-ac41-678fbea13c54/W350/20220420011403.png)
Farm in, joint venture or sale agreements usually contain an assignment clause by which the holder of an interest in a mining tenement may assign its interests under an agreement and/or in a mining tenement to a third party ( Assignee ). The assignment clause is often drafted in terms requiring the assigning party ( Assignor ) to first obtain the non-assigning party’s written consent to the assignment but that the consent cannot be unreasonably withheld by the non-assigning party. Usually the assignment clause also requires the Assignee to agree to be bound by the terms of the agreement with the non-assigning party.
What happens when the non-assigning party refuses to consent? This note examines circumstances where consent is considered to have been unreasonably withheld and proposes some practical steps for an Assignor to consider when seeking the non-assigning party’s consent to assign interests in a mining tenement to an Assignee.
When consent is unreasonably withheld
The proper interpretation of the contract containing the assignment clause is of critical importance in determining whether consent to an assignment has been unreasonably withheld. This is because a non-assigning party may be acting unreasonably in withholding consent if:
- the reasons for withholding consent are unrelated to the objects of the contract, or to rights, benefits or obligations under the contract;
- the reasons for withholding consent are not permissible under the contract and are inconsistent with its provisions;
- the reasons for withholding consent are not held honestly by the non-assigning party.
All of the facts existing at the time that consent is refused by the non-assigning party are relevant in deciding whether consent has been unreasonably withheld (whether or not known to the party refusing consent), including the party’s own conduct in refusing consent and the reasons given (or not given) for the refusal.
Steps to consider when seeking consent to an assignment
An Assignor seeking consent from the non-assigning party should always prepare for the prospect that a dispute may develop and require intervention by a court. The onus will be on the Assignor to prove to a court that consent has been unreasonably withheld by the non-assigning party.
The Assignor should consider:
- having an initial meeting with the non-assigning party to explain the background to the proposed assignment and to find out what information is required by the non-assigning party to consider the consent request;
- confirming in writing with the non-assigning party the information required to consider the consent request;
- providing any information requested by the non-assigning party;
- seeking consent in writing from the non-assigning party;
- seeking written confirmation of the non-assigning party’s reasons for refusing consent (if consent is withheld).
If negotiation is unsuccessful, an Assignor may have no option but to commence proceedings seeking a declaration that the withholding of consent was unreasonable and an order that the non-assigning party do all things necessary to allow the transfer of the tenement.
In a consent dispute a court will examine the parties’ conduct in deciding whether consent was unreasonably withheld. Therefore, it is critical that the Assignor obtains as much information as possible about the non-assigning party’s reasons for refusing consent and documents all of its dealings with the non-assigning party.
Filed under
- Energy & Natural Resources
- Gilbert + Tobin
Popular articles from this firm
Taylor swift highlights harmful ai use: a tale of two “deepfakes” *, landmark federal court penalty for asic greenwashing proceeding *, boardroom brief week commencing 5 august 2024 *, at a glance: data protection and management of health data in australia *, the privacy act reform bill - is august the month that it will happen *.
If you would like to learn how Lexology can drive your content marketing strategy forward, please email [email protected] .
![written consent to assignment of contract Powered by Lexology](https://www.lexology.com/images/redesign_2015/Powered_by_Lexology_Logo-print.png)
Professional development
Development Consent Orders - A Practical Introduction - Learn Live
Related practical resources PRO
- Checklist Checklist: Obtaining and managing consent under the GDPR (EU)
- Checklist Checklist: Complying with cookie requirements under the PECR and the GDPR (UK)
- How-to guide How-to guide: Practical steps to consider when drafting consumer arbitration agreements (USA)
Related research hubs
![written consent to assignment of contract](https://constructionexec.com/_next/image?url=https%3A%2F%2Fcdn.sanity.io%2Fimages%2Fukz2ww8p%2Fproduction%2F9616c4cc8a1de2ab9b394e400f067032f89fa2c7-2000x1250.jpg&w=1600&q=75)
Understanding the Contractor’s Consent: The Hidden Dangers in a Common Form
The “Contractor’s Consent to Assignment” or “Contractor’s Consent” is a common form requested at the start of a commercial construction project and required by the lender. Many times, owners will wait until the prime contract is signed to present contractors with this document, which they present as a matter of housekeeping.
