how to write a masters thesis abstract

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 22 July 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

Scholars often write abstracts for various applications: conference presentations may require an abstract or other short summary for a program; journal articles almost always require abstracts; invited talks and lectures are often advertised using an abstract. While the application may necessarily change the length of the abstract (a conference program may only allow for 50-75 words, for instance), the purpose and structure remains fairly constant.

Abstracts are generally kept brief (approximately 150-200 words). They differ by field, but in general, they need to summarize the article so that readers can decide if it is relevant to their work. The typical abstract includes these elements:

• A statement of the problem and objectives
• A statement of the significance of the work
• A summary of employed methods or your research approach
• A summary of findings or conclusions of the study
• A description of the implications of the findings

Regardless of field, abstract authors should explain the purpose of the work, methods used, the results and the conclusions that can be drawn. However, each field purports slightly different ways to structure the abstract. A reliable strategy is to write the abstract as a condensed version of your article, with 1-2 sentences summarizing each major section. This means that in many of the sciences and a large portion of the humanities, abstracts follow a version of the IMRAD structure: Introduction, Methods, Results, and Discussion.

Most scientific journals require authors to submit such abstracts. It is generally advisable to write the abstract in the English language. That is because most papers in other languages, especially Asian nations, tend to publish an English abstract with common search engines, such as, the MLA site.

Example Abstract

This example abstract follows the IMRAD structure closely. The first two sentences are the introduction and background information. Sentences 3-5 describe the methods used in the study. Sentence 6 summarizes the results, while the last two sentences summarize the discussion and conclusion of the study; they also indicate the significance of the results.

Usability and User-Centered Theory for 21 st Century OWLs — by Dana Lynn Driscoll, H. Allen Brizee, Michael Salvo, and Morgan Sousa from The Handbook of Research on Virtual Workplaces and the New Nature of Business Practices . Eds. Kirk St. Amant and Pavel Zemlansky. Hershey, PA: Idea Group Publishing, 2008.

This article describes results of usability research conducted on the Purdue Online Writing Lab (OWL). The Purdue OWL is an information-rich educational website that provides free writing resources to users worldwide. Researchers conducted two generations of usability tests. In the first test, participants were asked to navigate the OWL and answer questions. Results of the first test and user-centered scholarship indicated that a more user-centered focus would improve usability. The second test asked participants to answer writing-related questions using both the OWL website and a user-centered OWL prototype. Participants took significantly less time to find information using the prototype and reported a more positive response to the user-centered prototype than the original OWL. Researchers conclude that a user-centered website is more effective and can be a model for information-rich online resources. Researchers also conclude that usability research can be a productive source of ideas, underscoring the need for participatory invention.

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 419 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings . In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• FindAMasters
• Researching and Writing a Masters Dissertation

Written by Mark Bennett

All Masters programmes include some form of extended individual project. Research-focussed programmes, such as an MRes , may include multiple independent research components. Taught courses usually culminate with a substantial research task, referred to as the Masters dissertation or thesis.

This article talks about how long a Masters dissertation is and the structure it follows.Before you get started on your dissertation, you'll usually need to write a proposal. Read our full guide to Masters dissertation proposals for more information on what this should include!

On this page

What’s the difference between a masters dissertation and an undergraduate dissertation.

The Masters thesis is a bridge between undergraduate study and higher level postgraduate degrees such as the PhD .

A postgraduate dissertation may not look that different to its undergraduate equivalent. You’ll likely have to produce a longer piece of work but the foundations remain the same.

After all, one of the purposes of an undergraduate dissertation or final year project is to prepare you for more in-depth research work as a postgraduate. That said, there are some important differences between the two levels.

So, how long is a Masters dissertation? A Masters dissertation will be longer than the undergraduate equivalent – usually it’ll be somewhere between 15,000 and 20,000 words, but this can vary widely between courses, institutions and countries.

To answer your overall research question comprehensively, you’ll be expected to identify and examine specific areas of your topic. This can be like producing a series of shorter pieces of work, similar to those required by individual modules. However, there’s the additional requirement that they collectively support a broader set of conclusions.

This more involved Masters dissertation structure will:

• Give you the scope to investigate your subject in greater detail than is possible at undergraduate level
• Challenge you to be effective at organising your work so that its individual components function as stages in a coherent and persuasive overall argument
• Allow you to develop and hone a suitable research methodology (for example, choosing between qualitative and quantitative methods)

If the individual topics within your overall project require you to access separate sources or datasets, this may also have an impact on your research process.

As a postgraduate, you’ll be expected to establish and assert your own critical voice as a member of the academic community associated with your field .

During your Masters thesis you’ll need to show that you are not just capable of analysing and critiquing original data or primary source material. You should also demonstrate awareness of the existing body of scholarship relating to your topic .

So, if you’ll excuse the pun, a ‘Masters’ degree really is about achieving ‘mastery’ of your particular specialism and the dissertation is where you’ll demonstrate this: showing off the scholarly expertise and research skills that you’ve developed across your programme.

What’s the difference between a dissertation and a thesis?

A dissertation is a long piece of (usually) written work on the same topic. A thesis is a little more specific: it usually means something that presents an original argument based on the interpretation of data, statistics or content.

So, a thesis is almost always presented as a dissertation, but not all dissertations present a thesis.

Masters dissertation structure

As you can probably imagine, no two dissertations follow the exact same structure, especially given the differences found between Masters programmes from university to university and country to country .

That said, there are several key components that make up the structure of a typical Masters dissertation

How long is a Masters dissertation?

Most dissertations will typically be between 15,000 and 20,000 words long, although this can vary significantly depending on the nature of the programme.

You should also check with your university exactly which sections of the dissertation count towards the final word count (the abstract, bibliography and appendices won’t usually be included in the total).

Usually around 300 words long, the abstract is meant to be a concise summary of your dissertation. It should briefly cover the question(s) you aim to answer, your primary argument and your conclusion.

Introduction

The purpose of the introduction is to provide context for the rest of the dissertation, setting out your aims and the scope of what you want to achieve with your research. The introduction should give a clear overview of the dissertation’s chapters and will usually be around 1,000 words long.

Literature review

This part of the dissertation should examine the scholarship that has already been published in your field, presenting various arguments and counter-arguments while situating your own research within this wider body of work.

You should analyse and evaluate other publications and explain how your dissertation will contribute to the existing literature in your subject area. The literature review sometimes forms part of the introduction or follows immediately on from it. Most literature reviews are up to 1,000 words long.

Research methodology

Not all dissertations will require a section covering research methodology (Arts and Humanities dissertations won’t normally undertake the kind of research that involves a set methodology). However, if you are using a particular method to collect information for your dissertation, you should make sure to explain the rationale behind your choice of methodology. The word count for this part of the dissertation is usually around the 1,500 mark.

Those in the Arts and Humanities will usually outline their theoretical perspectives and approaches as part of the introduction, rather than requiring a detailed explanation of the methodology for their data collection and analysis.

Results / findings

If your research involves some form of survey or experiment, this is where you’ll present the results of your work. Depending on the nature of the study, this might be in the form of graphs, tables or charts – or even just a written description of what the research entailed and what the findings were.

This section forms the bulk of your dissertation and should be carefully structured using a series of related chapters (and sub-chapters). There should be a logical progression from one chapter to the next, with each part building on the arguments of its predecessor.

It can be helpful to think of your Masters dissertation as a series of closely interlinked essays, rather than one overwhelming paper. The size of this section will depend on the overall word count for your dissertation. However, to give you a rough idea for a 15,000-word dissertation, the discussion part will generally be about 12,000 words long.

Here you should draw together the threads of the previous discussion chapters and make your final concluding statements, drawing on evidence and arguments that you’ve already explored over the course of the dissertation. Explain the significance of your findings and point towards directions that future research could follow. This section of the Masters thesis will be around 1,500 words long.

References / bibliography

While planning and writing your dissertation, you should keep an extensive, organised record of any papers, sources or books you’ve quoted (or referred to). This will be a lot easier than leaving all of it until the end and struggling to work out where a particular quotation is from!

Appendices won’t be necessary in many dissertations, but you may need to include supplementary material to support your argument. This could be interview transcripts or questionnaires. If including such content within the body of the dissertation won’t be feasible – i.e. there wouldn’t be enough space or it would break the flow of your writing – you should consult with your supervisor and consider attaching it in an appendix.

It’s worth bearing in mind that these sections won’t always be discretely labelled in every dissertation. For example, everything up to ‘discussion’ might be covered in introductory chapter (rather than as distinct sections). If you’re unsure about the structure of your Masters dissertation, your supervisor will be able to help you map it out.

How does supervision work for a Masters dissertation?

As a Masters student at the dissertation stage you’ll usually be matched with an academic within your institution who will be tasked with guiding your work. This might be someone who has already taught you, or it may be another scholar whose research interests and expertise align well with what you want to do. You may be able to request a particular supervisor, but taught postgraduates are more likely to be assigned them by their department.

Specific arrangements with your supervisor will vary depending on your institution and subject area. They will usually meet with you at the beginning of the dissertation period to discuss your project and agree a suitable schedule for its undertaking. This timetable will probably set dates for:

• Subsequent discussions and progress checks
• The submission of draft chapters or sections
• Feedback appointments

Though your supervisor is there to help and advise you, it is important to remember that your dissertation is a personal research project with associated expectations of you as an independent scholar.

As a rule of thumb, you can expect your supervisor to read each part of your dissertation once at the draft stage and to offer feedback. Most will not have time to look at lots of subsequent revisions, but may respond favourably to polite requests for exceptions (provided their own workload permits it).

Inundating your supervisor with emails or multiple iterations of draft material is best avoided; they will have their own research to manage (as well as other supervision assignments) and will be able to offer better quality feedback if you stick to an agreed schedule.

How is a Masters dissertation assessed and examined?

On most courses your dissertation will be assessed by an external examiner (as well as additional members of faculty within your university who haven’t been responsible for supervising you), but these will read and critique the work you submit without personally questioning and testing you on it.

Though this examination process is not as challenging as the oral defence or ‘ viva voce ’ required for a PhD thesis, the grading of your Masters dissertation is still a fundamental component of your degree.

On some programmes the result awarded to a student’s dissertation may determine the upper grade-band that can be awarded to their degree.

Search for a Masters

Ready to start looking for your ideal postgraduate opportunity? Browse and compare Masters degrees on FindAMasters.com.

Our postgrad newsletter shares courses, funding news, stories and advice

You may also like....

Applying for a Masters can feel a bit daunting. Here is a checklist of all the things you need to do to make sure you have everything covered in your Masters application.

Postgraduate study is often very flexible, with the option to study a Masters degree or other qualification part-time, online or through blended learning.

How do Bachelors and Masters courses differ? We’ve covered the main differences you’ll encounter when making the transition from undergrad to postgrad study.

Our guide explains how online Masters degree work, what the benefits of online learning are and how to choose what to study online.

Our guide tells you everything about the application process for studying a Masters in Italy.

Our guide tells you everything about the application process for studying a Masters in the USA.

FindAMasters. Copyright 2005-2024 All rights reserved.

Unknown    ( change )

Have you got time to answer some quick questions about Masters study?

Select your nearest city

• Aberystwyth
• Beaconsfield
• Bishop Burton
• Bournemouth
• Bridlington
• Chatham Maritime
• Cirencester
• East Malling
• Hemel Hempstead
• High Wycombe
• Huddersfield
• Isle of Man
• Jordanstown
• London Central
• London East
• London South
• London West
• Londonderry
• Loughborough
• Middlesbrough
• Milton Keynes
• Musselburgh
• Northampton
• Potters Bar
• Saffron Waldon
• Scarborough
• Southampton
• St Leonards on Sea
• Stoke on Trent
• Wolverhampton

You haven’t completed your profile yet. To get the most out of FindAMasters, finish your profile and receive these benefits:

• Monthly chance to win one of ten £10 Amazon vouchers ; winners will be notified every month.*
• Access to our £6,000 scholarship competition
• Weekly newsletter with funding opportunities, application tips and much more
• Early access to our physical and virtual postgraduate study fairs

Or begin browsing FindAMasters.com

or begin browsing FindAMasters.com

*Offer only available for the duration of your active subscription, and subject to change. You MUST claim your prize within 72 hours, if not we will redraw.

Do you want hassle-free information and advice?

Create your FindAMasters account and sign up to our newsletter:

• Find out about funding opportunities and application tips
• Receive weekly advice, student stories and the latest Masters news
• Hear about our upcoming study fairs
• Save your favourite programmes, track enquiries and get personalised subject updates

Create your account

Looking to list your Masters programmes? Log in here .

Let us help you find a Masters

Never miss a course

Enter our ambassador competition

Get funding news, tips and advice

Hear about upcoming events

Sign up to our newsletter today

We've been helping students find the right postgraduate course for over a decade.

Login to your account

Enter your username below to login to your account.

/images/cornell/logo35pt_cornell_white.svg" alt="how to write a masters thesis abstract"> Cornell University --> Graduate School

Guide to writing your thesis/dissertation, definition of dissertation and thesis.

The dissertation or thesis is a scholarly treatise that substantiates a specific point of view as a result of original research that is conducted by students during their graduate study. At Cornell, the thesis is a requirement for the receipt of the M.A. and M.S. degrees and some professional master’s degrees. The dissertation is a requirement of the Ph.D. degree.

Formatting Requirement and Standards

The Graduate School sets the minimum format for your thesis or dissertation, while you, your special committee, and your advisor/chair decide upon the content and length. Grammar, punctuation, spelling, and other mechanical issues are your sole responsibility. Generally, the thesis and dissertation should conform to the standards of leading academic journals in your field. The Graduate School does not monitor the thesis or dissertation for mechanics, content, or style.

“Papers Option” Dissertation or Thesis

A “papers option” is available only to students in certain fields, which are listed on the Fields Permitting the Use of Papers Option page , or by approved petition. If you choose the papers option, your dissertation or thesis is organized as a series of relatively independent chapters or papers that you have submitted or will be submitting to journals in the field. You must be the only author or the first author of the papers to be used in the dissertation. The papers-option dissertation or thesis must meet all format and submission requirements, and a singular referencing convention must be used throughout.

ProQuest Electronic Submissions

The dissertation and thesis become permanent records of your original research, and in the case of doctoral research, the Graduate School requires publication of the dissertation and abstract in its original form. All Cornell master’s theses and doctoral dissertations require an electronic submission through ProQuest, which fills orders for paper or digital copies of the thesis and dissertation and makes a digital version available online via their subscription database, ProQuest Dissertations & Theses . For master’s theses, only the abstract is available. ProQuest provides worldwide distribution of your work from the master copy. You retain control over your dissertation and are free to grant publishing rights as you see fit. The formatting requirements contained in this guide meet all ProQuest specifications.

Copies of Dissertation and Thesis

Copies of Ph.D. dissertations and master’s theses are also uploaded in PDF format to the Cornell Library Repository, eCommons . A print copy of each master’s thesis and doctoral dissertation is submitted to Cornell University Library by ProQuest.

• How it works

How to Write an Abstract for a Dissertation

Published by Owen Ingram at August 11th, 2021 , Revised On September 20, 2023

Dissertation Abstract – Definition

The abstract is regarded as the foremost component of a dissertation. It will be your first chance to set precise expectations for the supervisor, examiner or graduate committee members. An abstract for a dissertation is the first real significant narrative of your work and is placed at the beginning of the dissertation paper.

Presented in a shortened form, an abstract is a very brief overview of your research .

In this article, we will uncover every piece of information you need to know to write an abstract.  

According to the online archives of Simon Fraser University research database, “an abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there are insufficient time and space for the full text. ”

Do I Need to Write an Abstract?

You will be required to include an abstract at the beginning of your paper if you are working on your thesis, dissertation, research paper, or publishing a paper in any academic journal.

Even though the abstract appears right at the start of a dissertation paper, it is generally written at last. For it is only after you have compiled all the evidence and data, interpreted every piece of finding, backed your interpretation(s) with enough theoretical evidence and answered your research questions, that you can sum it all up in 150-200 words. The general length of an abstract.

 The table of contents is the section that immediately follows an abstract. Here is a guide on how to create a table of contents for the dissertation .

Your abstract should be an  entirely autonomous and independent text and never be an extract taken from within the paper’s original content. This also implies, indirectly, that it is unethical in research contexts to copy-paste chunks from within your own research in an abstract.

In particular, an abstract aims to provide an overview of research aim and objectives, methods of research employed, results obtained, findings, most salient interpretation(s), the conclusion and implication(s) of your research. Readers should be able to completely understand all aspects of your research work just by reading your abstract.

Also Read : How to Write Dissertation Discussion Chapter , How to Write a Remarkable Dissertation?

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

• Expert UK Writers
• Plagiarism-free
• Timely Delivery
• Thorough Research
• Rigorous Quality Control

Now you can pay in up to 4 installments

How to Write a Dissertation Abstract

A dissertation abstract serves as a deal maker or breaker when it comes to making a strong impression on your readers. Your dissertation abstract can either motivate your readers to continue reading or discourage them from  moving on to the next chapters .

The abstract of a dissertation needs to be conspicuous, meaningful, interesting and of course, informative. It should contain brief but relevant information from all chapters of your dissertation to provide a brief overview of the research that has been conducted. This would mean its:

• What (topic statement of your research)
• Who (the sample)
• Why (the significance/objectives/aims/questions/hypothesis of your research)
• Where (the background/setting of your research)
• And how (the research design/tools/methods/methodologies etc. of your research)

 Here, we have put together some guidelines for students to understand how to write an abstract for a dissertation to make a great first impression on readers.

Key Components of a Dissertation Abstract

The  key elements of a dissertation abstract are as follows:

• Background statement/problem statement/thesis statement
• Information regarding research sample
• Methods of research employed
• A brief description of the results obtained and their interpretation (only the most important one(s))
• A summary of conclusion, limitations and future recommendations/implications (only the most salient ones)

1. Background/Problem Statement/Aims and Objectives

The first couple of sentences of your dissertation abstract should provide a summary of the purpose of your research. This can be expressed as follows:

• Background statement – Provide a brief perspective on the theoretical and practical significance of your work.
• The problem statement clearly communicates to the readers why there was a need to research the chosen topic.
• Present an overview of the research’s aim and objectives to establish what your research intended to achieve.
• Thesis statement – what is the main idea of your dissertation paper? What are your claims in reference to the established research questions?