The purpose of the Contractor’s Consent is to allow the owner’s bank to assume ownership in the event that the owner defaults on its loan in order to allow the bank to compel the contractor complete the project. These documents serve a legitimate purpose in ensuring that the bank will not be left with a hole in the ground; however, the contracts have significant legal consequences and often include substantial waivers and promises that contractors would never accept during negotiation of the prime contract.
When reviewing these documents, contractors should keep an eye out for the following clauses, which can drastically affect their rights regardless of whether the owner actually comes to default on their loan.
Limitation on Change Orders
Most Contractor’s Consent forms include provisions barring a contractor from entering into an agreement with the owner to amend the Construction Contract without the written approval of the lender. These provisions ensure that the business terms of a deal the bank is financing don’t change without the bank’s express consent.
While reasonable in purpose, these provisions can present a problematic roadblock as project schedules rarely allow for the additional time needed to obtain these approvals, and the stated obligation means that even legitimate change orders signed by the owner for work already performed may be deemed invalid if the contractor did not wait for the bank’s approval.
To correct this provision, contractors should request that approvals either be limited to change orders exceeding a certain threshold amount for individual change orders or exceeding a total amount for all changes. This not only allows the project to keep moving without unnecessary delays, but also ensures that significant changes won’t be made without the bank’s knowledge.
Limitation on Termination Right
Many forms also include language that restricts the contractor’s right to suspend or terminate the contract without the bank’s approval. Contractors should strongly resist such provisions, as they need the ability to stop work (and to stop incurring obligations to their subcontractors) in the instance they are not being paid—regardless of whether the owner is making its loan payments.
To address this concern, most banks will allow contractors to amend these provisions to suspend or terminate, but only after they have given the bank advance notice. This adjustment helps both the contractor and the bank, giving the contractor the ability to put more pressure on the owner by notifying the bank of any default and to stop work if needed, while simultaneously allowing the bank to receive earlier notice of problems on the project.
Waiver or Subrogation of Mechanics’ Lien Rights
Many banks ask the contractor to waive their mechanics’ lien rights (or allow the bank to step in front of the lien) as part of the Contractor’s Consent. Contractors should push back strongly on such provisions as liens are powerful and are often the only way to receive payment if the owner becomes bankrupt. In many instances, banks will agree—albeit reluctantly—to accept this change, but contractors should expect some pushback, and this may be a sticking point.
Waiver of Unpaid Amounts
Nearly all Contractor’s Consent forms include language that requires the contractor to continue performance once the bank takes place of an owner, as long as the bank pays all bills from that point forward. While this may seem reasonable on the surface, this provision leaves the contractor unpaid for all amounts owed at the time of the default, and these amounts almost always remain unsatisfied.
Instead, contractors should insist that if the bank assumes the contract, then the bank must also assume the owner’s obligations—including payment of outstanding amounts. Again, banks will push back on this modification to the terms but, in the end, most will accept some version of this provision.
Ability to Sell and Assign
Many forms include language allowing the bank to sell or assign the project to a third party in the event of an owner default. Because most banks are not in the business of owning and operating projects, this can leave the contractor at significant risk if the bank selects either a disreputable owner for the new assignment or an entity presenting a payment risk.
To avoid this risk, contractors should insist that they must be allowed to accept or reject the bank’s chosen assignee, with the caveat that approval will not unreasonably be withheld.
Contractors should be aware that some banks will balk at some of these positions, and negotiation may be tense at a time when all parties are anxious for the project to start. Nonetheless, contractors that insist on fair contracts will have greater protections and will be in better position to avoid the significant pitfalls that could otherwise result.