Avoid writing this part of the abstract in future tense because it refers to concluded actions.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Also read: How to Get Dissertation Deadline Extension – Some Practical Methods.

This one-to-two lined section will give information about who the sample in your study was; where they are located/residing, etc. The reasons for selecting that group of participants, for instance, is not relevant for mention in an abstract.

3. Research Methods

Briefly specify your  dissertation research methodology immediately after stating the purpose and sample of your dissertation paper. Here, you will be expected to summarise how you straightforwardly conducted your research.

Like the first section, a description of research  methods should also be written in the simple past tense. There is absolutely  no need to highlight the limitations and/or validity  of your research methods here.

The goal is to take the readers through the overall approach and process quickly.

4. Research Findings

Provide a brief overview of the major  findings of your dissertation study . If you think you undiscovered multiple major findings, only mention the ones that directly answer a research question or two that was/were part of your study to begin with. For instance, if you studied the relation between two variables and your findings indicate it’s a positive correlation, you simply state that finding, not the other, minor ones related to this specific one.

This section is the crux of your abstract, so make sure you demonstrate how your research addressed the research objectives.

Furthermore, due to the word limit (150-200) of the abstract and the complexity of your research, you might not be able to include all results here. If that is the case, have only the most significant results.

This portion should be written in the past simple or present tense. Here is an example:

• Analysis of the responses has shown that there is a strong correlation between consumption and productivity.
• Analysis of the responses shows there is a strong correlation between coffee consumption and productivity.
• Analysis of the responses showed there was a strong correlation between coffee consumption and productivity.

5. Conclusion and Recommendation/Implication

Lastly, the  abstract of a dissertation  should  conclude your dissertation research . The conclusion should clearly report how your study addressed the research problem.

Use this part of the abstract to convince people how your research proved the argument or theory your research was built on and started off with.

Provide recommendations for practical implementation to clearly understand your audience how your work will solve the problem at hand.

Finally, do not forget to mention important research limitations briefly. For example, selecting a smaller sample size due to some constraints would be a limitation worth mentioning. This will add more weight and credibility to your research.

Make use of the present simple test when writing the conclusion.

Some institutions, however, dictate that you write one or two lines about the long- or short-term implications your research might have. This component would be the last one in an abstract, preceded by the conclusive statement.

Abstract keywords/phrases 

You might be asked to include important key terms and phrases at the end of the abstract, especially if your paper has been selected for publication in an academic journal.

These keywords help potential readers find your paper in search engines during their  desk-based research .

However, it should be noted that some academic journals have their own specific formatting requirements for keywords. It’s recommended that you read the requirements about keywords in their publication manuals to avoid any misunderstanding.

More on Abstract keywords

According to Hartley and Kostoff (2003), following are some different methods for supplying keywords for an abstract:

Researchers “supply them with no restrictions on the numbers allowed; supply up to a fixed number (e.g. six); supply key words as appropriate from a specified list; editors supplement/amend authors’ key words; editors supply key words; editors supply key words from a specified list; referees supply key words from a specified list; keywords are allocated according to the ‘house-rules’ applied to all journals; distributed by a specific publisher; keywords are determined by computer program at proof stage”.

Format of a Dissertation Abstract

The typical size of an abstract for a masters’ dissertation is 300-400 words whereas abstracts for undergraduate dissertation papers are 150-200 words in size.

Since their findings are generally more in number, abstracts for PhD-level dissertation papers are assigned 300-350 words. The dissertation abstract structure should be such that there are one or two sentences assigned to each chapter of the dissertation.

For example, if your dissertation paper has 5 chapters, there should be a minimum of 8-10 sentences in the abstract to provide a reflective summary of each chapter’s information.

As is the case  with the dissertation introduction chapter , you will be expected to specify the research questions clearly.

You might need to rearrange them and/or reduce the word count without missing out on any important element, considering there is room for only two to three research questions generally placed at the beginning of the abstract.

  Poor dissertation abstracts don’t present the findings of the research. It is important to recognize that the readers of your dissertation paper will be more interested in what findings you came up with as a result of your research and not merely what you did. Use at least 2 to 3 sentences for summarising the results and their interpretation.

Look for the formatting requirements in your dissertation handbook or writing guidelines provided by your school. Make sure to stay within the permissible word limit.  An abstract too long or too short will not serve the purpose.

Tips on How to Write the Abstract for Dissertation

Condensing your entire dissertation into just a few sentences can be a daunting task, especially if it’s your first time writing a dissertation abstract.

It is important to get your dissertation abstract right because this part of the dissertation paper is the first real piece of written description that your audience will read. You can even recall some of your own experiences where, due to shortage of time or many deadlines looming above your head, you had to skim and scam the abstract of a research article or journal paper you stumbled across. It probably gave you a good enough idea whether it was worth it to bookmark that paper to read fully later now, didn’t it?

That’s exactly the kind of effect your own abstract should have on its readers, too. It’s meant to give a holistic view of the entire research.

Here are some tips for you to make sure you write this part to the highest possible academic quality:

Also Read: Different Research Methods for Dissertation?

Tip #1: Avoid Citing Publications

Student researchers often get carried away with the research of professional researchers when writing an abstract. Avoid focusing on others’ work and demonstrate how your own research will substantially contribute to your area of study.

Depending on the allowable word limit for the abstract, you might be able to squeeze in a sentence or two about the scholarly background of the research problem you wish to address. Still, there is no need to cite any publications.

Tip #2: Be Concise and to-the-point

Your dissertation abstract should be attention-grabbing, even though you will have only a few hundred words to work with. So. it is crucial to communicate your research work in the most concise manner.  Never stuff your dissertation abstract with needless words and avoid vague verbiage that might put your readers off-track.

 Need help with writing a killer dissertation abstract? Our writers can write an abstract for a dissertation following your school’s guidelines. Or get help from our expert academics  with any part of your dissertation.

Tip # 3: Read Sample Abstracts

Learn the art of writing great dissertation abstract by reading abstract dissertation samples. It would make sense to look at how other people in your academic subject have written their abstracts.

If you have already conducted your  dissertation literature review , you might have already read many research paper abstracts – which you could use to get useful insights into how to format your dissertation abstract. Here is an abstract dissertation example to help you get started.

Tip #4: Coverage and Presentation

Remember, an abstract is one single paragraph. There are no breaks in it. It continues as a single body. Furthermore, it is written in a separate page. No other chapter or sub-headings etc. come before or after the abstract on the same page. There are also no headings – such as the topic of your research – above the title ‘Abstract’ on the abstract page. Simply give the heading of ‘Abstract’ and start it off from there. And last but not the least, another important thing to keep in mind is that abstract (pretty much like the rest of your thesis) will be double-spaced.

Tip #5: Language

Other researchers will look for key terms specific to your research field to figure out the purpose and nature of your dissertation paper. Make sure to include relevant terminology necessary for understanding your abstract and thereby determining what the research was about.

Tip #6: Shortening a Lengthy Abstract

It’s natural to sometimes get carried away while writing…even in academic writing. As Trochim and other writers state in their book, Research Methods: The Essential Knowledge Base , “In order to shorten your abstract, you should eliminate nonessential information wherever possible—this includes transitions phrases (e.g., ‘the results demonstrate . . .’).”

Can I use an excerpt from the paper as an abstract?

No, you should not. It is important for an abstract to be an entirely autonomous and independent text and never be an extract taken from within the paper’s original content. Write it in your own words, 

What is the purpose of an abstract?

The abstract of your dissertation provides a brief overview of the research conducted and the results obtained.

What should a dissertation abstract contain?

The abstract of your dissertation must give background information, mention the problem statement , research aims , and objectives, sample information, methods of research , the findings , conclusion and recommendations/implications.

Can I cite a reference in the abstract?

No, you must never cite any reference in the abstract.

You May Also Like

A list of glossary in a dissertation contains all the terms that were used in your dissertation but the meanings of which may not be obvious to the readers.

Dissertation Methodology is the crux of dissertation project. In this article, we will provide tips for you to write an amazing dissertation methodology.

How to Structure a Dissertation or Thesis Need interesting and manageable Finance and Accounting dissertation topics? Here are the trending Media dissertation titles so you can choose one most suitable to your needs.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Subject Guides

Academic writing: a practical guide

Dissertations.

• Academic writing
• The writing process
• Academic writing style
• Structure & cohesion
• Criticality in academic writing
• Working with evidence
• Referencing
• Assessment & feedback
• Reflective writing
• Examination writing
• Academic posters
• Feedback on Structure and Organisation
• Feedback on Argument, Analysis, and Critical Thinking
• Feedback on Writing Style and Clarity
• Feedback on Referencing and Research
• Feedback on Presentation and Proofreading

Dissertations are a part of many degree programmes, completed in the final year of undergraduate studies or the final months of a taught masters-level degree. 

Introduction to dissertations

What is a dissertation.

A dissertation is usually a long-term project to produce a long-form piece of writing; think of it a little like an extended, structured assignment. In some subjects (typically the sciences), it might be called a project instead.