![written consent to assignment of contract webinars](https://constructionexec.com/images/widgets/webinars.png)
Top reads today
![written consent to assignment of contract How Generative AI Can Help Fight Construction Fraud Cover Art](https://constructionexec.com/_next/image?url=https%3A%2F%2Fcdn.sanity.io%2Fimages%2Fukz2ww8p%2Fproduction%2Fd4c33b63233cefdd9b796b06883b422b10739c97-1600x900.jpg%3Fw%3D832&w=1600&q=75)
How Generative AI Can Help Fight Construction Fraud
![written consent to assignment of contract The Alarming Cost of Labor Productivity Losses in Construction Cover Art](https://constructionexec.com/_next/image?url=https%3A%2F%2Fcdn.sanity.io%2Fimages%2Fukz2ww8p%2Fproduction%2F021358c45ff5b739a3a8b0ae9d06e85a17980101-1600x900.jpg%3Fw%3D832&w=1600&q=75)
The Alarming Cost of Labor Productivity Losses in Construction
![written consent to assignment of contract Exploring the Nuances of Workers’ Compensation Insurance for Contractors Cover Art](https://constructionexec.com/_next/image?url=https%3A%2F%2Fcdn.sanity.io%2Fimages%2Fukz2ww8p%2Fproduction%2Fcdcf876a32f22da1d46a21050d1eb878d0d2078f-1600x900.jpg%3Fw%3D832&w=1600&q=75)
Exploring the Nuances of Workers’ Compensation Insurance for Contractors
![written consent to assignment of contract newsletter](https://constructionexec.com/images/widgets/newsletter.png)
Related stories
![written consent to assignment of contract Untangling Unique Legal Issues in Modern Modular Construction Cover Art](https://constructionexec.com/_next/image?url=https%3A%2F%2Fcdn.sanity.io%2Fimages%2Fukz2ww8p%2Fproduction%2F3216d8ee1a96b9bd71c688f435121e6bd8531751-1600x900.jpg%3Fw%3D832&w=1600&q=75)
Untangling Unique Legal Issues in Modern Modular Construction
![written consent to assignment of contract ABC Endorses Donald Trump for President Cover Art](https://constructionexec.com/_next/image?url=https%3A%2F%2Fcdn.sanity.io%2Fimages%2Fukz2ww8p%2Fproduction%2Faec429547864274d439900d7ef00b268ffe16f1c-1600x900.jpg%3Fw%3D832&w=1600&q=75)
ABC Endorses Donald Trump for President
![written consent to assignment of contract Executive Insights 2024: Leaders in Construction Law Cover Art](https://constructionexec.com/_next/image?url=https%3A%2F%2Fcdn.sanity.io%2Fimages%2Fukz2ww8p%2Fproduction%2Fef419c35d02db3a0165b3e660a2c09d037ace1ee-1600x900.jpg%3Fw%3D832&w=1600&q=75)
Executive Insights 2024: Leaders in Construction Law
- Business Development
- Business Risk
- Productivity
- Project Delivery
- Award Winners
- Executive Profiles
- Human Resources
- Recruitment
- Young Professionals
- Organization Culture
- Total Human Health
- Risk Management
- Surety Bonding
- Dispute Resolution
- Legislation
- Regulations
- Artificial Intelligence
- Cybersecurity
- Data Analytics
- Drones / UAV’s
- Jobsite Monitoring
- Project Management
- Workforce Management
- Fleet Management
- Fuel Tracking
- Heavy Equipment
- Infrastructure
- Institutional
- Manufacturing
- Multifamily
- Residential
- Sponsored Content
- Nuts + Bolts
top 50 lists
- Construction Law Firms™
- Construction Accounting Firms™
- Construction Technology Firms™
- Latest Issue
- Magazine Archive
- Resource Center
construction executive
- Contact and Support
- Advertising
- Editorial Submission
Subscribe to Our Newsletter
Assignment of Rights and Obligations Under a Contract: Everything You Need to Know
An assignment of rights and obligations under a contract occurs when a party assigns their contractual rights to a third party. 3 min read updated on October 29, 2020
An assignment of rights and obligations under a contract occurs when a party assigns their contractual rights to a third party. The benefit that the issuing party would have received from the contract is now assigned to the third party. The party appointing their rights is referred to as the assignor, while the party obtaining the rights is the assignee.
What Is an Assignment of Contract?
In an assignment contract, the assignor prefers that the assignee reverses roles and assumes the contractual rights and obligations as stated in the contract. Before this can occur, all parties to the original contract must be notified.
Contracts create duties and rights. An obligor is the party who is legally or contractually obliged to provide a benefit or payment to another, while an obligation is owed to the obligee. The obligee transfers a right to obtain a benefit owed by the obligor to a third party. At this point, the obligee becomes an assignor. An assignor is the party that actually creates an assignment.
The party that creates an assignment is both the obligee and a transferor. The assignee receives the right to acquire the obligations of the promisor/obligor. The assignor can assign any right to the obligor unless:
- Doing so will materially alter the obligation
- It's materially burdening
- It decreases the value of the original contract
- It increases their risk
- Public policy or a statute makes it illegal
- The contract prevents assignment
Assignments are important in business financing, especially in factoring . A factor is someone who purchases a right to receive a benefit from someone else.
How Assignments Work
The specific language used in the contract will determine how the assignment plays out. For example, one contract may prohibit assignment, while another contract may require that all parties involved agree to it before proceeding. Remember, an assignment of contract does not necessarily alleviate an assignor from all liability. Many contracts include an assurance clause guaranteeing performance. In other words, the initial parties to the contract guarantee the assignee will achieve the desired goal.
When Assignments Will Not Be Enforced
The following situations indicate when an assignment of a contract is not enforced:
- The contract specifically prohibits assignment
- The assignment drastically changes the expected outcome
- The assignment is against public policy or illegal
- The contract contains a no-assignment clause
- The assignment is for a future right that only would be attainable in a contract in the future
- The contract hasn't been finalized or written yet
Delegation vs. Assignment
Occasionally, one party in a contract will desire to pass on or delegate their responsibility to a third party without creating an assignment contract. Some duties are so specific in nature they cannot be delegated. Adding a clause in the contract to prevent a party from delegating their responsibilities and duties is highly recommended.
Characteristics of Assignments
An assignment involves the transfer by an assignor of some or all of its rights to receive performance under the contract to an assignee. The assignee then receives all the benefits of the assigned rights. The assignment doesn't eliminate or reduce the assignor's performance commitments to the nonassigning party.
Three Steps to Follow if You Want to Assign a Contract
There are three main steps to take if you're looking to assign a contract:
- Make sure the current contract does not contain an anti-assignment clause
- Officially execute the assignment by transferring the parties' obligations and rights
- Notify the obligor of the changes made
Once the obligor is notified, the assignor will effectively be relieved of liability.
Anti-Assignment Clauses
If you'd prefer not to allow the party you're doing business with to assign a contract, you may be able to prevent this from occurring by clearly stating anti-assignment clauses in the original contract. The three most common anti-assignment clauses are:
- Consent required for assignment
- Consent not needed for new owners or affiliates
- Consent not unreasonably withheld
Based on these three clauses, no party in the contract is allowed to delegate or assign any obligations or rights without prior written consent from the other parties. Any delegation or assignment in violation of this passage shall be deemed void. It is not possible to write an anti-assignment clause that goes against an assignment that is issued or ordered by a court.
If you need help with an assignment of rights and obligations under a contract, you can post your job on UpCounsel's marketplace. UpCounsel accepts only the top 5 percent of lawyers to its site. Lawyers on UpCounsel come from law schools such as Harvard Law and Yale Law and average 14 years of legal experience, including work with or on behalf of companies like Google, Menlo Ventures, and Airbnb.
Hire the top business lawyers and save up to 60% on legal fees
Content Approved by UpCounsel
- Assignment Contract Law
- Legal Assignment
- Assignment Law
- Assignment of Rights Example
- What Is the Definition of Assigns
- Partial Assignment of Contract
- Assignment Of Contracts
- Consent to Assignment
- Delegation vs Assignment
- Assignment of Contract Rights
![written consent to assignment of contract](https://www.techcontracts.com/wp-content/smush-webp/2024/03/Tech-Contracts-Academy-Logo_REG_Color_FINAL.png.webp)
Don’t Confuse Change of Control and Assignment Terms
- David Tollen
- September 11, 2020
An assignment clause governs whether and when a party can transfer the contract to someone else. Often, it covers what happens in a change of control: whether a party can assign the contract to its buyer if it gets merged into a company or completely bought out. But that doesn’t make it a change of control clause. Change of control terms don’t address assignment. They say whether a party can terminate if the other party goes through a merger or other change of control. And they sometimes address other change of control consequences.