Work on an undergraduate dissertation is often spread out over the final year. For a masters dissertation, you'll start thinking about it early in your course and work on it throughout the year.

You might carry out your own original research, or base your dissertation on existing research literature or data sources - there are many possibilities.

What's different about a dissertation?

The main thing that sets a dissertation apart from your previous work is that it's an almost entirely independent project. You'll have some support from a supervisor, but you will spend a lot more time working on your own.

You'll also be working on your own topic that's different to your coursemate; you'll all produce a dissertation, but on different topics and, potentially, in very different ways.

Dissertations are also longer than a regular assignment, both in word count and the time that they take to complete. You'll usually have  most of an academic year to work on one, and be required to produce thousands of words; that might seem like a lot, but both time and word count will disappear very quickly once you get started! 

Find out more:

Key dissertation tools

Digital tools.

There are lots of tools, software and apps that can help you get through the dissertation process. Before you start, make sure you collect the key tools ready to:

• use your time efficiently
• organise yourself and your materials
• manage your writing
• be less stressed

Here's an overview of some useful tools:

Digital tools for your dissertation [Google Slides]

Setting up your document

Formatting and how you set up your document is also very important for a long piece of work like a dissertation, research project or thesis. Find tips and advice on our text processing guide:

University of York past Undergraduate and Masters dissertations

If you are a University of York student, you can access a selection of digitised undergraduate dissertations for certain subjects:

• History  
• History of Art  
• Social Policy and Social Work  

The Library also has digitised Masters dissertations for the following subjects:

• Archaeology
• Centre for Eighteenth-Century Studies  
• Centre for Medieval Studies  
• Centre for Renaissance and Early Modern Studies  
• Centre for Women's Studies  
• English and Related Literature
• Health Sciences
• History of Art
• Hull York Medical School
• Language and Linguistic Science
• School for Business and Society
• School of Social and Political Sciences ​​​​​​​

Dissertation top tips

Many dissertations are structured into four key sections:

• introduction & literature review

There are many different types of dissertation, which don't all use this structure, so make sure you check your dissertation guidance. However, elements of these sections are common in all dissertation types.

Dissertations that are an extended literature review do not involve data collection, thus do not have a methods or result section. Instead they have chapters that explore concepts/theories and result in a conclusion section. Check your dissertation module handbook and all information given to see what your dissertation involves. 

Introduction & literature review

The Introduction and Literature Review give the context for your dissertation:

• What topic did you investigate?
• What do we already know about this topic?
• What are your research questions and hypotheses?

Sometimes these are two separate sections, and sometimes the Literature Review is integrated into the Introduction. Check your guidelines to find out what you need to do.

Literature Review Top Tips [YouTube]  |  Literature Review Top Tips transcript [Google Doc]

The Method section tells the reader what you did  and why.

• Include enough detail so that someone else could replicate your study.
• Visual elements can help present your method clearly. For example, summarise participant demographic data in a table or visualise the procedure in a diagram. 
• Show critical analysis by justifying your choices. For example, why is your test/questionnaire/equipment appropriate for this study?
• If your study requires ethical approval, include these details in this section.

Methodology Top Tips [YouTube]  |  Methodology Top Tips transcript [Google Doc]

More resources to help you plan and write the methodology:

The Results tells us what you found out . 

It's an objective presentation of your research findings. Don’t explain the results in detail here - you’ll do that in the discussion section.

Results Top Tips [YouTube]  |  Results Top Tips transcript [Google Doc]

The Discussion is where you explain and interpret your results - what do your findings mean?

This section involves a lot of critical analysis. You're not just presenting your findings, but putting them together with findings from other research to build your argument about what the findings mean.

Discussion Top Tips [YouTube]  |  Discussion Top Tips transcript [Google Doc]

Conclusions are a part of many dissertations and/or research projects. Check your module information to see if you are required to write one. Some dissertations/projects have concluding remarks in their discussion section. See the slides below for more information on writing conclusions in dissertations.

Conclusions in dissertations [Google Slides]

The abstract is a short summary of the whole dissertation that goes at the start of the document. It gives an overview of your research and helps readers decide if it’s relevant to their needs.

Even though it appears at the start of the document, write the abstract last. It summarises the whole dissertation, so you need to finish the main body before you can summarise it in the abstract.

Usually the abstract follows a very similar structure to the dissertation, with one or two sentences each to show the aims, methods, key results and conclusions drawn. Some subjects use headings within the abstract. Even if you don’t use these in your final abstract, headings can help you to plan a clear structure.

Abstract Top Tips [YouTube]  |  Abstract Top Tips transcript [Google Doc]

Watch all of our Dissertation Top Tips videos in one handy playlist:

Research reports, that are often found in science subjects, follow the same structure, so the tips in this tutorial also apply to dissertations:

Other support for dissertation writing

Online resources.

The general writing pages of this site offer guidance that can be applied to all types of writing, including dissertations. Also check your department guidance and VLE sites for tailored resources.

Other useful resources for dissertation writing:

Appointments and workshops 

There is a lot of support available in departments for dissertation production, which includes your dissertation supervisor, academic supervisor and, when appropriate, staff teaching in the research methods modules.

You can also access central writing and skills support:

• << Previous: Reports
• Next: Reflective writing >>
• Last Updated: Jul 1, 2024 6:09 PM
• URL: https://subjectguides.york.ac.uk/academic-writing

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

What is a dissertation abstract and how do I write one for my PhD?

Feb 12, 2019

There are a lot of posts that talk about how to write an abstract. Most say that you should write your abstract to impress your examiner.

We say that you need to flip things upside down: sure, your examiner will read it and want to see that you’ve written it well, but you should actually have your next boss in mind when you write it.

When you apply for your first academic job, the abstract may be the only part of your thesis that your new boss will read. They may not have the time or energy to read the whole thesis, so the abstract plays a crucial role. You should write it as if you academic career depends on it.

In this guide we talk about how to write an outstanding abstract that will (hopefully) land you a job.

If you haven’t already, make sure you download our PhD Writing Template , which you can use in conjunction with this guide to supercharge your PhD.

What is an abstract?

  This is fairly straightforward stuff, but let us be clear so we are all on the same page.

An abstract is a short summary at the beginning of the PhD that sums up the research, summarises the separate sections of the thesis and outlines the contribution.

It is typically used by those wishing to get a broad understanding of a piece of research prior to reading the entire thesis.

When you apply for your first academic job, the hiring manager will take a look through applicants’ abstracts (as well as your CV and covering letter) to create a shortlist. If you are lucky enough to do well at an interview, your potential new boss will take another look through it before deciding whether to offer you the job.

Why don’t they read the whole thing? Apart from the fact that they’re way too busy to read 200+ pages, a well written abstract actually contains all they need to know. It is a way of letting them see what your research is about, what contribution it makes, what your understanding of the field is and how or whether you will fit into the department.

So, you need to write it well.

But, don’t underestimate how hard it is to write a PhD thesis abstract. You have to condense hundred of pages and years of work into a few hundred words (exactly how many will depend on your university, so double check with them before you start writing).

How do I write a good PhD abstract?

Some blog posts use keywords to summarise the content (this one does, scroll down to see them). The abstract is similar. It’s an extended set of keywords to summarise a complex piece of research.

Above all, your PhD abstract should answer the question: ‘so what’ ? In other words, what is the contribution of your thesis to the field?

If you’ve been using our PhD writing template you’ll know that, to do this, your abstract should address six questions:

• What is the reason for writing the thesis?
• What are the current approaches and gaps in the literature?
• What are your research question(s) and aims?
• Which methodology have you used?
• What are the main findings?
• What are the main conclusions and implications?

One thing that should be obvious is that you can’t write your abstract until the study itself has been written. It’ll typically be the last thing you write (alongside the acknowledgements).

But how can I write a great one?

  The tricky thing about writing a great PhD abstract is that you haven’t got much space to answer the six questions above. There are a few things to consider though that will help to elevate your writing and make your abstract as efficient as possible:

• Give a good first impression by writing in short clear sentences
• Don’t repeat the title in the abstract
• Don’t cite references
• Use keywords from the document
• Respect the word limit
• Don’t be vague – the abstract should be a self contained summary of the research, so don’t introduce ambiguous words or complex terms
• Focus on just four or five essential points, concepts, or findings. Don’t, for example, try to explain your entire theoretical framework
• Edit it carefully. Make sure every word is relevant (you haven’t got room for wasted words) and that each sentence has maximum impact
• Avoid lengthy background information
• Don’t mention anything that isn’t discussed in the thesis
• Avoid overstatements
• Don’t spin your findings, contribution or significance to make your research sound grander or more influential that it actually is

Examples of a good and bad abstract

We can see that the bad abstract fails to answer the six questions posed above. It reads more like a PhD proposal, rather than a summary of a piece of research.

Specifically:

• It doesn’t discuss the reason why the thesis was written
• It doesn’t outline the gaps in the literature
• It doesn’t outline the research questions or aims
• It doesn’t discuss the methods
• It doesn’t discuss the findings
• It doesn’t discuss the conclusions and implications of the research.

It is also too short, lacks adequate keywords and introduces unnecessary detail. The abbreviations and references only serve to confuse the reader and the claim that the thesis will ‘develop a new theory of climate change’ is both vague and over-ambitious. The reader will see through this.

The good abstract though does a much better job at answering the six questions and summarising the research.

• The reason why the thesis was written is stated: ‘We do so to better enable policy makers and academics to understand the nuances of multi-level climate governance’ and….’it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’
• The gap is clearly defined: ‘The theory has neglected to account for the role of local governments.’
• The research question are laid out: ‘We ask to what extent and in what ways local governments in the UK’…
• The methods are hinted at: ‘Using a case study…’
• The findings are summarised: ‘We show that local governments are both implementers and interpreters of policy. We also show that they make innovative contributions to and influence the direction of national policy.’
• The conclusions and implications are clear: ‘The significance of this study is that it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’

This abstract is of a much better length, and it fully summarises what the thesis is about. We can see that if someone (i.e. your hiring manager) were to read just this abstract, they’d understand what your thesis is about and the contribution that it makes.

Your PhD thesis. All on one page. 

Use our free PhD structure template to quickly visualise every element of your thesis. 

I can’t summarise my thesis, what do I do?

  We suggest you fill out our PhD Writing Template . We’ve designed it so that you can visualise your PhD on one page and easily see the main components. It’s really easy to use. It asks you a few questions related to each section of your thesis. As you answer them, you develop a synopsis. You can use that synopsis to inform your abstract. If you haven’t downloaded it, you can find it here.

  Like everything related to writing, it takes practice before you get great at writing abstracts. Follow our tips and you’ll have a head start over others.

Remember, you’re not writing your abstract for anyone other than your hiring manager. Make sure it showcases the best of your research and shows your skills as both a researcher and a writer.

If you’re struggling, send us your abstract by email and we’ll have give you free advice on how to improve it.

Hello, Doctor…

Sounds good, doesn’t it?  Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back. 

Share this:

Hello! I am a first year PhD student and I am interested in your Thesis writing course. However, I don’t have Paypal, thus I would like to know if there is an alternative way for you to get paid. I hope so, because I have been “following” you and I think the course can be really useful for me :) Hope to hear from you soon. Best wishes, Belén Merelas

Thanks for the comment – I have sent you an email.

Hello! I am a Master’s student and I have applied for a PhD position. The professors have asked me to write a short abstract-like text, based on a brief sentence they will send me, related to the project study. How am I supposed to write a text like that when I don’t have the whole paper, the methods, results etc? Thank you in advance!

Hi Maria. I’m afraid that without knowing more about your topic or subject I am unable to give you advice on this. Sorry I can’t help in the way you may have hoped.

Thank u so much… your tips have really helped me to broaden my scope on the idea of how to write an abstract for my Ph.D. course. This is so thoughtful of you… The article is very informative and helpful…Thanks again!

I’m so pleased. Thanks for your lovely words. They’re music to my ears.

Very insightful Thanks

Glad you think so. Good luck with the writing.

Thank you so much Doc

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

The PhD Knowledge Base Categories

• Your PhD and Covid
• Mastering your theory and literature review chapters
• How to structure and write every chapter of the PhD
• How to stay motivated and productive
• Techniques to improve your writing and fluency
• Advice on maintaining good mental health
• Resources designed for non-native English speakers
• PhD Writing Template
• Explore our back-catalogue of motivational advice

• Home »

find your perfect postgrad program Search our Database of 30,000 Courses

How to write a masters dissertation or thesis: top tips.

It is completely normal to find the idea of writing a masters thesis or dissertation slightly daunting, even for students who have written one before at undergraduate level. Though, don’t feel put off by the idea. You’ll have plenty of time to complete it, and plenty of support from your supervisor and peers.

One of the main challenges that students face is putting their ideas and findings into words. Writing is a skill in itself, but with the right advice, you’ll find it much easier to get into the flow of writing your masters thesis or dissertation.

We’ve put together a step-by-step guide on how to write a dissertation or thesis for your masters degree, with top tips to consider at each stage in the process.

1. Understand your dissertation or thesis topic

There are slight differences between theses and dissertations , although both require a high standard of writing skill and knowledge in your topic. They are also formatted very similarly.

At first, writing a masters thesis can feel like running a 100m race – the course feels very quick and like there is not as much time for thinking! However, you’ll usually have a summer semester dedicated to completing your dissertation – giving plenty of time and space to write a strong academic piece.

By comparison, writing a PhD thesis can feel like running a marathon, working on the same topic for 3-4 years can be laborious. But in many ways, the approach to both of these tasks is quite similar.

Before writing your masters dissertation, get to know your research topic inside out. Not only will understanding your topic help you conduct better research, it will also help you write better dissertation content.

Also consider the main purpose of your dissertation. You are writing to put forward a theory or unique research angle – so make your purpose clear in your writing.

Top writing tip: when researching your topic, look out for specific terms and writing patterns used by other academics. It is likely that there will be a lot of jargon and important themes across research papers in your chosen dissertation topic. 

2. Structure your dissertation or thesis

Writing a thesis is a unique experience and there is no general consensus on what the best way to structure it is. 

As a postgraduate student , you’ll probably decide what kind of structure suits your research project best after consultation with your supervisor. You’ll also have a chance to look at previous masters students’ theses in your university library.

To some extent, all postgraduate dissertations are unique. Though they almost always consist of chapters. The number of chapters you cover will vary depending on the research. 

A masters dissertation or thesis organised into chapters would typically look like this: 

Write down your structure and use these as headings that you’ll write for later on.

Top writing tip : ease each chapter together with a paragraph that links the end of a chapter to the start of a new chapter. For example, you could say something along the lines of “in the next section, these findings are evaluated in more detail”. This makes it easier for the reader to understand each chapter and helps your writing flow better.

3. Write up your literature review

One of the best places to start when writing your masters dissertation is with the literature review. This involves researching and evaluating existing academic literature in order to identify any gaps for your own research.

Many students prefer to write the literature review chapter first, as this is where several of the underpinning theories and concepts exist. This section helps set the stage for the rest of your dissertation, and will help inform the writing of your other dissertation chapters.

What to include in your literature review

The literature review chapter is more than just a summary of existing research, it is an evaluation of how this research has informed your own unique research.

Demonstrate how the different pieces of research fit together. Are there overlapping theories? Are there disagreements between researchers?

Highlight the gap in the research. This is key, as a dissertation is mostly about developing your own unique research. Is there an unexplored avenue of research? Has existing research failed to disprove a particular theory?

Back up your methodology. Demonstrate why your methodology is appropriate by discussing where it has been used successfully in other research.

4. Write up your research

For instance, a more theoretical-based research topic might encompass more writing from a philosophical perspective. Qualitative data might require a lot more evaluation and discussion than quantitative research. 

Methodology chapter

The methodology chapter is all about how you carried out your research and which specific techniques you used to gather data. You should write about broader methodological approaches (e.g. qualitative, quantitative and mixed methods), and then go into more detail about your chosen data collection strategy. 

Data collection strategies include things like interviews, questionnaires, surveys, content analyses, discourse analyses and many more.

Data analysis and findings chapters

The data analysis or findings chapter should cover what you actually discovered during your research project. It should be detailed, specific and objective (don’t worry, you’ll have time for evaluation later on in your dissertation)

Write up your findings in a way that is easy to understand. For example, if you have a lot of numerical data, this could be easier to digest in tables.

This will make it easier for you to dive into some deeper analysis in later chapters. Remember, the reader will refer back to your data analysis section to cross-reference your later evaluations against your actual findings – so presenting your data in a simple manner is beneficial.

Think about how you can segment your data into categories. For instance, it can be useful to segment interview transcripts by interviewee. 

Top writing tip : write up notes on how you might phrase a certain part of the research. This will help bring the best out of your writing. There is nothing worse than when you think of the perfect way to phrase something and then you completely forget it.

5. Discuss and evaluate

Once you’ve presented your findings, it’s time to evaluate and discuss them.

It might feel difficult to differentiate between your findings and discussion sections, because you are essentially talking about the same data. The easiest way to remember the difference is that your findings simply present the data, whereas your discussion tells the story of this data.

Your evaluation breaks the story down, explaining the key findings, what went well and what didn’t go so well.

In your discussion chapter, you’ll have chance to expand on the results from your findings section. For example, explain what certain numbers mean and draw relationships between different pieces of data.

Top writing tip: don’t be afraid to point out the shortcomings of your research. You will receive higher marks for writing objectively. For example, if you didn’t receive as many interview responses as expected, evaluate how this has impacted your research and findings. Don’t let your ego get in the way!

6. Write your introduction

Your introduction sets the scene for the rest of your masters dissertation. You might be wondering why writing an introduction isn't at the start of our step-by-step list, and that’s because many students write this chapter last.

Here’s what your introduction chapter should cover:

Problem statement

Research question

Significance of your research

This tells the reader what you’ll be researching as well as its importance. You’ll have a good idea of what to include here from your original dissertation proposal , though it’s fairly common for research to change once it gets started.

Writing or at least revisiting this section last can be really helpful, since you’ll have a more well-rounded view of what your research actually covers once it has been completed and written up.

Masters dissertation writing tips

When to start writing your thesis or dissertation.