Don’t confuse the two. In a contract about software or other IT, you should think through the issues raised by each. (Also, don’t confuse assignment of contracts with assignment of IP .)
Here’s an assignment clause:
Assignment. Neither party may assign this Agreement or any of its rights or obligations hereunder without the other’s express written consent, except that either party may assign this Agreement to the surviving party in a merger of that party into another entity or in an acquisition of all or substantially all its assets. No assignment becomes effective unless and until the assignee agrees in writing to be bound by all the assigning party’s obligations in this Agreement. Except to the extent forbidden in this Section __, this Agreement will be binding upon and inure to the benefit of the parties’ respective successors and assigns.
As you can see, that clause says no assignment is allowed, with one exception:
- Assignment to Surviving Entity in M&A: Under the clause above, a party can assign the contract to its buyer — the “surviving entity” — if it gets merged into another company or otherwise bought — in other words, if it ceases to exist through an M&A deal (or becomes an irrelevant shell company).
Consider the following additional issues for assignment clauses:
- Assignment to Affiliates: Can a party assign the contract to its sister companies, parents, and/or subs — a.k.a. its “Affiliates”?
- Assignment to Divested Entities: If a party spins off its key department or other business unit involved in the contract, can it assign the contract to that spun-off company — a.k.a. the “divested entity”? That’s particularly important in technology outsourcing deals and similar contracts. They often leave a customer department highly dependent on the provider’s services. If the customer can’t assign the contract to the divested entity, the spin-off won’t work; the new/divested company won’t be viable.
- Assignment to Competitors: If a party does get any assignment rights, can it assign to the other party’s competitors ? (If so, you’ve got to define “Competitor,” since the word alone can refer to almost any company.)
- All Assignments or None: The contract should usually say something about assignments. Otherwise, the law might allow all assignments. (Check your jurisdiction.) If so, your contracting partner could assign your agreement to someone totally unacceptable. (Most likely, though, your contracting partner would remain liable.) If none of the assignments suggested above fits, forbid all assignments.
Change of Control
Here’s a change of control clause:
Change of Control. If a party undergoes a Change of Control, the other party may terminate this Agreement on 30 days’ written notice. (“Change of Control” means a transaction or series of transactions by which more than 50% of the outstanding shares of the target company or beneficial ownership thereof are acquired within a 1-year period, other than by a person or entity that owned or had beneficial ownership of more than 50% of such outstanding shares before the close of such transactions(s).)
![written consent to assignment of contract Contract terminated, due to change of control.](https://www.techcontracts.com/sitefiles/wp-content/uploads/2020/09/Terminated-for-change-of-control-300x284.jpg)
- Termination on Change of Control: A party can terminate if controlling ownership of the other party changes hands.
Change of control and assignment terms actually address opposite ownership changes. If an assignment clause addresses change of control, it says what happens if a party goes through an M&A deal and no longer exists (or becomes a shell company). A change of control clause, on the other hand, matters when the party subject to M&A does still exist . That party just has new owners (shareholders, etc.).
Consider the following additional issues for change of control clauses:
- Smaller Change of Ownership: The clause above defines “Change of Control” as any 50%-plus ownership shift. Does that set the bar too high? Should a 25% change authorize termination by the other party, or even less? In public companies and some private ones, new bosses can take control by acquiring far less than half the stock.
- No Right to Terminate: Should a change of control give any right to terminate, and if so, why? (Keep in mind, all that’s changed is the party’s owners — possibly irrelevant shareholders.)
- Divested Entity Rights: What if, again, a party spins off the department or business until involved in the deal? If that party can’t assign the contract to the divested entity, per the above, can it at least “sublicense” its rights to products or service, if it’s the customer? Or can it subcontract its performance obligations to the divested entity, if it’s the provider? Or maybe the contract should require that the other party sign an identical contract with the divested entity, at least for a short term.