When you should start writing your masters thesis or dissertation depends on the scope of the research project and the duration of your course. In some cases, your research project may be relatively short and you may not be able to write much of your thesis before completing the project. 

But regardless of the nature of your research project and of the scope of your course, you should start writing your thesis or at least some of its sections as early as possible, and there are a number of good reasons for this:

Academic writing is about practice, not talent. The first steps of writing your dissertation will help you get into the swing of your project. Write early to help you prepare in good time.

Write things as you do them. This is a good way to keep your dissertation full of fresh ideas and ensure that you don’t forget valuable information.

The first draft is never perfect. Give yourself time to edit and improve your dissertation. It’s likely that you’ll need to make at least one or two more drafts before your final submission.

Writing early on will help you stay motivated when writing all subsequent drafts.

Thinking and writing are very connected. As you write, new ideas and concepts will come to mind. So writing early on is a great way to generate new ideas.

How to improve your writing skills

The best way of improving your dissertation or thesis writing skills is to:

 Finish the first draft of your masters thesis as early as possible and send it to your supervisor for revision. Your supervisor will correct your draft and point out any writing errors. This process will be repeated a few times which will help you recognise and correct writing mistakes yourself as time progresses.

If you are not a native English speaker, it may be useful to ask your English friends to read a part of your thesis and warn you about any recurring writing mistakes. Read our section on English language support for more advice. 

Most universities have writing centres that offer writing courses and other kinds of support for postgraduate students. Attending these courses may help you improve your writing and meet other postgraduate students with whom you will be able to discuss what constitutes a well-written thesis.

Read academic articles and search for writing resources on the internet. This will help you adopt an academic writing style, which will eventually become effortless with practice.

Keep track of your bibliography 

The easiest way to keep the track of all the articles you have read for your research is to create a database where you can summarise each article/chapter into a few most important bullet points to help you remember their content. 

Another useful tool for doing this effectively is to learn how to use specific reference management software (RMS) such as EndNote. RMS is relatively simple to use and saves a lot of time when it comes to organising your bibliography. This may come in very handy, especially if your reference section is suspiciously missing two hours before you need to submit your dissertation! 

Avoid accidental plagiarism

Plagiarism may cost you your postgraduate degree and it is important that you consciously avoid it when writing your thesis or dissertation. 

Occasionally, postgraduate students commit plagiarism unintentionally. This can happen when sections are copy and pasted from journal articles they are citing instead of simply rephrasing them. Whenever you are presenting information from another academic source, make sure you reference the source and avoid writing the statement exactly as it is written in the original paper.

What kind of format should your thesis have?

Read your university’s guidelines before you actually start writing your thesis so you don’t have to waste time changing the format further down the line. However in general, most universities will require you to use 1.5-2 line spacing, font size 12 for text, and to print your thesis on A4 paper. These formatting guidelines may not necessarily result in the most aesthetically appealing thesis, however beauty is not always practical, and a nice looking thesis can be a more tiring reading experience for your postgrad examiner .

When should I submit my thesis?

The length of time it takes to complete your MSc or MA thesis will vary from student to student. This is because people work at different speeds, projects vary in difficulty, and some projects encounter more problems than others. 

Obviously, you should submit your MSc thesis or MA thesis when it is finished! Every university will say in its regulations that it is the student who must decide when it is ready to submit. 

However, your supervisor will advise you whether your work is ready and you should take their advice on this. If your supervisor says that your work is not ready, then it is probably unwise to submit it. Usually your supervisor will read your final thesis or dissertation draft and will let you know what’s required before submitting your final draft.

Set yourself a target for completion. This will help you stay on track and avoid falling behind. You may also only have funding for the year, so it is important to ensure you submit your dissertation before the deadline – and also ensure you don’t miss out on your graduation ceremony ! 

To set your target date, work backwards from the final completion and submission date, and aim to have your final draft completed at least three months before that final date.

Don’t leave your submission until the last minute – submit your work in good time before the final deadline. Consider what else you’ll have going on around that time. Are you moving back home? Do you have a holiday? Do you have other plans?

If you need to have finished by the end of June to be able to go to a graduation ceremony in July, then you should leave a suitable amount of time for this. You can build this into your dissertation project planning at the start of your research.

It is important to remember that handing in your thesis or dissertation is not the end of your masters program . There will be a period of time of one to three months between the time you submit and your final day. Some courses may even require a viva to discuss your research project, though this is more common at PhD level . 

If you have passed, you will need to make arrangements for the thesis to be properly bound and resubmitted, which will take a week or two. You may also have minor corrections to make to the work, which could take up to a month or so. This means that you need to allow a period of at least three months between submitting your thesis and the time when your program will be completely finished. Of course, it is also possible you may be asked after the viva to do more work on your thesis and resubmit it before the examiners will agree to award the degree – so there may be an even longer time period before you have finished.

How do I submit the MA or MSc dissertation?

Most universities will have a clear procedure for submitting a masters dissertation. Some universities require your ‘intention to submit’. This notifies them that you are ready to submit and allows the university to appoint an external examiner.

This normally has to be completed at least three months before the date on which you think you will be ready to submit.

When your MA or MSc dissertation is ready, you will have to print several copies and have them bound. The number of copies varies between universities, but the university usually requires three – one for each of the examiners and one for your supervisor.

However, you will need one more copy – for yourself! These copies must be softbound, not hardbound. The theses you see on the library shelves will be bound in an impressive hardback cover, but you can only get your work bound like this once you have passed. 

You should submit your dissertation or thesis for examination in soft paper or card covers, and your university will give you detailed guidance on how it should be bound. They will also recommend places where you can get the work done.

The next stage is to hand in your work, in the way and to the place that is indicated in your university’s regulations. All you can do then is sit and wait for the examination – but submitting your thesis is often a time of great relief and celebration!

Some universities only require a digital submission, where you upload your dissertation as a file through their online submission system.

Related articles

What Is The Difference Between A Dissertation & A Thesis

How To Get The Most Out Of Your Writing At Postgraduate Level

Dos & Don'ts Of Academic Writing

Dispelling Dissertation Drama

Writing A Dissertation Proposal

Postgrad Solutions Study Bursaries

Exclusive bursaries Open day alerts Funding advice Application tips Latest PG news

Complete Our Destination Survey

Take 2 minutes to complete our Destination Survey for the chance to win a Postgrad Study Bursary worth £2,000.

All we need to know is:

• Your university
• Your PG course

• EXPLORE Random Article
• Happiness Hub

How to Write a Dissertation Abstract

Last Updated: March 6, 2020 References

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 23,213 times.

An abstract is a small summary of a larger paper. A dissertation is a long research paper with an original argument that you must write to graduate with a Master’s degree or doctorate. An abstract helps give your reader a map of your paper before he or she reads it. It also helps researchers to know if your paper will be helpful to them before they expend time reading it. Therefore, you should try to write as clear an abstract as possible, in simple and concise language.

Including the Necessary Information

• Start with your main thesis at the top.
• Next, read each section of your paper. As you read, write a one-sentence summary of each major chapter or section. Keep them in order on your paper. Regardless of your discipline, take time to point out the key theorists in the discipline you’ll be exploring in your paper.
• Include a summary of your conclusions, as well.
• If you’re writing an abstract for a scientific dissertation, it’s not necessary to include all of your literature review; however, you might include a sentence on how your paper fits into the larger academic discussion.

• Discuss how your research fits into the larger academic discussion.
• Talk about your methodology.
• Include your conclusions.
• Take time to discuss how it could lead to further research.

• Include any major works you’re analyzing. In other words, provide a short discussion of the source material, whether it’s the diaries of a famous historical figure for a history dissertation, a work of literature, a piece of music, or a great work of art.
• Discuss the major theories you’re applying to make your argument.
• Cover your main argument.
• Talk about your conclusions.

• Include any methodology you used to conduct research.
• Provide an overview of any studies you conducted, including participants and the purpose of the study.
• Discuss major theories that you are using for analyzing your work, as well as how your research fits into the larger discussion. Remember to keep it brief.
• Don’t forget to discuss your conclusions, as well as how your research could lead to further research.

• Include major theories you are using to analyze your research.
• Talk about your research methods, especially if you are collecting data.
• Provide specifics if you are looking at a particular company or analyzing a particular model.
• Discuss your overall conclusions.

Writing Your Abstract

• The name of the article you have written.
• Publication information, if there is any.

• Remember, you’re just trying to give your reader an overview of your dissertation, not every detail.

• You should also include the sentence about your conclusion.

• Remember, you are not just summarizing your individual thoughts in your abstract, you are recreating the argument you make in your paper in a shortened form.

• For instance, if you’re an archaeologist, you need to reference your primary materials.
• If you’re a librarian, you should talk about the methods you’ve used to collect your research.
• If you’re a psychologist, talk about the way you conducted your study.

• Only include information that is in the paper; do not bring new ideas into the abstract.

• The way you implement your research in science includes methodology (how you carried out your experiment), but in a humanities paper, you’ll likely be talking about the theories you applied in your research (such as applying Foucault’s theories to a book like Wuthering Heights).

Expert Q&A

• If you wrote a scientific, sociological, or psychological dissertation (or any other type of dissertation requiring field research), be sure to include information on your methodology. Thanks Helpful 0 Not Helpful 0
• If you’re writing an abstract on a literature paper, be sure to include the major works you’re reviewing. Thanks Helpful 0 Not Helpful 0
• You can use some technical language if it is a technical paper. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ http://www.sciencebuddies.org/science-fair-projects/project_abstract.shtml
• ↑ http://writingcenter.unc.edu/handouts/abstracts/
• ↑ http://libguides.usc.edu/content.php?pid=83009&sid=621164
• ↑ http://librarybissell.act.edu/content.php?pid=136789&sid=1171531
• ↑ http://users.ece.cmu.edu/~koopman/essays/abstract.html
• ↑ https://owl.english.purdue.edu/owl/resource/656/01/

About this article

To write a dissertation abstract, start with a condensed version of your thesis that's no more than 1 sentence long. Then, include sentences about the methodology you used for your research and any major points or theories you analyzed. You should also include a sentence about the conclusions you drew based on your research. In general, try to keep your dissertation abstract between 100 and 200 words. To learn how to use an outline of your dissertation to write your abstract, keep reading! Did this summary help you? Yes No

Did this article help you?

• About wikiHow
• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

• How To Write A Perfect Thesis Abstract
• Writing guide

Thesis Abstract: Writing Techniques and Guidelines

Table of contents

Let professional writers deal with your paper, quickly and efficiently.

Thesis abstract is an essential part of the dissertation paper. It is a summary of a complete work. It gives readers a chance to discover the key points of your dissertation, its research chapter, methodology and results part. Writing a proper abstract is important. Students use various techniques and guidelines to perform a perfect thesis abstract. Proper structure and of thesis dissertation is crucial. It should answer all the study’s questions and be written to identify a major element of a dissertation or thesis paper. Also check other thesis writing tips that will lead you to success or contact our thesis writing service to get professional help with Ph.D. work.

Thesis Abstract Writing Guidelines

Thesis abstract answers the main questions of an entire paper. This short summary is a single page of text. It needs to show key methods used in a work, problems analyzed and gathered outcomes of a complex research work. This kind of academic assignment requires profound knowledge. People, who read abstracts, prefer those summaries that remain short, but very informative, with presented limitations in research and clear study results.

How to write the abstract of a thesis ? Thesis abstract is a small version of your dissertation or thesis. This small description ensures a better understanding of an entire paper, discovers the present condition of analyzed problems, distinguishes main objectives and determines existing expectations. A profound analysis of a major question is requested. Abstract needs to be less than five percent of the dissertation. Students write thesis abstracts of a proper length, get information for the summary using their own personal background information, knowledge and analyses’ fallouts.

Thesis abstract includes main analyzed objectives, compound research questions, problem statements, detailed dissertation methodology, and conclusions. Abstract needs to include source references and acronyms. It allows describing the top point of a dissertation paper providing a good understanding of the studied subjects and discovering numerous outcomes. Key theories and hypotheses are requested parts. They bring needed thesis abstract accurate form and allow saving time for this essential part flawless completion. Don't forget to check out thesis abstract examples provided by our professional writers at the end of this article.

Tips on How To Write Dissertation Abstract

Writing a proper summary requires a good knowledge of an analyzed theme, valuable background information, improved writing and analytical skills. Advanced analytical skills allow performing its professional version. Key theories need to be a part of the short summary, showing main objectives of conducted analyses and research works. Proper thesis abstract format includes the following major elements:

• general background information;
• research hypotheses;
• methodology;
• conclusions;
• implications.

The beginning of abstract needs to include general information. It draws readers’ attention, allows them discovering key research work’ objectives and outcomes of conducted studies when reading a single summary. However, don't confuse an abstract with an executive summary. Checking introduction, people get main information about conducted work. It is a kind of dissertation’s professional review. Writing a thesis abstract takes time for performing and must be performed after the entire dissertation paper is complete. It is clever to write it in such a way. It saves precious time and efforts used for editing in future.

Thesis abstract has a limit of words and describes the major purpose of research works, writer’s contribution to assigned problem-solving history. Many scientists have made great discoveries in their dissertations. Today, students face the same challenges. Numerous investigations are conducted with an aim to answer main questions of dissertation paper and provide appropriate indications. The level of papers’ difficulty depends on a scientist’s personal characteristics. They mostly include research skills and general knowledge.

Three Key Elements of a Thesis Abstract 

Begin by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer? You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information.

After identifying the problem, state the objective of your research. Use verbs like investigate, test, analyze  or evaluate to describe exactly what you set out to do. This part of the abstract can be written in the present or past simple tense, but should never refer to the future, as the research is already complete.

After - mention the research methods that you used to answer your question. This part should be a direct description of what you did in one or two sentences. It is usually written in the past simple tense as it refers to completed actions. 

There is no need to evaluate validity or obstacles you might have encountered in this part - the goal is not to give an account of the methodology strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used. Mention whether you have used quantitative or qualitative methods. 

Results and Conclusion

Next - summarize the main research results. This part of the abstract can be in the present or past simple tense. Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, provide the main conclusion in thesis : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense. If your aim was to solve a practical problem, the conclusions might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

Thesis Abstract Process of Writing

The literature review brings additional identifications and valuable sources of information. Writing down titles and authors of used works allows readers gaining additional sources of assigned problem discoveries and reaching data for calculations. Many analyses require accurate figures and numbers. You may connect present studies with investigations described in published articles and conducted by famous researchers in past. You show your own contributions and accounts. An abstract format may be updated many times. Each popular thesis abstract includes writer’s scores greatly described at the beginning of written dissertation work.

An accurate summary shows the author’s analytical and writing skills. It contains key objectives, research justifications, detailed methodology, writing techniques, major results and study statements. Never write thesis abstracts before completing a dissertation. Table of content and paper headings may be used as guidelines to write proper thesis abstract. Letting other people read your thesis abstract before submitting is important; it gives a chance to deal with possible mistakes in minutes. Thesis abstract includes various elements. It casts light on difficult methodology and identifies what your research problem is.

Experienced writers prefer writing a dissertation abstract after the entire paper was written and the results were reached. It allows creating a professional paper’s summary. Proper scientific content is important when readers generally read dissertation’s summaries first. This is a short version of the main paper allowing readers gaining the main information and building their own expectations about dissertation outcomes. This special content needs to be flawless and original.

Thesis abstract is an essential part of every dissertation paper. It is a professional summary of a complete dissertation work presented on a few pages at the beginning of the dissertation paper. It gives readers a chance to discover the key points of the dissertation, its research chapters, calculations, source references, methodology and results part. Writing a proper abstract is essential.

Students use various popular techniques and guidelines to perform perfect thesis abstract, including numerous summaries samples available online. Proper structure of short summary is crucial. It should answer all researches’ questions and be written to identify major elements and objectives of a dissertation. Thesis abstract answers main questions of the entire paper. This short summary is a single page of text. Every thesis abstract needs to show the key methods used in a work, problems analyzed and gathered outcomes of conducted complex research work.

Dissertation / Thesis Abstract Examples

Undergraduate level thesis abstract example.

Researcher: [Name Surname] Presentation Title: Characterization of Iron Deposition in Recombinant Heteropolymer Ferritins Research Focus: Chemistry School: [School Name] Presentation Type: Poster Presentation Abstract: Characterization of Iron Deposition in Recombinant Heteropolymer Ferritins Deneen Cole, Dr. Fadi Bou-Abdallah, SUNY Potsdam (NY, USA), Dr. Paolo Arosio, University of Brescia (Italy), Dr. Sonia Levi, Vita-Salute San Raffaele University (Italy) Ferritin is a ubiquitous iron storage and detoxification protein found highly conserved in species from bacteria to plants to humans. In mammals, ferritin is composed of two functionally and genetically distinct subunit types, H (heavy, ~21,000 Da) and L (light, ~19,000 Da) subunits which co-assemble in various ratios with tissue specific distribution to form a shell-like protein. The H-subunit is responsible for the fast conversion of Fe(II) to Fe(III) by dioxygen (or H2O2) whereas the L-subunit is thought to contribute to the nucleation of the iron core. In the present work, we investigated the iron oxidation and deposition mechanism in two recombinant heteropolymers ferritin samples of ~20H:4L (termed H/L) and ~22L:2H (termed L/H) ratios. Data indicates that iron oxidation occurs mainly on the H-subunit with a stoichiometry of 2Fe(II):1O2, suggesting formation of H2O2. The H/L sample completely regenerates its ferroxidase activity within a short period of time suggesting rapid movement of Fe(III) from the ferroxidase center to the cavity to form the mineral core, consistent with the role of L-chain in facilitating iron turn-over at the ferroxidase center of the H-subunit. In L/H, Fe(II) oxidation and mineralization appears to occur by two simultaneous pathways at all levels of iron additions: a peroxidation pathway with a 2Fe(II)/1O2 ratio and a mineralization pathway with a 4Fe(II)/1O2 resulting in an average net stoichiometry of ~3Fe(II)/1O2. These results illustrate how recombinant heteropolymer ferritins control iron and oxygen toxicity while providing a safe reservoir for reversible uptake and release of iron for use by the cell.