Some of this text comes from the 3rd edition of The Tech Contracts Handbook , available to order (and review) from Amazon here , or purchase directly from its publisher, the American Bar Association, here.
Want to do tech contracts better, faster, and with more confidence? Check out our training offerings here: https://www.techcontracts.com/training/ . Tech Contracts Academy has options to fit every need and schedule: Comprehensive Tech Contracts M aster Classes™ (four on-line classes, two hours each), topical webinars (typically about an hour), customized in-house training (for just your team). David Tollen is the founder of Tech Contracts Academy and our primary trainer. An attorney and also the founder of Sycamore Legal, P.C. , a boutique IT, IP, and privacy law firm in the San Francisco Bay Area, he also serves as an expert witness in litigation about software licenses, cloud computing agreements, and other IT contracts.
© 2020, 2022 by Tech Contracts Academy, LLC. All rights reserved.
Thank you to Pixabay.com for great, free stock images!
Related Posts
Consequential damages in it contracts (crowdstrike vs delta air lines).
The very public argument between CrowdStrike and Delta Air Lines offers a window into a topic few understand: the exclusion of consequential damages in typical
Thoughts about our future jobs, from David Tollen
Watch this video for some encouraging (and non-typical) thoughts about our future jobs, from David Tollen. And if you’d like hone these very skills, our
New LIVE Trainings Coming in September
We invite you to join our live trainings this fall: Our Tech Contracts Master Class series runs Sept. 17, Sept. 24, Oct. 8, and Oct. 17, 2024. Four courses,
August 13 LinkedIn Live: Legalese and Complexity
We hear that contracts should be clear and brief. We also see the opposite: baffling, medieval-sounding language, reading like a charter from the king. What’s
![written consent to assignment of contract Tech Contracts](https://www.techcontracts.com/wp-content/smush-webp/2024/03/Tech-Contracts-Academy-Logo_REG_Color_FINAL.png.webp)
Our website uses cookies. If you click “Deny” or don’t respond, our system will ask your browser not to accept tracking or statistics-collecting cookies from our site, but not functional cookies. You may still receive script other technologies that Google Analytics or our other vendors use for anonymous tracking and statistics collection. For further information, please see our Cookie Policy per the link below.
- Practical Law
Request for Consent to Assignment of Contract
Practical law standard document 5-529-2265 (approx. 13 pages), get full access to this document with a free trial.
Try free and see for yourself how Practical Law resources can improve productivity, efficiency and response times.
About Practical Law
This document is from Thomson Reuters Practical Law, the legal know-how that goes beyond primary law and traditional legal research to give lawyers a better starting point. We provide standard documents, checklists, legal updates, how-to guides, and more.
650+ full-time experienced lawyer editors globally create and maintain timely, reliable and accurate resources across all major practice areas.
83% of customers are highly satisfied with Practical Law and would recommend to a colleague.
81% of customers agree that Practical Law saves them time.
- General Contract and Boilerplate
![](http://writinghelp.online/777/templates/cheerup/res/banner1.gif)
COMMENTS
Assignment clauses are legally binding provisions in contracts that give a party the chance to engage in a transfer of ownership or assign their contractual obligations and rights to a different contracting party. In other words, an assignment clause can reassign contracts to another party. They can commonly be seen in contracts related to ...
Consent to assignment refers to allowing a party of a contract (the assignor) to assign a contract and move the obligations to another party (the assignee).
3. FieldPoint's Consent to Assignment. FieldPoint hereby consents to this assignment by Assignor to Assignee as provided in this Agreement. Such consent is expressly conditioned upon Assignee's acknowledgment and agreement that neither this consent nor anything contained in this Agreement shall be deemed to modify, alter, amend, or waive any provisions of the Agreement.
Assignments. No Party shall assign this Agreement or any part hereof without the prior written consent of the other Parties. Subject to the foregoing, this Agreement shall be binding upon and inure to the benefit of the Parties and their respective permitted successors and assigns. Any attempted assignment in violation of the terms of this ...
Consent to Assignment. Under the terms and conditions set forth in this Consent, SDG&E hereby consents to (i) the assignment by the Assignor of all its right, title and interest in, to and under the Assigned Agreement to the Assignee, as collateral security for the obligations as and to the extent provided in the Security Agreement, and (ii ...
Anti-Assignment Clauses If you're making a contract and you don't want assignment to be an option, you need to clearly state that in your agreement. Below are three variations of anti-assignment clauses that can be used in a contract. EXAMPLE 1: Consent Required for Assignment Assignment.
An assignment of contract is a legal term that describes the process when a contract assignee wishes to transfer their contractual obligations to another.
A generic form of request for consent to the assignment of a commercial contract, which can be used by a party that is assigning its rights or delegating its performance obligations under the contract, or both, to a third party, if the non-transferring party's consent is required. This Standard Document has integrated notes with important explanations and drafting tips.
Master assignment in contract law with our ultimate checklist, covering key differences, legal requirements, and how to execute effectively.
Assignment consent requirements Model language [Party name] may not assign this Agreement to any other person without the express prior written consent of the other party or its successor in interest, as applicable, except as expressly provided otherwise in this Agreement. A putative assignment made without such required consent will have no ...
The best approach when you're assigning a contract is to make a written assignment agreement with the assignee. A lawyer can help you draft an agreement tailored to your circumstances, with language that clearly spells out your rights and obligations and the rights and obligations of the assignee. That way, you are less likely to be left ...
Assignment. Neither this Agreement nor any rights, duties or obligations described herein shall be assigned by either party hereto without the prior written consent of the other party. Sample 1 Sample 2 Sample 3 See All ( 2k) Assignment. The Contractor will not sell, assign, or transfer any of its rights, duties, or obligations under the ...
The Agreement contains important information such as the identities of all parties to the Agreement, the expiration date (if any) of the original contract, whether the original contract requires the Obligor's consent before assigning rights and, if so, the form of consent that the Assignor obtained and when, and which state's laws will govern ...
The assignment of contract rights happens when one party assigns the obligations and rights of their part of a legal agreement to a different party.
The proper interpretation of the contract containing the assignment clause is of critical importance in determining whether consent to an assignment has been unreasonably withheld.
Sample Clauses. Written Consent to Assignment. No Party shall directly or indirectly assign, convey, transfer, encumber or otherwise dispose of all or any portion of its interest in, or its rights and obligations under, this Agreement without the prior written consent of the other Parties. Notwithstanding the foregoing, any Party may assign or ...
The "Contractor's Consent to Assignment" or "Contractor's Consent" is a common form requested at the start of a commercial construction project and required by the lender. Many times, owners will wait until the prime contract is signed to present contractors with this document, which they present as a matter of housekeeping.
An assignment of rights and obligations under a contract occurs when a party assigns their contractual rights to a third party.
Like assignment, novation transfers the benefits under a contract but unlike assignment, novation transfers the burden under a contract as well. In a novation the original contract is extinguished and is replaced by a new one in which a third party takes up rights and obligations which duplicate those of one of the original parties to the ...
An assignment of contract occurs when one party to an existing contract (the "assignor") hands off the contract's obligations and benefits to another party (the "assignee"). Ideally, the assignor wants the assignee to step into their shoes and assume all of their contractual obligations and rights. In order to do that, the other party to the ...
Assignment of Rights. I agree to assign, and do hereby irrevocably transfer and assign, to the Company: (i) all of my rights, title and interests in and with respect to any Assigned Inventions; (ii) all patents, patent applications, copyrights, mask works, rights in databases, trade secrets, and other intellectual property rights, worldwide, in ...
Assignment and change of control terms cover different topics. One addresses rights to transfer the contract, the other rights to terminate.
A generic form of request for consent to the assignment of a commercial contract, which can be used by a party that is assigning its rights or delegating its performance obligations under the contract, or both, to a third party, if the non-transferring party's consent is required. This Standard Document has integrated notes with important explanations and drafting tips.