Graduate Level Thesis Abstract Example

Researcher: [Name Surname] Presentation Title: An Analysis of Yukon Delta Salmon Management Research Focus: Fisheries management related to Bering Sea fisheries and Yukon River salmon populations. School: [School Name] Student Level: Masters Presentation Type: Oral Presentation Abstract: The broad range of Pacific Alaskan salmon has resulted in the creation of a complex and multiorganizational system of management that includes the state of Alaska, various federal departments, a Congressionally-mandated fishery council, and a number of commercial and nongovernmental fish organizations. In the Bering Sea salmon are caught by the commercial groundfish fleet as by-catch. On the Yukon River salmon are commercially and traditionally harvested for both economic and cultural sustenance by the Yup’ik residents of the Yukon Delta. Declining salmon populations has driven scientific research which considers the effects of Bering Sea salmon by-catch. My research findings indicate that Bering Sea fisheries occur where juvenile salmon mature, directly impacting Yukon River salmon populations. Further, the research reflects that although Yukon salmon populations have plummeted, a recent effort was made to open the northern Bering Sea, which includes the Yukon River coastal shelf, to deep-sea commercial fishing. By researching the relationship of policy to cultural salmon dependence, it becomes evident that Alaskan salmon-tribes are excluded from salmon management and decision-making. Legal research reflects that three basic federal Indian concepts – inherent rights, Indian Country, and tribal right of occupancy – emerge as potential foundations that may allow Alaskan salmon tribes to begin sharing legal responsibility over salmon. Yukon River salmon are an international and anadromous species that require multi organizational management. My research reflects that current management favors the Bering Sea commercial fishing industry, despite data indicating Bering Sea fisheries impact Yukon salmon populations and an overall downward trend in Yukon salmon populations.

You may also like

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation

How to Write a Thesis or Dissertation Conclusion

Published on September 6, 2022 by Tegan George and Shona McCombes. Revised on November 20, 2023.

The conclusion is the very last part of your thesis or dissertation . It should be concise and engaging, leaving your reader with a clear understanding of your main findings, as well as the answer to your research question .

In it, you should:

• Clearly state the answer to your main research question
• Summarize and reflect on your research process
• Make recommendations for future work on your thesis or dissertation topic
• Show what new knowledge you have contributed to your field
• Wrap up your thesis or dissertation

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Discussion vs. conclusion, how long should your conclusion be, step 1: answer your research question, step 2: summarize and reflect on your research, step 3: make future recommendations, step 4: emphasize your contributions to your field, step 5: wrap up your thesis or dissertation, full conclusion example, conclusion checklist, other interesting articles, frequently asked questions about conclusion sections.

While your conclusion contains similar elements to your discussion section , they are not the same thing.

Your conclusion should be shorter and more general than your discussion. Instead of repeating literature from your literature review , discussing specific research results , or interpreting your data in detail, concentrate on making broad statements that sum up the most important insights of your research.

As a rule of thumb, your conclusion should not introduce new data, interpretations, or arguments.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

Depending on whether you are writing a thesis or dissertation, your length will vary. Generally, a conclusion should make up around 5–7% of your overall word count.

An empirical scientific study will often have a short conclusion, concisely stating the main findings and recommendations for future research. A humanities dissertation topic or systematic review , on the other hand, might require more space to conclude its analysis, tying all the previous sections together in an overall argument.

Your conclusion should begin with the main question that your thesis or dissertation aimed to address. This is your final chance to show that you’ve done what you set out to do, so make sure to formulate a clear, concise answer.

• Don’t repeat a list of all the results that you already discussed
• Do synthesize them into a final takeaway that the reader will remember.

An empirical thesis or dissertation conclusion may begin like this:

A case study –based thesis or dissertation conclusion may begin like this:

In the second example, the research aim is not directly restated, but rather added implicitly to the statement. To avoid repeating yourself, it is helpful to reformulate your aims and questions into an overall statement of what you did and how you did it.

Your conclusion is an opportunity to remind your reader why you took the approach you did, what you expected to find, and how well the results matched your expectations.

To avoid repetition , consider writing more reflectively here, rather than just writing a summary of each preceding section. Consider mentioning the effectiveness of your methodology , or perhaps any new questions or unexpected insights that arose in the process.

You can also mention any limitations of your research, but only if you haven’t already included these in the discussion. Don’t dwell on them at length, though—focus on the positives of your work.

• While x limits the generalizability of the results, this approach provides new insight into y .
• This research clearly illustrates x , but it also raises the question of y .

You may already have made a few recommendations for future research in your discussion section, but the conclusion is a good place to elaborate and look ahead, considering the implications of your findings in both theoretical and practical terms.

• Based on these conclusions, practitioners should consider …
• To better understand the implications of these results, future studies could address …
• Further research is needed to determine the causes of/effects of/relationship between …

When making recommendations for further research, be sure not to undermine your own work. Relatedly, while future studies might confirm, build on, or enrich your conclusions, they shouldn’t be required for your argument to feel complete. Your work should stand alone on its own merits.

Just as you should avoid too much self-criticism, you should also avoid exaggerating the applicability of your research. If you’re making recommendations for policy, business, or other practical implementations, it’s generally best to frame them as “shoulds” rather than “musts.” All in all, the purpose of academic research is to inform, explain, and explore—not to demand.

Make sure your reader is left with a strong impression of what your research has contributed to the state of your field.

Some strategies to achieve this include:

• Returning to your problem statement to explain how your research helps solve the problem
• Referring back to the literature review and showing how you have addressed a gap in knowledge
• Discussing how your findings confirm or challenge an existing theory or assumption

Again, avoid simply repeating what you’ve already covered in the discussion in your conclusion. Instead, pick out the most important points and sum them up succinctly, situating your project in a broader context.

The end is near! Once you’ve finished writing your conclusion, it’s time to wrap up your thesis or dissertation with a few final steps:

• It’s a good idea to write your abstract next, while the research is still fresh in your mind.
• Next, make sure your reference list is complete and correctly formatted. To speed up the process, you can use our free APA citation generator .
• Once you’ve added any appendices , you can create a table of contents and title page .
• Finally, read through the whole document again to make sure your thesis is clearly written and free from language errors. You can proofread it yourself , ask a friend, or consider Scribbr’s proofreading and editing service .

Here is an example of how you can write your conclusion section. Notice how it includes everything mentioned above:

V. Conclusion

The current research aimed to identify acoustic speech characteristics which mark the beginning of an exacerbation in COPD patients.

The central questions for this research were as follows: 1. Which acoustic measures extracted from read speech differ between COPD speakers in stable condition and healthy speakers? 2. In what ways does the speech of COPD patients during an exacerbation differ from speech of COPD patients during stable periods?

All recordings were aligned using a script. Subsequently, they were manually annotated to indicate respiratory actions such as inhaling and exhaling. The recordings of 9 stable COPD patients reading aloud were then compared with the recordings of 5 healthy control subjects reading aloud. The results showed a significant effect of condition on the number of in- and exhalations per syllable, the number of non-linguistic in- and exhalations per syllable, and the ratio of voiced and silence intervals. The number of in- and exhalations per syllable and the number of non-linguistic in- and exhalations per syllable were higher for COPD patients than for healthy controls, which confirmed both hypotheses.

However, the higher ratio of voiced and silence intervals for COPD patients compared to healthy controls was not in line with the hypotheses. This unpredicted result might have been caused by the different reading materials or recording procedures for both groups, or by a difference in reading skills. Moreover, there was a trend regarding the effect of condition on the number of syllables per breath group. The number of syllables per breath group was higher for healthy controls than for COPD patients, which was in line with the hypothesis. There was no effect of condition on pitch, intensity, center of gravity, pitch variability, speaking rate, or articulation rate.

This research has shown that the speech of COPD patients in exacerbation differs from the speech of COPD patients in stable condition. This might have potential for the detection of exacerbations. However, sustained vowels rarely occur in spontaneous speech. Therefore, the last two outcome measures might have greater potential for the detection of beginning exacerbations, but further research on the different outcome measures and their potential for the detection of exacerbations is needed due to the limitations of the current study.

Checklist: Conclusion

I have clearly and concisely answered the main research question .

I have summarized my overall argument or key takeaways.

I have mentioned any important limitations of the research.

I have given relevant recommendations .

I have clearly explained what my research has contributed to my field.

I have  not introduced any new data or arguments.

You've written a great conclusion! Use the other checklists to further improve your dissertation.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

For a stronger dissertation conclusion , avoid including:

• Important evidence or analysis that wasn’t mentioned in the discussion section and results section
• Generic concluding phrases (e.g. “In conclusion …”)
• Weak statements that undermine your argument (e.g., “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

The conclusion of your thesis or dissertation shouldn’t take up more than 5–7% of your overall word count.

The conclusion of your thesis or dissertation should include the following:

• A restatement of your research question
• A summary of your key arguments and/or results
• A short discussion of the implications of your research

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. & McCombes, S. (2023, November 20). How to Write a Thesis or Dissertation Conclusion. Scribbr. Retrieved July 22, 2024, from https://www.scribbr.com/dissertation/write-conclusion/

Is this article helpful?

Tegan George

Other students also liked, how to write a discussion section | tips & examples, how to write an abstract | steps & examples, how to write a thesis or dissertation introduction, get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts